Abstract:As the non-uniform rational B-spline, or NURBS, is capable of exactly representing conic and more general quadric functions, and also representing the various polynomial types that we have already met, it is widely used in a number of CAD systems today for the representation of geometry. In manufacturing domain, however, the conventional approaches for NURBS curve machining use a sequence of straight lines to approximate the part profile. All generated straight lines are subsequently translated into linear G-codes by a post processor, and then sent to the CNC system. Such kind of process limits the curve machining capability of existing CNC systems. In contrast, our contribution has investigated a real-time approach for NURBS curve machining on CNC machine tools. The real-time approach, called CNC NURBS interpolator, can read the coefficients of NURBS, as well as cutting conditions and perform curve machining interpolation. This brings better machining feedrate controls, interpolates more precise machining commands, and requires less machining time compared to that reduced by off-line approaches. A multi-axis cross-coupled control (CCC) strategy is utilized to gain better axial dynamic performances, and then to enhance higher machining accuracy. A servo control model has been set up and some simulation work has been carried out. The simulation results have demonstrated that this approach can reduce the contour error significantly resulting from dynamic performance variance of each machine axis.

5-axis NC systems with interpolator for NURBS surface based on STEP-NC

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

Development of A Step-Nc Controller for 5-Axis Machining of Nurbs Surfaces

Five-axis STEP-NC Controller for Machining of Surfaces

A 5-Axis Milling System Based on A New G Code for Nurbs Surface

Constructing and Processing of NC Instruction for 5-Axis Machining of NURBS Surfaces

A Real-time NURBS Surface Interpolator for 5-Axis Surface Machining

An Open CNC for Machining NURBS Surfaces Based on STEP-NC

Interpolation for Non-Uniform Rational B-spline Surface Based on STEP-NC

Five-axis Tool Path Generation in CNC Machining of T-spline Surfaces

Realization Method of NURBS Path Generation for 5-Axis CNC Controller

5-Axis Polynomial Spline Interpolation In An Open Cnc System

An accurate surface error optimization for five-axis machining of freeform surfaces

STEP-compliant CNC with T-spline Enabled Toolpath Generation Capability

Real-Time Interpolator For Nurbs Based On Cross-Coupled Control Strategy

Technology of CNC direct machining for free form surfaces

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool

The realization of NURBS interpolator for free-form surfaces machining

A Unified Nurbs Interpolator For Five-Axes Machining