Abstract:As a secondary Li-ion battery with high energy density, lithium–sulfur (Li–S) batteries possess high potential development prospects. One of the important ingredients to improve the safety and energy density in Li–S batteries is the solid-state electrolyte. However, the poor ionic conductivity largely limits its application for the commercial market. At present, the gel electrolyte prepared by combining the electrolyte or ionic liquid with the all-solid electrolyte is an effective method to solve the low ion conductivity of the solid electrolyte. We present a cross-linked gel polymer electrolyte with fluoroethylene carbonate (FEC) as a solid electrolyte interface (SEI) film formed for Li–S quasi-solid-state batteries, which can be simply synthesized without initiators. This gel polymer electrolyte with FEC as an additive () possesses high ionic conductivity (0.830 × 10–3 S/cm at 25 °C and 1.577 × 10–3 S/cm at 85 °C) and extremely high Li-ion transference number (tLi+ = 0.674). In addition, the strong ability toward anchoring polysulfides resulting in the high electrochemical performance of Li–S batteries was confirmed in by the diffusion experiment, X-ray photoelectron spectroscopy analysis (XPS), and scanning electron microscopy (SEM) mapping of the S element. Such a high ion conductivity (IC) gel polymer electrolyte enables a competitive specific capacity of 940 mAh/g at 0.2C and supreme cycling performance for 180 cycles at 0.5C, which is far beyond that of conventional poly(ethylene oxide)-based quasi-solid-state Li–S batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c16148.Diagrammatic sketch of preparation of precursors; thickness of the PE separator; H NMR spectra of PEGDE, PEI, and Li–S GPE; XPS spectra of different elements in the PE separator; SEM mapping of the S element on the GPE membrane and the PE separator; and thermal properties of GPE membrane (PDF)This article has not yet been cited by other publications.

A Gel Polymer Electrolyte Based on PVDF-HFP Modified Double Polymer Matrices Via Ultraviolet Polymerization for Lithium-Sulfur Batteries

An ultraviolet polymerized 3D gel polymer electrolyte based on multi-walled carbon nanotubes doped double polymer matrices for lithium-sulfur batteries

Electrochemical Characteristics of Elastic, Non-Polar Polyurethane-Based Polymer Gel Electrolyte for Separator-Less Lithium-Ion Batteries

3D ultraviolet polymerized electrolyte based on PEO modified PVDF-HFP electrospun membrane for high-performance lithium-sulfur batteries

A newly designed composite gel polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for enhanced solid-state lithium-sulfur batteries.

Novel Gel Polymer Electrolyte for High-Performance Lithium–sulfur Batteries

A Poly (vinylidene Fluoride-Hexafluoropropylene) Based Three-Dimensional Network Gel Polymer Electrolyte for Solid-State Lithium-Sulfur Batteries

PVDF-HFP-SN-based gel polymer electrolyte for high-performance lithium-ion batteries

Facile In Situ Chemical Cross-Linking Gel Polymer Electrolyte, which Confines the Shuttle Effect with High Ionic Conductivity and Li-Ion Transference Number for Quasi-Solid-State Lithium–Sulfur Battery

A 3D network-structured gel polymer electrolyte with soluble starch for enhanced quasi-solid-state lithium-sulfur batteries

A functional gel polymer electrolyte based on PVDF-HFP/gelatin toward dendrite-free lithium metal batteries

Preparation and Properties of Gel Polymer Electrolytes with Li1.5Al0.5Ge1.5(PO4)3 and Li6.46La3Zr1.46Ta0.54O12 by UV Curing Process

A gel polymer electrolyte functionalized separator for high-performance lithium-sulfur batteries

Poly (Vinylidene Fluoride-Hexafluoropropylene)–Lithium Titanium Aluminum Phosphate-Based Gel Polymer Electrolytes Synthesized by Immersion Precipitation for High-Performance Lithium Metal Batteries

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

A gel polymer electrolyte with Al2O3 nanofibers skeleton for lithium—sulfur batteries

Preparation Of Poly (Dimethylsiloxane) Graft (Poly(Propylene Oxide)-Block-Poly (Ethylene Oxide) Modified Pvdf Separator And Its Use In Lithium Ion Batteries

Highly multiscale structural Poly(vinylidene fluoridehexafluoropropylene) / poly-m-phenyleneisophthalamide separator with enhanced interface compatibility and uniform lithium-ion flux distribution for dendrite-proof lithium-metal batteries

The recent research progress and prospect of gel polymer electrolytes in lithium-sulfur batteries

Dehydrofluorination Process of Poly(vinylidene difluoride) PVdF-Based Gel Polymer Electrolytes and Its Effect on Lithium-Sulfur Batteries

A new type of LATP doped PVDF-HFP based electrolyte membrane with flame retardancy and long cycle stability for solid state batteries