Abstract:A hybrid optic fiber system is proposed and experimentally demonstrated, which combines the Raman based distributed temperature sensing (DTS) and high-reflective fiber Bragg grating (FBG) sensors for discrete static strain measurement along the same sensing fiber. A distributed feedback laser (DFB) is adopted to generate stimulated emission (STE) light pulses for demodulation of optical time domain reflectometry (OTDR) technology, and an erbium-doped optical fiber amplifier (EDFA) is utilized to increase the power of laser and produce spontaneous emission (SPE) lights. Thus the STE light is employed as pump light for temperature demodulation through Raman-based DTS, as well the SPE lights can be used for discrete strain demodulation through wavelength division multiplexing of FBGs. Since the central wavelengths of FBGs are far away from the lasing wavelength of the laser, the FBG-induced insertion loss can be negligible, therefore the lights reflected by FBGs have little influence on the performance of DTS system. The strain information can be obtained through deducting the temperature induced wavelength shifts of FBGs, since the temperature information can be achieved by DTS system in advance. The experimental results show the maximum measurement error of temperature and strain are 0.48 degrees C and 10.47 mu epsilon, respectively. This hybrid system indicates an effective improved multiplexing scheme based on the Raman-based DTS for simultaneous measurements of distributed temperature and discrete static strain, and a better solution of cross sensitivity problem in FBGs. (C) 2019 Elsevier B.V. All rights reserved.

Online distributed strain measurement of fiber Michelson hydrophones based on DPP-BOTDA with a pulsed-probe wave.

High-Spatial-Resolution Fast BOTDA for Dynamic Strain Measurement Based on Differential Double-Pulse and Second-Order Sideband of Modulation

Distributed Measurement of Dynamic Strain Based on Multi-Slope Assisted Fast BOTDA.

Hybrid Distributed Fiber-Optic Sensing System by Using Rayleigh Backscattering Lightwave As Probe of Stimulated Brillouin Scattering

Distributed Vibration Measurement Based on a Coherent Multi-Slope-assisted BOTDA with a Large Dynamic Range.

High-spatial-resolution Fast Brillouin Optical Fiber Sensor for Distributed Dynamic Measurement Based on Differential Double-Pulse

Simultaneous Measurements of Distributed Temperature and Discrete Strain Based on Hybrid Raman/FBG System

Distributed Dynamic Strain Measurement with a Direct Detection Scheme by Using a Three-Step-phase-shifted Double Pulse in a UWFBG Array

Distributed optical-fiber sensor combining Brillouin optical time domain analyzer with Mach-Zehnder interferometer

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement

Ultra-Long-Distance Hybrid Botda/Phi-Otdr

Towards Large Dynamic Range and Ultrahigh Measurement Resolution in Distributed Fiber Sensing Based on Multicore Fiber.

Fast Distributed Brillouin Optical Fiber Sensing for Dynamic Strain Measurement

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

Distributed optical fiber sensing based on the combination of Brillouin and Rayleigh scattering

Simultaneous temperature and strain sensing using few-mode fiber in a single-ended BOTDA system

Strain-induced Vibration and Temperature Sensing BOTDA System Combined Frequency Sweeping and Slope-Assisted Techniques

Dynamic Strain Measurements Based on High-Speed Single-End-Access Brillouin Optical Correlation Domain Analysis

Ultra-Long-Distance Hybrid BOTDA/Ф-OTDR

A hybrid Φ/B-OTDR for simultaneous vibration and strain measurement

Distributed Temperature And Strain Discrimination With Stimulated Brillouin Scattering And Rayleigh Backscatter In An Optical Fiber