Abstract:Parametric interpolation for Non-Uniform Rational B-Spline (NURBS) curve has become more important than ever before in the control of CNC machine tools. An effective NURBS interpolator not only can obtain accurate contour trajectories, but also have smooth dynamics performance. This paper proposes a numerically efficient NURBS interpolation scheme which consists of two stages namely preprocessing and interpolating. In the stage of pre-processing, the parameter interval is split into several blocks at breakpoints and an iterative numerical quadrature method is applied for each block. By means of the iterative quadrature method, the initial parameter intervals of each block are divided into several subintervals according to the arc length approximation error. Meanwhile, the curvature of each knot and the cubic polynomial coefficients of each subinterval are obtained. Then the critical points with large curvature of each block are found from the candidate points and the tolerated speed of each critical point is calculated according to the constraints of chord error and centripetal acceleration. Hence, the feedrate scheduling based on the S-shaped acceleration profile for each block can be preplanned via the approximate arc length of each subinterval, the tolerated speed of each critical point and kinematics characteristics such as acceleration/deceleration and jerk limits of the machine tools. In the stage of interpolating, the parameter of the next interpolation point can be calculated directly using the cumulative arc length and the cubic polynomial coefficients of each subinterval. Finally, a series of numerical simulations and real machining experiments are conducted, and the simulation and experimental results have showed the good performance of the proposed NURBS interpolator both in efficiency and accuracy.

Interpolation for Non-Uniform Rational B-spline Surface Based on STEP-NC

5-axis NC systems with interpolator for NURBS surface based on STEP-NC

The realization of NURBS interpolator for free-form surfaces machining

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

An Algorithm Based on Bicubic B-spline Surface Interpolation for Free Surface Design

Constructing and Processing of NC Instruction for 5-Axis Machining of NURBS Surfaces

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments

NURBS Interpolation Based on Exponential Smoothing Forecasting

An Open CNC for Machining NURBS Surfaces Based on STEP-NC

A Novel Method of Efficient Machining Error Compensation Based on Nurbs Surface Control Points Reconstruction

Study on NURBS curve interpolation and relative algorithms in CNC system

An adaptive real-time NURBS curve interpolation for 4-axis polishing machine tool

Conversion Method Study from Cutter-Location Points to Nonuniform Rational B-spline Toolpath NC File for High-Speed Machining

Development of A Step-Nc Controller for 5-Axis Machining of Nurbs Surfaces

A Real-time NURBS Surface Interpolator for 5-Axis Surface Machining

Development and Implementation of a NURBS Interpolator with Smooth Feedrate Scheduling for CNC Machine Tools

On the Modeling and Analysis of an Improved CNC Interpolation Algorithm

A New Algorithm of Complex Curve Spline Interpolation

Research and Implementation of NURBS Interpolation Algorithm for Adaptive Feed Speed

The Use of NURBS in CNC Curve Interpolation

Advanced Curve and Surface Design in Cad-System Using Step