Abstract:Sodium pyroantimonate which is widely used as the clarifier in the glass industry and as the synergist in anti-flaming industry respectively has a production history of about 30 years in China. At present there is the production capacity of about 20,000 tons per year in China and China is chief producer of sodium pyroantimonate. In this work the production processes adopted by the producers of China, the operation conditions and the product qualities of sodium pyroantimonate prepared by different preparation methods have been summarized, and on the basis of comparing the advantages and disadvantages for each process the most advanced method - the air-oxidation method was introduced in detail. The production processes of sodium pyroantimonate mainly include the method of oxidation by sodium nitrate, the oxidation method of hydrogen peroxide, the potash salt method, the chlorination method and the air-oxidation method etc. The method of oxidation by sodium nitrate in which the crude antimony oxide, sodium carbonate and sodium nitrate are separately used as the raw material, the flux agent and the oxidant, has the advantage of short and simple technological process, but low grade quality of sodium pyroantimonate and bringing about serious environmental pollution are the disadvantages and this method has been substituted by other methods. Sodium pyroantimonate can be directly prepared by the hydrogen peroxide oxidation method with the advantages of simple technological process, high grade quality of the product and little environmental pollution. High grade quality of sodium pyroantimonate can be also synthesized by the potash salt method, in which industrial antimony white, the hydrogen peroxide, potassium hydroxide and sodium hydroxide are applied as the starting material. The disadvantages of these two preparation methods are high production cost and high requirements on the raw materials. The chlorination method with the crude antimony oxide, hydrochloric acid and chlorine as the raw material has the advantages of low production cost and high grade quality of the product. However complex process, high requirement of anti-corrosion for the equipments and producing plenty of waste water limit its application. The air-oxidation method with stibnite/jamesonite concentrate, sodium sulfide, and sodium hydroxide as the raw material and atmosphere as the oxidant is a newly developed method and its advantages are low production cost and the complex raw material can be treated by this method and its disadvantage is that the quality of sodium pyroantimonate is lower than that prepared by the oxidation method of hydrogen peroxide and the potash salt method.

Preparation of Sodium Pyroantimonate from Antimony Trioxide by Pressure Oxidation in NaOH Solution

Optimization of Pressure Oxidation Process to Prepare Sodium Pyroantimonate from Sodium Thioantimonite Solution

Pressure Oxidation Dissolution of Antimony Trioxide in KOH Solution for Preparing Sodium Pyroantimonate

Precipitation of Antimony from the Solution of Sodium Thioantimonite by Air Oxidation in the Presence of Catalytic Agents

TRIAL PRODUCTION OF SODIUM PYROANTIMONATE FROM ANTIMONY CONCENTRATE

A Clean Production Process for Producing NaSb(OH)6 from Antimony-Bearing Dust by Pressurized Oxidation in an NaOH Solution

A Study on Antimony Precipitation from Sodium Thioantimonite by Air Oxidization

Removal of Arsenic and Antimony from Oxidated Solution of Sodium Thioantimonite Production by Air Oxidation

Preparation of nanocrystalline antimony oxide powders by use of γ-ray radiation — oxidization route

Analysis of Sulf-conformation in the Oxidated Solution from the Sodium Pyroantimonite Production by the Air Oxidation

Production and processes of sodium pyroantimonate in China

Direct Preparation of Micro and Nano Antimony Trioxide Using Antimony Concentrate Via Microwave Roasting: Mechanism and Process

Improvements on the Equipments of the Sodium Pyroantimonate Production by Air Oxidation

Synthesis and Characterization of Sb2O3 Nanoparticles by Liquid Phase Method under Acidic Condition

Study on preparation process of sodium sulfantimonate by sodium antimonate

Preparation of Colloidal Sb2o5 from Arsenic-Alkali Residue

Synthesis and Catalytic Performance of Antimony Trioxide Nanoparticles by Ultrasonic-Assisted Solid-Liquid Reaction Ball Milling

Separation of Lead from Crude Antimony by Pyro-Refining Process with NaPO3 Addition

Facile preparation of Sb and oxide-coated Sb nanoparticles via cathodic dispersion of bulk Sb in different media

Preparation, structure, and electrical conductivity of calcium-antimonate-based materials

Lead Removal from Crude Antimony in the Pyrometallurgical Refining Process by Using NaPO3