Abstract:Vacuum circuit breakers have been being widely used in the electric power system in recent years for its excellent breaking capability. The whole interrupting process can be divided into two main stages: the arcing phase and the post-arc dielectric recovery phase. The later phase has a decisive effect on the whole interruption which has attracted many concerns. The dissipation of the residual plasma emitted from the cathode spots under the transient recovery voltage is the first stage of the post-arc dielectric recovery phase. At the moment of current zero, the ions are accelerated into the post-arc cathode, whereas the electrons reverse to the post-arc anode when the fast increasing transient recovery voltage imposes on the post-arc cathode. As a result, an ion sheath forms in front of post-arc cathode and develops to the post-arc anode. The post-arc current forms during the sheath expanding process. The continuous transition model and the hybrid Maxwell-Boltzmann model have been applied to the study of the dissipation of the residual plasma. A more self-consistent full particle-in-cell model, which treats both ions and electrons as macro particles, has been developed for the study of the influence of plasma temperature in previous work1. In this paper, a particle-in-cell model is adopted for the simulation. The measurement results of post-arc current and the transient recovery voltage are taken from the reference 2 The residual plasma temperature is estimated with the theory of ion rarefaction wave. The residual plasma density is estimated by the integration of post-arc current from measurement with some modification. From the simulation we can obtain a post-arc current waveform which is closer to that from the measurement.

Dielectric Recovery Process of Multiple Re-ignition Phenomena After Small Inductive Current Interruption in Vacuum

Research On Post-Arc Reignition Phenomena For 40.5kv Vacuum Interrupter

Fully Kinetic Model Of Breakdown During Sheath Expansion After Interruption Of Vacuum Arcs

Dielectric recovery behaviors after low current interruption measured by submicrosecond voltage impulses

Study on Dielectric Recovery Characteristic of Vacuum Interrupter after High Frequency Interruption

Study on the Influencing Factors of Reignition Characteristics for 40.5kv Vacuum Circuit Breakers

Dielectric Recovery Strength after Vacuum Arc Extinctions

Transient MHD Modeling and Simulation of High-Current Vacuum Arc Under Three Kinds of Interruption Processes

Collision effects on sheath development after interrupting a vacuum arc

Transient Modeling and Simulation of High Current Vacuum Arc under Different Conditions

Recovery of breakdown strength of a vacuum interrupter after extinction of high currents

Influence of Residual Transverse Magnetic Field on Sheath Expansion Process in Vacuum Interruption

Post-arc current simulation based on measurement in vacuum circuit breaker with a one-dimensional particle-in-cell model

The reignition characteristics of double vacuum interrupters in series after interrupting vacuum arcs

Study Of The Dissipation Of Residual Plasma With A One-Dimensional Particle-In-Cell Model In A Vacuum Circuit Breaker

Simulation and Protection of Reignition Overvoltage in Wind Farm Considering Microscopic Dielectric Recovery Process of Vacuum Circuit Breaker

Research on the current-zero period of vacuum arc interruption and equivalent model of post-arc gap

Research on the Transient Interrupting Voltage of Mechanical HVDC Circuit Breaker and Its Influences on the Postarc Dielectric Recovery Process

Research on Dielectric Recovery Characteristic after Large Capacity DC Interruption

Capacitive Switching of Vacuum Interrupters and Inrush Currents

Investigation of the Dielectric Recovery Process of Vacuum Arc in Double Breaks by Planar Laser-Induced Fluorescence