Abstract:In view of the unsteady transition between the high-speed and low-speed sensorless control strategies in the full speed range of the Electric Vehicle (EV) permanent magnet synchronous motor (PMSM), the sectional current reduction rate (SCRR) method and the direct switching method (DSM) are proposed to achieve the smooth transitions in the starting and braking process, respectively. To start with, the I/F control method is adopted to realize the startup successfully. And then in order to offer a smooth transition from I/F control method to Sliding Mode Observer (SMO) control mode, the given rotor current is reduced by SCRR, at the same time the synchronous rotating reference frame is close to the real rotor reference frame gradually. When the frames coincide with each other as far as possible, the two control methods complete the switching. In the braking state, the motor would be controlled by DSM, which switches the control method from the SMO to I/F method, to ensure the ride comfort of EV. Finally, the simulation not only verifies the feasibility of SCRR and DSM, but also compares the SCRR method with DSM to the traditional one-section current reduction rate method (OSCRR) without DSM. The results show that comparing with the traditional OSCRR, SCRR can accelerate the starting switching process of the motor and ensure a smooth and no-impact procedure. In addition, chatter in the braking state is eliminated effectively by DSM and the system has good anti-load-disturbance, dynamic and static response capability in various applications.

Speed Synchronism for Contra-Rotating Permanent Magnet Synchronous Motor System and Its Control Strategy

Study on Switching Strategy of PMSM and BLDCM

Sensorless control and start-up strategy of permanent magnet synchronous motor

New vector control of the permanent magnet synchronous motor

A Novel Mixed Speed Regulation Method for Permanent Magnet Synchronous Motor with High Precision

A Method For Permanent Magnet Synchronous Motor Control Based On Single-Loop Svpwm

Research on Low Computational Model Predictive Control Method for FP-PMSM

Sensorless Control for SPMSM With Concentrated Windings Using Multisignal Injection Method

Control of Interior Permanent Magnet Synchronous Motor Drives with Cyclic Fluctuating Load

Model Predictive Control of Counter-Rotating Motors for Underwater Vehicles Considering Unbalanced Load Variation

A Novel Self-tuning Speed Control Scheme for the Permanent Magnet Synchronous Motor

Analysis and control of novel split-winding doubly salient permanent magnet motor for adjustable speed drive

Sensorless Control of Surfaced-Mounted Permanent Magnet Synchronous Motor in a Wide-Speed Range

Control of Interior Permanent Magnet Synchronous Motor Drives over a Wide Speed Range

Analysis and Experimental Verification of Transverse‐dislocated Magnetic‐field Modulated Brushless Contra‐rotating Machine

Cascade Control-Based ICFF-SMC with Adaptive Disturbance Compensator for PMSM

A Novel Full-Speed Sensorless Control Strategy Based on Electric Vehicle PMSM

High-Precision Control For A Surface-Mounted Permanent Magnet Synchronous Motor Based On Inverse System Approach

Position Synchronization Control of Permanent Magnet Synchronous Motors Based on an Improved Cross-Coupling Structure

Development of Optimized Cooperative Control Based on Feedback Linearization and Error Port-Controlled Hamiltonian for Permanent Magnet Synchronous Motor

Composite Control of Speed Sensorless for Bearingless Permanent Magnet Synchronous Motor