Abstract:Magnetorheological (MR) fluids are representatives of smart materials. They react to magnetic fields by developing a yield stress. The effect has been employed in real-world applications such as automotive chassis systems or optical finishing. By convention, MR devices can be operated in at least one of the fundamental modes: flow, shear, squeeze, gradient pinch of which the former has been the least studied and understood. In pinch mode, the material in the flow channel is exposed to non-uniform magnetic fields in the direction parallel to fluid flow. As a result, only the volume of MR fluid near the channel walls are energized to modify the particular material property (yield stress). The result is the channel's effective diameter change. The behavior of the material in pinch mode is unique and unseen in the other controllable fluids. To study the material's characteristics in the specific mode, the authors developed a novel circuit concept for energizing the material in an effort to achieve the 'true-zero' pinch mode magnetic behavior. Contrary to the existing pinch mode valve concepts, the concept valve allows to achieve zero magnetic flux density in the center of the flow channel regardless of the current level. To test the hypothesis a prototype valve was modeled, manufactured and tested across a range of external (flow rate, current/magnetic flux) stimuli. The obtained results yield sufficient evidence proven by results of magnetic simulations to support the underlying hypothesis. The experimental results illustrate the pinch mode type behaviour, i.e. the slope change in the pressure vs flow rate characteristics.

Squeeze Behavior of Magnetorheological Fluids under Constant Volume and Uniform Magnetic Field

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Compression Behaviors of Magnetorheological Fluids under Nonuniform Magnetic Field

Characteristic analysis and squeezing force mathematical model for magnetorheological fluid in squeeze mode

Squeeze flow behaviors of magnetorheological plastomers under constant volume

Squeeze behaviors of magnetic powders between two parallel plates

Magnetic circuit design for the performance experiment of shear yield stress enhanced by compression of magnetorheological fluids

Magnetorheological Damper Working in Squeeze Mode

An Experimental Investigation on the Normal Force Behavior of Magnetorheological Suspensions

Optimization of the Magnetic Property of a Magnetorheological Squeeze Mount

Normal Forces of Magnetorheological Fluids under Oscillatory Shear

An Experimental Study on the Normal Stress of Magnetorheological Fluids

Controllability of a Magnetorheological Fluid Squeeze Film Damper under Sinusoidal Magnetic Field

Grasping the behavior of magnetorheological fluids in gradient pinch mode via microscopic imaging

Magnetic-Field-Induced Normal Force of Magnetorheological Elastomer under Compression Status

Magnetic Field-Induced Compressive Property of Magnetorheological Elastomer under High Strain Rate

Experimental and modeling investigations on the quasi-static compression properties of isotropic silicone rubber-based magnetorheological elastomers under the magnetic fields ranging from zero to saturation field

True pinch mode of magnetorheological fluids

Stick-slip Behavior of Magnetorheological Fluids in Simple Linear Shearing Mode

Influence of shear deformation on the normal force of magnetorheological elastomer

Numerical Investigation on Yielding Phenomena of Magnetorheological Fluid Flowing Through Microchannel Governed by Transverse Magnetic Field