Three dimensional simulation technology of separated cooling type transformer based on finite volume method

魏本刚,吴楠楠,任晓明,戴明秋
DOI: https://doi.org/10.16081/j.issn.1006-6047.2018.02.023
2017-01-01
Abstract:There are obvious differences between separated cooling system and conventional cooling system of transformers in the radiator mounting position and installation modes.Due to the specific characteristics of separated cooling system,the parameter setting and model construction in simulation research are complicated,so the researches on thermal simulation for separated cooling system is few,and it is difficult to identify the accuracy of simulation.More deeper simulation research and trial comparisons are needed.The separated cooling experiments of a 10 kV oilimmersed transformer under three different layouts of transformer and radiator are carried out.The three dimensional fluid-structural-thermal coupling simulation model of the tested transformer and its panel-type radiator is established based on the layout of the transformer and the radiator.The finite volume method is adopted to solve the temperature field distribution of transformer and the transformer and its panel-type radiator,the hot spot temperature of transformer is obtained.The simulative results are compared with the experimental data and IEEE standard calculation results,which shows that the errors of winding temperature rise and top oil temperature rise obtained by simulation are respectively 16.6 K and 15.15 K lower than those of IEEE standard calculation results.It verifies the accuracy and engineering practicability of the proposed simulation model.The analysis shows that if the height of radiator center in the tested model is increased by 2 meters,the hot spot temperature will be decreased by 7.9 K,and if the horizontal distance between radiator and transformer is shortened by 3.5 meters,the hot spot temperature will be increased by 4.1 K,which shows the effect of the layout of separated cooling system on hot spot temperature of transformer.
What problem does this paper attempt to address?