Abstract:This study presents the idea of using a porous media burner to improve the oxy-methane combustion reaction rate and broaden the stability limit. Numerical studies on the premixed combustion of CH4/O2/CO2 in a two-layer porous medium burner using a two-dimensional symmetrical volume-average model with the skeleton mechanism based on OpenFOAM. The combustion characteristics of burners with variable cross-sectional (VC) and straight cylindrical (SC) structures were compared, including stable range, temperature field, thermal cycle efficiency, and CO emissions. It is confirmed that the cross-sectional structure is effective for broadening the stable range, and the broadening rate is more than 4 times. As more heat is lost from the outlet due to the increased cross-section, the solid-phase temperature of VC is lower than that of SC. As a result, the flame temperature of VC will be about 200 K lower than that of SC under the condition of insulated walls. It also leads to a reduction of about 2% in thermal cycle efficiency compared with SC. Meanwhile, it is shown that the VC structure slightly increases CO emissions at low thermal power but is smaller than that of SC at high power. When the wall heat loss of the burner is considered, the VC structure is still effective for improving the stable range. In addition, the VC structure slightly affects flame tilt and temperature uniformity at the burner outlet when the thermal power is large. It is confirmed that the VC structure is effective for increasing the power adjustment range and reducing pollutant emissions at high power.

Research on the Cold Flow Field of Petroleum Coke Powder Oxygen-enriched Burner by Infrared Image Processing

Experimental study and numerical simulation of apetroleum coke oxyfuel burner

OXYGEN-ENRICHED COMBUSTION IN A HORIZONTAL FURNACE AND THREE- DIMENTIONAL NUMERICAL SIMULATION TEST THEREOF

Numerical investigation on oxy-combustion characteristics of a 200MW e tangentially fired boiler

TEST STUDY ON OUTLET FLOW FIELD PERFORMANCE FROM WAVE-SHAPED COMBUSTION-STABILIZING BODY OF THE CONCENTRATION TUNABLE RICH/LEAN BURNERS

Principle and Experimental Study of Oxygen-Enriched High Temperature Air Combustion Burner

The Principle And Performance Analysis Of Oxygen-Enriched Oil-Saving Combustion Technology For Pulverized Coal Firing

Flow Characteristic Of A New Type Of Double-Channel Air Burner In Direct Flow Pulverized Coal Boiler

Research on Flow Characteristics of Burners with Jets Having External-Straight and Internal-Swirling Coaxial Flow Matched with Parallel Secondary Air Jet Groups

Experimental Study of O2/CO2 Swirled Burner of Pulverized Coal on Flow Field and Combustion

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Spectral Energy Characteristics of Radiation in Oxy-Coal Combustion for Energy Utilization

Numerical Predictions on the Influences of Inlet Temperature and Pressure of Feed Gas on Flow and Combustion Characteristics of Oxy-pulverized Coal Combustion

E207 USING LIGHT FLUCTURATION METHOD TO STUDY THE GAS-SOLID BURNER FLOW

Numerical Study of the Combustion Process in the Vertical Heating Flue of Air Staging Coke Oven

Effect of the Cross-Section of a Porous Burner on the Combustion Stability Limit of Premixed Oxy-Methane Flames

Theoretical analysis of combustion process in pulverized coal fired burner using jets with velocity difference (I)

Experimental study on cold two-phase flow in swirl burner exit

Flow Behavior of High-Temperature Flue Gas in the Heat Transfer Chamber of a Pilot-Scale Coal-Water Slurry Combustion Furnace

Study On Characters Of Flow, Heat Transfer And Combustion Of Petroleum Coke Residual Oil Slurry

A Research on Petroleum Coke Combustion Characteristics