Abstract:Reduced Activation Ferritic/Martensitic (RAFM) steel is selected as structural material for the water cooled ceramic breeder (WCCB) blanket for China Fusion Engineering Test Reactor (CFETR). Due to the magnetization of RAFM steel, the toroidal field (TF) ripple is generated by the WCCB blanket. The TF ripple induces significant losses of high-energy particles, and then causes issues of heat load on plasma-facing components (PFCs) and energy balance of plasma. Hence, TF ripple generated by WCCB blanket is calculated, and several effective optimization methods are explored in this paper. The simulation results indicate that TF ripple in plasma target separatrix is greater than design limits (delta(TF) < 0.5%) in present design. Four methods are employed to study and evaluate the effect of decreasing TF ripple including installing ferromagnetic inserts, using correction coils, changing the related parameter of diagnostic system and moving the WCCB blanket, respectively. Based on the analysis results, it is found that these four methods can reduce TF ripple to some extend through different optimizing methods. The location of five TF ripple peaks of a 22.5 degrees sector are at 0 degrees, +/- 3.07 degrees and +/- 7.67 degrees respectively. The TF ripple can only reduce from 0.25% to 0.21% at +/- 3.07 degrees plane using optimization method of installing ferromagnetic inserts. The rest of the location has almost little impact. The TF ripple can only reduce from 0.31% to 0.20% at 0 degrees plane using correction coils, but the peak value will increase to 0.33% at +/- 3.07 degrees plane. Moving diagnostic system 40 mm outward in radial direction will effectively decrease the TF ripple from 3.54% to 0.37% at -3.07 degrees plane. Moving WCCB blankets 20 mm outward in radial direction makes the maximum TF ripple from 0.56% to 0.09%. Discussions are made about the effect of the optimization methods for reducing TF ripple.

Evaluation on the Method of Reducing CFETR TF Ripple Generated by WCCB Blanket

Study on Ripple Effect of Ferromagnetic WCCB Blanket Modules in CFETR

An Analysis of Ripple and Error Fields Induced by a Blanket in the CFETR

Ripple effect and impact of test blanket module by using RAFM steels on the plasma of ITER

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

An Approach to Increase the Fusion Tritium Breeding Ratio Using Temperature Field Balance Based on Water-Cooled Ceramic Blanket

Neutronics Comparison Analysis of the Water Cooled Ceramics Breeding Blanket for CFETR

Design and analysis of the equatorial inboard WCCB blanket module for CFETR

The effect of blanket system and port plugs on the harmonic components of error field and optimizing approach investigation

Thermo-mechanical Assessment of the Optimized CFETR Water Cooled Ceramic Breeder Blanket

Design of the Water-Cooled Ceramic Breeder Blanket for CFETR

CFD Analysis of Flow Distributions and Pressure Drops in the Whole CFETR WCCB Blanket Module with Different Turbulence Models

Numerical Studies on the Heat Transfer and Friction Characteristics of the First Wall Inserted with the Screw Blade for Water Cooled Ceramic Breeder Blanket of Cfetr

Analysis of nuclear response in CFETR toroidal field coils with density reduction VR technique

Tritium Transport Analysis for CFETR WCSB Blanket

Modeling and Multi-Pipe Manifolds Optimization of the WCCB Blanket Sector for CFETR

Neutronics and Thermo-Hydraulic Analysis of Water-Cooled Blanket Based on Pwr and Scwr Water Conditions for Cfetr

Preliminary analysis of time dependent tritium breeding characteristics of a water cooled ceramic breeder blanket for CFETR

Updated Neutronics Analyses of a Water Cooled Ceramic Breeder Blanket for the CFETR

Evaluation and Optimization of Tritium Breeding, Shielding and Nuclear Heating Performances of the Helium Cooled Solid Breeder Blanket for CFETR

Updated Design of Water-Cooled Breeder Blanket for CFETR