Abstract:This article is focused on the development and characterization of highly controllable magnetorheological materials for stiffness and damping control in semi-active control applications. Two types of magnetorheological materials are developed in-house: magnetorheological elastomer with soft base elastomer, and magnetorheological fluid encapsulated in regular elastomer, namely magnetorheological fluid-elastomer. In both cases of magnetorheological elastomers and magnetorheological fluid-elastomers, the samples are evaluated using in-house-developed shear and compression test rigs, which are equipped with electromagnets and Hall effect sensors for measuring the magnetic field. These features provide the capability to precisely control a wide range of magnetic fields during the experiments. In the case of magnetorheological elastomers, the experimental results of the in-house magnetorheological elastomers are compared with commercially available counterparts made of hard base elastomer. It is shown that the controllability of the material, that is, the relative magnetorheological effect, is significantly improved in the case of magnetorheological elastomer with soft base elastomer. In addition to various magnetic fields, the samples are subjected to a range of loading amplitudes and frequencies. A general trend is observed where the frequency and strain amplitude cause an opposite effect on both the shear and compressive moduli: the increase in frequency gives rise to a higher value of modulus whereas the increase in amplitude reduces the modulus. Furthermore, the effect of bonding on the performance of the magnetorheological elastomers in compression mode is evaluated and the results indicate a significant increase in the modulus and decrease in the loss factor. In all the cases, however, the change of loss factor does not exhibit a predictable trend as a function of magnetic fields. In order to investigate a magnetorheological-based solution for controlling the damping of a semi-active system, magnetorheological fluid-elastomer samples are made in-house. These samples are fabricated using three different iron concentrations, and are tested in compression (squeeze) mode. The results of these experiments confirm that the equivalent damping coefficient of the material rises with the increase in magnetic field, and this effect becomes stronger as the iron concentration of magnetorheological fluids increases. It is also demonstrated that the magnetorheological effect is highly dependent on the loading frequency and amplitude, where the equivalent damping coefficient decreases with the increase in loading frequency and amplitude. In all the aforementioned cases, the stiffness of magnetorheological fluid-elastomers exhibits minor changes, which offers the in-house-developed magnetorheological fluid-elastomers as a damping only control option, a development that is different from the magnetorheological fluid-elastomers reported in the literature.

Magnetorheological Elastomer Peristaltic Fluid Conveying System for Non-Newtonian Fluids with an Analogic Moisture Loss Process

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Magnetorheological elastomer peristaltic pump capable of flow and viscosity control

Smart magnetorheological elastomer peristaltic pump

Non-Invasive Manipulation of Two-Phase Liquid-Liquid Slug Flow Parameters Using Magnetofluidics

Modeling and Performance Analysis of a Magnetorheological Fluid Actuation System

A New Magnetorheological Fluid–elastomer Mount: Phenomenological Modeling and Experimental Study

A New Bypass Magnetorheological Fluid Damper

Experimental study of magnetorheological fluids under large periodic deformations

Fabrication and characterization of highly controllable magnetorheological material in compression mode

Position Tracking Control of a Magnetorheological Fluid Actuation System

Structural design and performance study of permanent magnet safety coupling based on magnetorheological transmission technology

Design of a Novel Magnetorheological Damper with Large Damping Force and Its Nonlinear Modeling at High Velocity

Dynamic Sealing Using Magneto-Rheological Fluids

Theoretical Analyses and Experimental Research on Micro-Nano Composite Magnetorheological Grease for Sealing Liquids with Different Viscosities

Squeeze Behavior of Magnetorheological Fluids under Constant Volume and Uniform Magnetic Field

A Unified Approach for Flow Analysis of Magnetorheological Fluids

Research on the backpressure and backflow of a ferrofluid linear pump

Unsteady flow of hybrid fluid via peristaltic pumping in wavy micro-tube under electric and magnetic field effects: An application of Hall device and slip boundary

Compression Behaviors of Magnetorheological Fluids under Nonuniform Magnetic Field

Balanced Devil Triangle: A Satisfactory Comprehensive Performance Magnetorheological Fluids with Cross‐Scale Particles