Abstract:Measurement and Control, Ahead of Print. In this study, a biomechanical model mimicking the human hand-arm system under heavy disk excitation is developed to define the stability threshold between the preload vibration and the stress of the human hand-arm system. The fully electromechanical system, consisting of a DC motor, a transmission system, and three discrete masses representing the upper arm, forearm, and hand lifting a heavy disk, is connected by shock absorbers and various springs. The challenge of mimicking the angular activity of the elbow joint in torsion and flexion was also included to assess its contribution to system stability and to study the absorption of mechanical energy in the human hand-arm system. Finally, the movements of the model were described by a differential matrix equation, and its analysis facilitates the understanding of the threshold of the chaotic behaviors observed in an oscillating arms system. Specifically, it explores how the motion of a DC motor can be regulated using a single controller parameter within the context of a multi-degree-of-freedom human hand-arm system. The study uses numerical integrations to analyze system behaviors, with an emphasis on the use of frequency spectra, Poincaré maps, and bifurcation diagrams for visualization and interpretation. The results indicate that the system exhibits chaotic behavior when subjected to certain conditions, particularly when the mass load exceeds 35 kg. Imposing motion on the mass block further intensifies the chaos, leading to manifestations such as strong oscillations and frequency-synchronization effects. These characteristics, exhibited by the idealized model, which imitates the human body through a mechanical model and computation of the motions of the body, play a vital role in various fields of ergonomics and sports biomechanics. Understanding the dynamic behaviors of such systems, especially in response to varying conditions, has significant implications for engineering applications.

Modeling and control of impact in mechanical systems: theory and experimental results

Response Evaluation and Optimal Control for Stochastically Excited Vibro-Impact System with Hertzdamp Contact

Random vibration with inelastic impact: Equivalent nonlinearization technique

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Modeling of Underconstrained Systems with the Force Method

Dynamic Modelling Using Screw Theory And Nonlinear Sliding Mode Control Of Serial Robot

Modeling and control of dynamical biomechanical arm systems with elastic joints sensitive to the effect of an external load

Modeling and Control in Solid Mechanics

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Discussion of the Gear-Gupta-Leimkuhler method for impacting mechanical systems

Impact Model Resolution on Painlevé's Paradox

Impact-Aware Robotic Manipulation: Quantifying the Sim-To-Real Gap for Velocity Jumps

Modelling and Control of Nonholonomic Mechanical Systems

Refined Post-Impact Velocity Prediction for Torque-Controlled Flexible-Joint Robots

Impact-Invariant Control: Maximizing Control Authority During Impacts

Predicting the Post-Impact Velocity of a Robotic Arm via Rigid Multibody Models: an Experimental Study

On Inverse Inertia Matrix and Contact-Force Model for Robotic Manipulators at Normal Impacts

Robot Control for Simultaneous Impact Tasks through Time-Invariant Reference Spreading

An Experimental Study of Nonlinear Stiffness, Hysteresis, and Friction Effects in Robot Joints with Harmonic Drives and Torque Sensors

An optimization approach to establish dynamical equivalence for soft and rigid impact models

Kinematic Approach in the Impact Problem of Rigid Bodies