Abstract:The poor redissolution and low ethanol resistance stability of room temperature self-cross-linking polyacrylate latexes (RTSPLs) made from conventional emulsifiers are the main obstacles for their industrial application in water-based inks. To address these issues, in this study, anionic SR-10 (allyloxy polyoxyethylene ammonium sulfate) /nonionic ER-10 (allyloxy fatty alcohol polyoxyethylene ether) dual-reactive composite emulsifier is developed to replace the conventional 2A1 (sodium dodecyl diphenyl ether disulfonate) /TX-30 (alkyl phenol polyoxyethylene ether) non-reactive composite emulsifier for the synthesis of polyacrylate latexes, and a certain mass of nanosized zinc oxide (ZnO) was added into as-prepared latexes as an ionic cross-linking agent to partially replace the cross-linking monomer of diacetone acrylamide (DAAM). Properties of the latexes and the latex films, with emphasis on redissolution, stability against ethanol, and adhesion on biaxially oriented polypropylene (BOPP) and polyethylene (PE) substrates, were evaluated to study the effect of the reactive emulsifiers and the nanosized ZnO. The application of the reactive composite emulsifier eliminates the disadvantages associated with the desorption from the latex particles and migration during film formation of the non-reactive emulsifier, thus improving the ethanol resistance stability of latexes and adhesion of their inks on BOPP substrate. The introduction of a certain amount of nanosized ZnO to replace DAAM in equimass amounts improves the redissolution but reduces the cross-linking density and water resistance of the latex film. Surprisingly, the addition of nanosized ZnO substantially improves the ethanol stability of latexes. When ZnO replaces DAAM, accounting for approximately 1 wt% of the total monomers, not only the prepared latex exhibits excellent alcohol dilution stability, but also the latex film has a relatively high cross-linking density, good redissolution, and good comprehensive properties. These findings provide an effective, yet simple way to balance the redissolution and high cross-linking degree of latex films while ensuring that the latexes have good ethanol resistance stability.

Making alkyd greener: Modified cardanol as bio-based reactive diluents for alkyd coating

Synthesis and properties of alkoxysilane-modified acrylic latex via miniemulsion polymerization

Organic-inorganic hybrid coating materials derived from renewable soybean oil and amino silanes

Preparation and characterization of cardanol based vinyl ester resins as cross‐linker units

Synthesis of acrylic-modified water-reducible alkyd resin: improvement of corrosion resistance in painting formulations

Acetalization of Carbonyl Compounds with 2,2,4-Trimethyl-1,3-pentanedio Catalyzed by Novel Carbon Based Solid Acid Catalyst

Room-temperature Production of Bio-Based Aldehydes from Vegetable Oil-Derived Epoxide Via H2WO4@Al-MCM-41 As Recyclable Catalyst

High Efficient Acetalization of Carbonyl Compounds with Diols Catalyzed by Novel Carbon-Based Solid Strong Acid Catalyst

Role of Bio-Based and Fossil-Based Reactive Diluents in Epoxy Coatings with Amine and Phenalkamine Crosslinker

Alkyd resins: From down and out to alive and kicking

Waterborne hybrid (alkyd/styrene acrylic) emulsion polymers and exterior paint applications

Selective Hydrogenation of Polyenes in Biomass-Derived Cardanol over the Trimetallic Ni–Co–Cu Catalyst Supported on Morphologically Controlled Alumina

Evaluation and Improvement of Bio-Based Sustainable Resin Derived from Formic-Acid-Modified Epoxidized Soybean Oil for Packaging Applications

Phosphorus Modified Cardanol: A Greener Route to Reduce VolaTile Organic Compounds and Impart Flame Retardant Properties to Alkyd Resin Coatings

Low-Shrinkage and Degradable UV Imprint Lithography Based on Biomass-Derived Epoxidized Soybean Oil and Cardanol

Green and efficient production of functionalized graphene to achieve soybean meal-based adhesive enhancement

Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

Bio-based superhydrophobic coatings from cashew nut for self-cleaning and long-term anticorrosion applications

Copolymerization of Biomass-Derived Carboxylic Acids for Biobased Acrylic Emulsions

Improving the performance of polyacrylate latex binders for water-based inks through the application of reactive emulsifiers and nanosized zinc oxide

Versatile Epoxidized Soybean Oil-Based Resin with Excellent Adhesion and Film-Forming Property