Arbitrarily Reconfigurable and Thermadapt Reversible Two-Way Shape Memory Poly(thiourethane) Accomplished by Multiple Dynamic Covalent Bonds
Junjie Zhou,Huimin Yue,Miaoming Huang,Chaobo Hao,Suqin He,Hao Liu,Wentao Liu,Chengshen Zhu,Xia Dong,Dujin Wang
DOI: https://doi.org/10.1021/acsami.1c13057
2021-09-07
Abstract:The fabrication of a single polymer network that exhibits a good reversible two-way shape memory effect (2W-SME), can be formed into arbitrarily complex three-dimensional (3D) shapes, and is recyclable remains a challenge. Herein, we design and fabricate poly(thiourethane) (PTU) networks with an excellent thermadapt reversible 2W-SME, arbitrary reconfigurability, and good recyclability via the synergistic effects of multiple dynamic covalent bonds (i.e., ester, urethane, and thiourethane bonds). The PTU samples with good mechanical performance simultaneously demonstrate a maximum tensile stress of 29.7 ± 1.1 MPa and a high strain of 474.8 ± 7.5%. In addition, the fraction of reversible strain of the PTU with 20 wt % hard segment reaches 22.4% during the reversible 2W-SME, where the fraction of reversible strain is enhanced by self-nucleated crystallization of the PTU. A sample with arbitrarily complex permanent 3D shapes can be realized via the solid-state plasticity, and that sample also exhibits excellent reversible 2W-SME. A smart light-responsive actuator with a double control switch is fabricated using a reversible two-way shape memory PTU/MXene film. In addition, the PTU networks are de-cross-linked by alcohol solvolysis, enabling the recovery of monomers and the realization of recyclability. Therefore, the present study involving the design and fabrication of a PTU network for potential applications in intelligent actuators and multifunctional shape-shifting devices provides a new strategy for the development of thermadapt reversible two-way shape memory polymers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13057.Composition of PTU networks; FTIR curves and TGA curves of PTU samples; residual content of PTU samples after being immersed in water; swelling ratios and residual content of PTU samples in different solvents; crystallinity of the PTU samples obtained from XRD data; calculation formula of cross-linking density; schematic diagram of the temperature control of self-nucleated crystallization; DSC cooling curves of PTU-20% after treating at different self-nucleation temperatures (Ts); reversible two-way shape memory parameters of PTU-20% samples; stress–strain curves of PTU-20% film; performance of PTU samples before and after reprocessing; TGA curves of the samples; temperature changes as a function of time while the NIR light is turned on and off (PDF)Movie showing that the film can reversibly switch between square and cylindrical shapes during the heating–cooling cycles (Movie S1) (MP4)Movie showing that the wings of the bird can reversibly open and close upon variation of the temperature, similar to the wing motion of a bird flying (Movie S2) (MP4)A remote-controllable actuator (Movie S3) (MP4)Movie showing sunlight instead of NIR light used to remotely control the actuator (Movie S4) (MP4)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology