Abstract:Due to its low cost, stiffness, and recyclability, isotactic polypropylene (iPP) is an excellent candidate for packaging applications. However, iPP is notoriously difficult to thermoform due to its low melt strength. The addition of just 10 thin layers of high-molecular-weight, linear low-density polyethylene (LLDPE) into iPP sheets by coextrusion significantly increased extensional viscosity and reduced sag. Both LLDPE and iPP were metallocene-catalyzed with excellent adhesion as measured in our previous work. We performed a series of hot tensile tests and sheet sag measurements to determine the properties of the iPP sheet and the multilayer sheet between 130 and 180 °C. To evaluate the thermoformability of these multilayer sheets, truncated conical cups were positive vacuum formed at different temperatures and heating times, and the crush strength was measured. Cups that released easily from the mold with good shape retention and a crush strength within 80% of the maximum value were used to define a temperature-time thermoformability window. We estimated the maximum stress that occurred during the thermoforming process to be 5 MPa. Layer thicknesses before and after thermoforming were used to estimate an average strain of 0.78. The thin LLDPE layers decreased the yield stress below 5 MPa. This enabled thermoforming at sheet temperatures as low as 150 °C. The immiscible LLDPE interfaces increased extensional viscosity, which decreased sag in the multilayer sheets compared to iPP. This broadened the thermoforming range to temperatures as high as 180 °C and allowed longer heating times. These highly thermoformable, layered sheets may be recycled as iPP since they contain only 8% of LLDPE.

The Development and Application of High Transparent Polypropylene

The mechanical properties and thermal performances of polypropylene with a novel intumescent flame retardant

Research and application of polypropylene: a review

Recent advances and prospect of ethylene terpolymerization

Advances in Modification of Ethylene Propylene Random Copolymer

Progress in analysis of structure and properties of hiPP

Research and Application of Polypropylene Carbonate Composite Materials: A Review

Modified high-density polyethylene films: preparation, composition and their physical properties

β-Crystalline polypropylene and its applications

Crystalline Modifications and Nucleating Agents for Polypropylene

The Study and Application of Interfacial Modification in Plastic Modification

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Developments of transparent polyamides

Characterization of Microstructure of Polypropylene Alloys

Research review on polypropylene microporous membrane

Polyethylene plastic production process

High transparency, degradable and UV-protective poly(lactic acid) composites based on elongational rheology and chain extender assisted melt blending

Improved Polypropylene Thermoformability through Polyethylene Layering

Bio-Polypropylene and Polypropylene-based Biocomposites: Solutions for a Sustainable Future

Versatile Polypropylene Copolymers from a Pilot-Scale Spheripol II Process

On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties