Abstract:. In this paper, we propose a model of biological motor control for generation of goal-directed multi-joint arm movements, and study the formation of muscle control inputs and invariant kinematic features of movements. The model has a hierarchical structure that can determine the control inputs for a set of redundant muscles without any inverse computation. Calculation of motor commands is divided into two stages, each of which performs a transformation of motor commands from one coordinate system to another. At the first level, a central controller in the brain accepts instructions from higher centers, which represent the motor goal in the Cartesian space. The controller computes joint equilibrium trajectories and excitation signals according to a minimum effort criterion. At the second level, a neural network in the spinal cord translates the excitation signals and equilibrium trajectories into control commands to three pairs of antagonist muscles which are redundant for a two-joint arm. No inverse computation is required in the determination of individual muscle commands. The minimum effort controller can produce arm movements whose dynamic and kinematic features are similar to those of voluntary arm movements. For fast movements, the hand approaches a target position along a near-straight path with a smooth bell-shaped velocity. The equilibrium trajectories in X and Y show an ‘N’ shape, but the end-point equilibrium path zigzags around the hand path. Joint movements are not always smooth. Joint reversal is found in movements in some directions. The excitation signals have a triphasic (or biphasic) pulse pattern, which leads to stereotyped triphasic (or biphasic) bursts in muscle control inputs, and a dynamically modulated joint stiffness. There is a fixed sequence of muscle activation from proximal muscles to distal muscles. The order is preserved in all movements. For slow movements, it is shown that a constant joint stiffness is necessary to produce a smooth movement with a bell-shaped velocity. Scaled movements can be reproduced by varying the constraints on the maximal level of excitation signals according to the speed of movement. When the inertial parameters of the arm are altered, movement trajectories can be kept invariant by adjusting the pulse height values, showing the ability to adapt to load changes. These results agree with a wide range of experimental observations on human voluntary movements.

Modeling and control of dynamical biomechanical arm systems with elastic joints sensitive to the effect of an external load

Sensitivity Analysis of Dynamics System in the Upper Limb Movement Control

Modeling and Simulation Study of Electromechanically System of the Human Extremity Exoskeleton

A Soft Wearable Elbow Skeleton for Safe Motion Assistance by Variable Stiffness

An Experimental Study of Nonlinear Stiffness, Hysteresis, and Friction Effects in Robot Joints with Harmonic Drives and Torque Sensors

Analysis of an Optimal Control Model of Multi-Joint Arm Movements

Complex Stiffness Model of Physical Human-Robot Interaction: Implications for Control of Performance Augmentation Exoskeletons

Underactuated Hand Dynamic Modeling, Its Real-Time Simulation, And Control

Stability Analysis for Postural Control in a Two-Joint Limb System

Analysis of movement of an elbow joint with a wearable robotic exoskeleton Using OpenSim software

Event-Triggered Sliding-Mode Control for a Discrete-Time Muscle-Driven Musculoskeletal System

A realistic human elbow model for dynamic simulation

An Integrated Virtual Hand Platform for Evaluation of Model-Based Control of Hand Prosthesis.

A Complex Stiffness Human Impedance Model with Customizable Exoskeleton Control

Dynamic and Stability of Harmonic Driving Flexible Cartesian Robotic Arm with Bolted Joints Based on the Sensitivity and Multiple Scales Method

2P1-I04 Stability Analysis of Cyclic Arm Movements under Feedforward Control of the Musculo-skeletal System(Mobiligence)

Modeling and Simulation of a Mechanical Arm with Joint Clearance

Model-Based Sensorimotor Integration for Multi-Joint Control: Development of a Virtual Arm Model

Analysis and Simulation of Mechanical Arm Dynamics Model Based on Simulink

Inverse Kinematics Modeling And Motion Control Of Pam Bionic Elbow Joint

Center of Gravity-based Approach for Modeling Dynamics of Multisection Continuum Arms