Abstract:The application of nanomaterials in petroleum industry is becoming common. Nanofluids are used as the water phase in the process of water alternating gas injection. Previous studies mainly focused on the effect of nanoparticles on the pore throat properties of porous media or the effect of nanofluids on crude oil emulsification. However, in the process of water gas alternating displacement, the relative flow of water and gas affects the displacement front and gas breakthrough time. Therefore, it is significant to study the effect of nanoparticles on mass transfer at gas-liquid interface. Based on the good dispersion and unique physical properties of nanoparticles in the base solution, in the process of alternating injection of CO2 and water, water is used as the base solution and nanoparticles are added to form a uniformly dispersed nanofluid. In this study, the enhancement of mass transfer by nanoparticles at the gas-liquid interface was studied. The theoretical model of the micro mass transfer at the gas-liquid interface during the percolation of nanofluid and CO2 in porous media was deduced. Combined with the absorption experiment of CO2 mixture, the enhancement effect of nanoparticles on mass transfer process was verified. Different factors affecting CO2 absorption were also compared. The main fluids used in the experiment were deionized water, SiO2, TiO2 and Al2O3 nanofluids. The experimental results of different nanofluids show that TiO2 nanoparticles enhance the mass transfer most obviously, and SiO2 inhibits the mass transfer when the content exceeds a certain content. In addition, the optimum absorption concentrations of the three nanoparticles are in the range of 0.06–0.08 wt‰. Combined with the relative permeability experiment, the influence of nanoparticles on the law of gas-liquid relative permeability is further revealed. This experimental result provides a theoretical guidance for the application of nanoparticles in enhancing oil recovery.

Overview of Studies on Gas-liquid Mass Transfer Enhancement in the Presence of Fine Particles

Process intensification in gas-liquid mass transfer by nanofluids: Mechanism and current status

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Mass Transfer Characterization for Hydrocarbon Liquid–particle Collision Based on Sensitive Tracing of Fluorescent Probe

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Effects of nanoparticles with different wetting abilities on the gas–liquid mass transfer

Mass Transfer and Droplet Behaviors in Liquid-Liquid Extraction Process Based on Multi-Scale Perspective: A Review

Modeling investigation of mass transfer of gas-liquid-liquid dispersion systems

Mass Transfer and Chemical Properties of Nano-Micron Fluids

Experimental verification of the effects of three metal oxide nanoparticles on mass transfer at gas-liquid interface

Review on the Nanoparticle Fluidization Science and Technology

The gas–liquid mass transfer and pressure drop behaviors of the gas–liquid–liquid three‐phase flow in micro‐packed beds

Mass transfer enhancement and hydrodynamic performance with wire mesh coupling solid particles in bubble column reactor

A new gas-liquid mass transfer enhancement method for a multi-downcomer sieve tray: Bubble breakup by falling droplets

Enhancing gas–liquid volumetric mass transfer coefficient

Hydrodynamics of gas-liquid microfluidics: A review

Mass transfer mechanism and relationship of gas–liquid annular flow in a microfluidic cross-junction device

Research progress of gas dispersion in stirred vessel with medium or high viscosity fluids