Abstract:Vanadium oxides are a promising class of cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs). However, the intrinsically low electrical conductivity and unstable structure of vanadium materials often lead to fast performance degradation. In this work, we report on potassium-rich preintercalated vanadium oxide (K1.1V3O8) as a high-performance cathode material for ZIBs. The K1.1V3O8 cathode exhibits a high specific capacity of 386 mAh g–1 at 0.1 A g–1 and good long-term cycling stability with a capacity retention of 114.9% (180.7 mAh g–1) after 10 000 cycles at 10 A g–1. The DFT calculations reveal a low Zn diffusion barrier and low Bader charge of K in K1.1V3O8, which are responsible for its good rate capability and high storage performance. The demonstration approach of maximizing ZIB performance proves to be an effective way to design promising cathode materials for ZIBs by regulating the appropriate preintercalation metal ions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00625?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00625</a>.Kinetics analysis of the energy storage reaction; DFT computational methods; The electrochemical reactions of KVO cathode; Crystal structures of active materials (Figure S1); The FTIR spectrum of LiVO, NaVO, and KVO (Figure S2); XRD, SEM, HRTEM and STEM of LiVO (Figure S3); XRD, SEM, HRTEM and STEM of NaVO (Figure S4); XPS of LiVO and NaVO (Figure S5); CV curves and GCD of LiVO and NaVO (Figure S6); CV curves and GCD of CNT (Figure S7); The Nyquist plots of LiVO, NaVO and KVO based electrodes before and after cycling in two electrode configuration (Figure S8–S9); The cycling performance of LiVO, NaVO and KVO electrodes (Figure S10); The contribution ratio of capacitive process calculated from CV curves of KVO (Figure S11); The Nyquist plots of LiVO, NaVO and KVO in the three-electrode configuration (Figure S12); The electrochemical performance of KV3O8 electrode (Figure S13); TEM image, HRTEM image with SAED pattern, and STEM elemental mapping of KVO discharged to 0.2 V (Figure S14); The intercalation process of Zn2+ into the V–O interlayer spacing of KVO (Figure S15); The intercalation process of Zn2+ into the V–O interlayer spacing of LiVO and NaVO (Figure S16); The intercalation process of H+ into the V–O interlayer spacing of LiVO, NaVO and KVO (Figure S17) (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00625/suppl_file/nz1c00625_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Novel high-voltage cathode for aqueous zinc ion batteries: Porous K0.5VOPO4·1.5H2O with reversible solid-solution intercalation and conversion storage mechanism

A durable VO<sub>2</sub>(M)/Zn battery with ultrahigh rate capability enabled by pseudocapacitive proton insertion

Bi-intercalated Vanadium Pentoxide Synthesized Via Hydrogen Peroxide-Induced Phase Transition for Highly Stable Cathode in Aqueous Zinc Ion Batteries

A durable VO2(M)/Zn battery with ultrahigh rate capability enabled by pseudocapacitive proton insertion

Polyvinylpyrrolidone‐Intercalated Mn0.07VOx toward High Rate and Long‐Life Aqueous Zinc‐Ion Batteries

Low-strain layered Zn0.56VOPO4∙2H2O as a high-voltage and long-lifespan cathode material for Zn-ion batteries

Bi-intercalated vanadium pentoxide synthesized by hydrogen peroxide-induced phase transition for highly stable cathode of aqueous zinc ion batteries

New Insight on K2 Zn2 V10 O28 as an Advanced Cathode for Rechargeable Aqueous Zinc-Ion Batteries.

Porous flower-like Zn0.18V2O5·0.84 H2O as cathode for ultralong lifespan aqueous zinc-ion batteries

MIL-100(V) derived porous vanadium oxide/carbon microspheres with oxygen defects and intercalated water molecules as high-performance cathode for aqueous zinc ion battery

Rich Alkali Ions Preintercalated Vanadium Oxides for Durable and Fast Zinc-Ion Storage

Ultra-high mass-loading V5+-VO2@PPy cathode for aqueous zinc-ion battery

High-loading and high-performance zinc ion batteries enabled by electrochemical conversion of vanadium oxide cathodes

High-performance zinc-ion batteries enabled by electrochemically induced transformation of vanadium oxide cathodes

Heterojunction tunnelled vanadium-based cathode materials for high-performance aqueous zinc ion batteries

Two-Dimensional Conductive Polymer/V2O5 Composite with Rapid Zinc-Ion Storage Kinetics for High-Power Aqueous Zinc-Ion Battery

Potassium Vanadates with Stable Structure and Fast Ion Diffusion Channel As Cathode for Rechargeable Aqueous Zinc-Ion Batteries

Dual-vapour-thermal engineering evoking bound water pathways of vanadium oxide for high-rate and durable zinc-ion storage

Pre-potassiated hydrated vanadium oxide as cathode for quasi-solid-state zinc-ion battery

Water molecules and oxygen-vacancy modulation of vanadium pentoxide with fast kinetics toward ultrahigh power density and durable flexible all-solid-state zinc ion battery

Hydrated Layered Vanadium Oxide as a Highly Reversible Cathode for Rechargeable Aqueous Zinc Batteries