Abstract:To predict brittle fracture in high-strength steels, this study introduces a methodology for analyzing hydrogen-assisted degradation. The proposed approach considers the fully coupled problems of deformation-hydrogen diffusion and cohesive zone modeling. The analysis of hydrogen diffusion assumes that trapped and lattice hydrogen remain in a equilibrium state while accounting for the relationships between the increase in trap sites and plastic strain. The diffusion model simulates hydrogen diffusion in the small scale yielding (SSY) configuration at a crack tip. The simulation results reveal that hydrogen diffusion follows the hydrostatic stress distribution around the crack tip region. Additionally, the plastic strain near this area leads to an increased number of trap sites. Notably, the simulations indicate that lattice hydrogen is the dominant source of embrittlement when a sufficient amount of hydrogen atoms dissolve into the steel, as compared to trapped hydrogen. The hydrogen-assisted degradation evolution is studied by investigating the influence of hydrogen in a cohesive zone modeling (CZM) with a trapezoidal traction separation law (TSL), based on Hydrogen-Enhanced DEcohesion (HEDE) framework. The fully computational framework is utilized to simulate the hydrogen-charged fracture toughness test in a (CT) specimen made of 30CrMo high strength steel. It is demonstrated that the load bearing capacity of the specimen decreases with an increase in the initial hydrogen concentration. Furthermore, the study examines the evolution of the initial crack time with varying initial hydrogen concentrations. The initial hydrogen concentrations are estimated to match the maximum loads observed in the experimental load-displacement curves based on computational framework. The computational CTOD-R curves for hydrogen generally follow the experimental data, the marginally elevated computational CTOD values to underestimate the embrittling in hydrogen-contaminated steel. Overall, the present study proves the capability of this numerical technique to reproduce experimental findings related to hydrogen-assisted fracture.

Sensitivity of the J-Integral Method for Estimating the Hydrogen Embrittlement of Ferritic-Pearlitic Pipe Steel

Hydrogen Embrittlement Evaluation of Micro Alloyed Steels by Means of J-Integral Curve

Hydrogen effect on fracture toughness of pipeline steel welds, with in situ hydrogen charging

Investigation of hydrogen embrittlement behavior in X65 pipeline steel under different hydrogen charging conditions

Methodology of hydrogen embrittlement study of long-term operated natural gas distribution pipeline steels caused by hydrogen transport

Investigation of Hydrogen Embrittlement Susceptibility and Fracture Toughness Drop after in situ Hydrogen Cathodic Charging for an X65 Pipeline Steel

Quantification of Temperature Dependence of Hydrogen Embrittlement in Pipeline Steel

Quantitative Study on Hydrogen Concentration–Hydrogen Embrittlement Sensitivity of X80 Pipeline Steel Based on Hydrogen Permeation Kinetics

Hydrogen effect on a low carbon ferritic-bainitic pipeline steel

EFFCTS OF HYDROGEN ON FRACTURE OF PRE-CRACKING SPECIMENS OF X70 PIPELINE STEEL

Modeling of Hydrogen-Charged Notched Tensile Tests of an X70 Pipeline Steel with a Hydrogen-Informed Gurson Model

Hydrogen embrittlement of 2205 duplex stainless steel in in-situ tensile tests

Numerical analysis of the fully-coupled continuum cohesive modeling on the hydrogen-assisted degradation behavior in high-strength steel

Hydrogen Accumulation and Distribution in Pipeline Steel in Intensified Corrosion Conditions

Synergistic effect of different testing environments on the hydrogen-induced mechanical degradation to establish the role of microstructural features on the failure of X70 pipeline steel

Embrittlement of Pressure Vessel Steels in High Temperature, High Pressure Hydrogen Environment due to absorbed hydrogen in steel

Hydrogen Embrittlement Detection Technology Using Nondestructive Testing for Realizing a Hydrogen Society

Hydrogen Stress Cracking Resistance of Seamless Pipes for Hydrogen Storage and Transport Applications

Evaluating the Effect of Hydrogen on the Tensile Properties of Cold-Finished Mild Steel

Development of a Method for Controlled Hydrogen Fragmentation of Medium-Carbon Steels to Reduce Their Crack Resistance

Effects of Hydrogen and Specimen Thickness on Fracture Toughness of Ferritic Steel Welded Joint