Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Antibiofouling Polysulfone Ultrafiltration Membranes Via Surface Grafting Of Capsaicin Derivatives

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Antifouling and Antibacterial Bioactive Metabolites of Marine Fungus (terrein)/polyamide Thin-Film Composite Reverse Osmosis Membranes for Desalination Applications

Preparation and Performance of Quaternary Ammonium Salt-Containing Methacrylate Copolymer-Based Ultrafiltration Membranes

Fouling Resistance of 3-[[3-(trimethoxysilane)-propyl] Amino] Propane-1-sulfonic Acid Zwitterion Modified Poly (vinylidene Fluoride) Membranes

Enhancing biofouling resistance in microfiltration membranes through capsaicin-derivative functionalization

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Surface Modification of Polypropylene Microfiltration Membrane by Grafting Poly(sulfobetaine Methacrylate) and Poly(ethylene Glycol): Oxidative Stability and Antifouling Capability

Surface Hydrophilization of Microporous Polypropylene Membrane by Grafting Zwitterionic Polymer for Anti-Biofouling

Dependable Performance of Thin Film Composite Nanofiltration Membrane Tailored by Capsaicin-Derived Self-Polymer

Improvement of Antifouling and Antibacterial Properties of Poly(ether Sulfone) UF Membrane by Blending with a Multifunctional Comb Copolymer

Membrane Surface with Antibacterial Property by Grafting Polycation

Stimuli-Responsive Lysozyme Nanocapsule Engineered Microfiltration Membranes with a Dual-Function of Anti-Adhesion and Antibacteria for Biofouling Mitigation

Anti-fouling membranes by manipulating surface wettability and their anti-fouling mechanism

Enhancing the antifouling property of polymeric membrane via surface charge regulation

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

A High Flux Ultrafiltration Membrane with Multi-hydrophilic Particles Winding and Controlled Self-assembly of Micellar Particles

Surface engineering for anti-wetting and antibacterial membrane for enhanced and fouling resistant membrane distillation performance

Surface Modification Of Membranes For Antibiofouling