Abstract:In this paper, a microwave polarizer based on frequency selective surface (FSS) loaded with complementary split ring resonator (CSRR) for non-planar and conformal application is presented. The frequency-selective polarizer is fabricated on liquid crystal polymer substrates (LCPs) material with $50\mu \text{m}$ thickness, which shows very good mechanical flexibility for microwave band. The Frequency-selective polarizer consists of a metal FSS screen pair with double complementary split ring resonators aligned in the vertical direction without any displacement. The substrate integrated waveguide (SIW) cavity was introduced to enhance the Q-factor of the CSRR particles and the mechanical strength of the FSS screens at bending conditions. The measured results show that the CSSR-FSS polarizer with the minimum transmission loss for TE-polarization incidence wave is 0.75dB at the 10.24 GHz and 19.05 dB for TM-polarization incidence wave, with an extinction ratio of 18.3dB. Finally, the oblique incidence from normal to 60 degrees and bending tests with the bending radius of 9.8 cm and 8.8 cm of the CSRR-FSSs were also carried out, and the measured results indicate that the CSRR-FSS show a low susceptibility to bending behavior at the small bending radius beyond the 8.8 cm and different incidence angles from normal to 45 degrees. Both the simulated and experiment data indicated that the proposed ultra-thin CSRR-FSS shows excellent flexibility and polarization selectivity.

Circuit Model for a Textile Linear-to-Circular Polarizer Using Swastika-Shaped FSS

A Highly Tunable Sub-Wavelength Chiral Structure For Circular Polarizer

Polarization Control by Using Anisotropic 3-D Chiral Structures

Flexible Rotation of Linear Polarization Conversion with a Frequency Selective Surface.

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

Broadband Tunability of Polarization-Insensitive Absorber Based on Frequency Selective Surface

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Microwave Polarizer Based on Complementary Split Ring Resonators Frequency-Selective Surface for Conformal Application

A Broadband Tunable Frequency Selective Surface Absorber For Oblique Incidence Applications

Transmission-Type Frequency Selective Surface with Polarization Modulation

Novel Dual-Polarization Multimode Artificial Frequency-Selective Surface with Independently Reconfigurable Windows for Different Frequencies

Textile Bandwidth-Enhanced Polarization-Reconfigurable Half-Mode Substrate-Integrated Cavity Antenna

A Dual-Band Polarization-Insensitive Frequency Selective Surface for Electromagnetic Shielding Applications

Influence of Flexible and Textile Substrates on Frequency-Selective Surfaces (FSS)

Low-Profile FSS-Based Polarization-Insensitive Rasorber with Switchable Transmission Band

Asymmetric Fission Transmission of Linear-to-Circular Polarization Converter Using Bi-layer Split Ring Structure

A Switchable Frequency Selective Surface With Polarization Selectivity In Microwave Based On The Rotatable Magnet

A new method for synthesis and designing transmissive linear-to-circular polarization converters based on branch line circuit model

A Flexible Multifunctional Active Frequency Selective Surface With Angular and Polarization Stability for Curved Surface Conformal

An Ultrawideband Linear-to-Circular Polarizer Based on a Phase Difference Complementary Scheme

Wideband design and modeling of efficient multi-resonance reflective linear-to-circular polarization converter