Abstract:Novel energy generation technologies, such as high-permeability wind power and photovoltaic systems, exhibit inherent intermittency, randomness, and volatility. During periods of energy production from these sources, the impedance of the electrical grid frequently experiences significant fluctuations. Consequently, the grid manifests characteristics akin to a weak grid, highlighting the challenges associated with integrating renewable energy sources with variable output profiles. These fluctuations lead to a shift in resonance spikes of the LCL-type filter towards the lower frequency band, consequently impacting the stability of inverter grid connections. To mitigate this issue, the present study introduces a novel approach integrating the D-split method and a proportional–differential feedforward strategy. This combination aims to reshape the inverter's output impedance, ensuring its consistent stability even amidst significant fluctuations in grid impedance. In this research, the optimal controller parameters for systems operating under robust grid conditions are initially determined. This selection process involves the application of the D-split method, supported by graphical visualization. Additionally, the amplitude and phase angle margin tester is employed while considering the system bandwidth as a limiting constraint. Moreover, accounting for the influence of grid impedance, the D-split method is reapplied to ascertain the most suitable values for the proportional–differential feedforward parameters. This adjustment aims to enhance the adaptability of the grid-connected inverter specifically in scenarios characterized by a weak grid. The hardware-in-the-loop (HIL) simulation results demonstrate that despite the presence of harmonics within the grid and a short circuit impedance ratio (SCR) of 3, the inverter maintains grid stability and effectively suppresses harmonics. Moreover, the total harmonic distortion factor (THD) of the grid-connected current remains below 5%.

Impedance Reshaping of Grid-tied Inverters to Damp the Series and Parallel Harmonic Resonances of Photovoltaic Systems

Resonance suppression for grid-connected multi-inverter based on active damping method

Inverter Admittance Phase-Reshaping Strategy for Enhancing Its Robustness to Grid Impedance.

Harmonics Suppression for Single-Phase Grid-Connected Pv Systems in Different Operation Modes

Current Harmonics from Single-Phase Grid-Connected Inverters—Examination and Suppression

Design of Grid-tied Inverters with the Functions of Reactive and Harmonic Compensation

Interharmonics from Grid-Connected PV Systems: Mechanism and Mitigation

Control Strategy for Grid-Connected Inverter in Photovoltaic Power Generation System

Analysis and Suppression of Harmonic Resonance in Photovoltaic Grid-Connected Systems

A Series Impedance Reshaping Control Method Considering PLL Dynamics for Grid-Connected Inverters under Weak Grid Conditions

Current Harmonic Suppression For Grid-Connected Vsg Based On Virtual Harmonic Impedance

Coordination of Multiple Grid-Connected Inverters for Harmonic Compensation

A Phase-Shifting MPPT to Mitigate Interharmonics from Cascaded H-Bridge PV Inverters

The Control Strategy for the Grid-Connected Inverter Through Impedance Reshaping in q -Axis and its Stability Analysis Under a Weak Grid

High Frequency Resonance Suppression Strategy of Three-Phase Four-Wire Split Capacitor Inverter Connected to Parallel Compensation Grid

Designing Parameters to Reshape the Inverter Output Impedance Based on the D-Split Method under Weak Grid Conditions

Harmonic Resonance Suppression With Inductive Power Filtering Method: Case Study of Large- Scale Photovoltaic Plant in China

Resonance Suppression of Multi‐Inverter Systems Based on Global Admittance Reshaping

High Frequency Resonance Analysis and Resonance Suppression of a Grid-Connected Inverter Coupled With a Long Feeder

A Hybrid Multi-resonances Suppression Method for Nonsynchronous LCL-type Grid-connected Inverter Clusters under Weak Grid

Research on Suppression Strategy for Distribution System with Multiple Inverters Based on Impedance Reshaping