Abstract:A new process for one-step extraction of antimony in low temperature from stibnite concentrate by reductive sulfur-fixation smelting in sodium molten salt, using iron oxide as sulfur-fixing agent, was presented. The influences of molten salt addition and composition, ferric oxide dosage, smelting temperature and duration on extraction efficiency of antimony were investigated in details, respectively. The optimum conditions were determined as follows: 1.0 time stoichiometric requirement (α) of mixed sodium salt (αsalt = 1.0), WNaCl:Wsalt = 40%, αFe2O3 = 1.0, Wcoke:Wstibnite = 40%, where W represents weight, smelting at 850 °C (1123 K) for 60 min. Under the optimum conditions, the direct recovery rate of antimony can reach 91.48%, and crude antimony with a purity of 96.00% has been achieved. 95.31% of sulfur is fixed in form of FeS in the presence of iron oxide. Meanwhile, precious metals contained in stibnite concentrate are enriched and recovered comprehensively in crude antimony. In comparison to traditional antimony pyrometallurgical process, the smelting temperature of present process is reduced from 1150–1200 °C (1423–1473 K) to 850–900 °C (1123–1173 K). Sulfur obtained in stibnite is fixed in FeS which avoids SO2 emission owing to the sulfur-fixing agent. Sodium salt can be regenerated and recycled in smelting system when the molten slag is operated to filter solid residue. The solid residue is subjected to mineral dressing operation to obtain iron sulfide concentrate which can be sold directly or roasted to regenerate into iron oxide.

Study on preparation process of sodium sulfantimonate by sodium antimonate

Research Status on Preparation Process for Copper Sulfate

A Technical Improvement on the Synthesis of Sodium 1-Amino-4-naphthalene Sulfonate by Solvent Method

Study on crude selenium purifying by a sulfite sodium leaching method

One-Step Extraction of Antimony in Low Temperature from Stibnite Concentrate Using Iron Oxide As Sulfur-Fixing Agent

Optimization of Pressure Oxidation Process to Prepare Sodium Pyroantimonate from Sodium Thioantimonite Solution

STUDY ON THE SYNTHESIS AND PROPERTIES OFSODIUM BIS (2 - ETHYL - 1 - BUTYL)- α - SULFOSUCCINATE

Selective leaching of antimony from high-arsenic antimony-gold concentrate

Basic Theory and Optimization of Gold Containing Antimony Concentrate Leaching by Alkaline Sulfide

Selective removal of antimony from antimonial refractory gold ores

TRIAL PRODUCTION OF SODIUM PYROANTIMONATE FROM ANTIMONY CONCENTRATE

Study on Reduction of Silver with Sodium Sulfite from Silver-containing Liquid Waste

Study on Preparation of Thiomolybdate with New Suifidizing Agent

Study on Preparation of Nanometer ZnO Desulfurizer at Ambient Temperature

Reductive Sulfur‐Fixation Smelting of Stibnite Concentrate in Sodium Molten Salt

Removal of Arsenic and Antimony from Oxidated Solution of Sodium Thioantimonite Production by Air Oxidation

Study on synthesis of sodium 4-aminonaphthalene-1-sulfonate in mixed solvents

Study of the Synthesis of Stannous Methanesulfonate

Analysis of Sulf-conformation in the Oxidated Solution from the Sodium Pyroantimonite Production by the Air Oxidation

Study on Synthesis and Properties of Sodium Bis(2-Methyl-1-pentyl) Sulfosuccinate

Improvements on the Equipments of the Sodium Pyroantimonate Production by Air Oxidation