Abstract:Efficient operational scheduling and control are vital for the operation process of the Integrated Energy System (IES), especially under varying operational conditions. An optimal load distribution and real-time control strategy for IES based on Nonlinear Model Predictive Control has been developed to synergistically improve equipment output performance and reduce operating costs. In the proposed strategy, the IES model that integrates linear parameter-varying models for devices and dynamic models for pipe networks, has been constructed via system identification methodology under varying operational conditions. Thus, a hierarchical operation and control framework is established using the model predictive control strategy, including real-time prediction objective, optimal load distribution objective, and optimization algorithms. Consequently, a case study is performed to investigate the supply-demand balance and economic benefit of the proposed strategy. From the aspect of supply-demand balance, the average energy supply-demand discrepancy by using the proposed strategy (for cooling and heating) is approximately 25 %similar to 33 % that under the steady-state strategy. By means of the proposed strategy, an outstanding equipment output performance will be achieved and supplydemand discrepancy can be dramatically reduced. From the perspective of economic performance, the proposed strategy, which fully considers the nonlinearity of devices, exhibits a 16 % decrease in the operational cost compared to that under the linear dynamic strategy. Through the proposed strategy, efficiency losses are expected to degrade with an excellent economic benefit. Therefore, the suggested strategy is promising and suitable for varying operational condition scenarios.

Orderly Peak Load Shaving Strategy of Thermostatic Controlled Loads Considering Payback Effect

Study On Peak Cutting And Valley Filling Based On Flexible Load

Hierarchical Control of Air-Conditioning Loads for Flexible Demand Response in the Short Term.

Estimation Approach to Aggregated Power and Response Potential of Residential Thermostatically Controlled Loads

An Optimal Load Distribution and Real-Time Control Strategy for Integrated Energy System Based on Nonlinear Model Predictive Control

Power grid peak shaving strategies based on electric vehicles and thermal storage electric boilers

A Strategy for Contingency Management with Aggregated Thermostatically Controlled Loads in China's Electricity Market

Dispatching Potential Evaluation of Thermostatically Controlled Loads Based on Realistic Customer Electricity Data in China

Optimal Sizing and Control of Battery Energy Storage System for Peak Load Shaving

Optimal Scheduling for Power System Peak Load Regulation Considering Short-Time Startup and Shutdown Operations of Thermal Power Unit

Two-Layer Optimization Strategy of Electric Vehicle and Air Conditioning Load Considering the Benefit of Peak-to-Valley Smoothing

Peak Shaving Potential Analysis of Distributed Load Virtual Power Plants

Peak Load Reduction by Thermostatically Controlled Load Dispatch with Thermal Comfort Model

Two-stage Payback Model for the Assessment of Curtailment Services Provided by Air Conditioners

Three-stage day-ahead scheduling strategy for regional thermostatically controlled load aggregators

Peak regulation strategies for ground source heat pump demand response of based on load forecasting: A case study of rural building in China

Scheduling Strategy of Energy Storage Peak-Shaving and Valley-Filling Considering the Improvement Target of Peak-Valley Difference

The Power Simulation of Water-Cooled Central Air-Conditioning System Based on Demand Response

Dynamic modeling and optimal control of cold-storage air-conditioning system for reducing peak load of industrial park

Techno-Economic Analysis of the Peak Shifting Strategy Based on Time-of-Use Tariff for Cold Stores

A Pattern and Method of Orderly Power Utilization Considering Transmission Loss Reduction and Congestion Elimination