Abstract:Bulk polytetrafluoroethylene (PTFE) foam is a great potential oil–water separation material, owing to the high hydrophobicity and lipophilicity property. However, the technique of fabricating PTFE foam with low cost, controllable porosity and high mechanical strength remains an urgent requirement due to its high chemical inertness induced limitation. A kind of bulk PTFE foam material is prepared by cold pressing co-sintering method, employing sodium chloride (NaCl) as pore forming agent. SEM measurements reveal that the size and distribution of pore structure are mainly determined by the particle size and content of NaCl, because the migration and diffusion behaviors of PTFE particles suffer from more inhibition induced by increased NaCl particles during sintering. The PTFE foam with uniformly distributed pore structures can be obtained from composite mixed with 70 wt% NaCl and 30 wt% PTFE, with a low thermal conductivity as low as 0.069 W/(m K). With the decrease of PTFE content in raw composite, the density and mechanical properties of PTFE foam gradually declines. However, the tensile strength remains as low as 0.2 MPa, with an elongation rate of 21%, which guarantees the required mechanical strength avoiding being broken when use as a bulk oil absorption material. Remarkably, the PTFE foam shows a strong hydrophobicity, with a mean water contact angle of 137°, and with a mean surface roughness of 4.41 μm. It exhibits separation efficiency larger than 99% in 30 cycles, with separation flux larger than 4000 L/m 2 /h within 15 cycles, indicating excellent recyclability and stability. The PTFE foam sample also shows desirable continuous separation performance for oil/water mixture. The proposed bulk PTFE foam with low manufacturing cost and stable chemical and mechanical properties will provide data and theoretical support for the material applied in oil/water separation and thermal-protective coating.

Tension Gradient Self-Assembly to Facilely Fabricate Polytetrafluoroethylene Coatings for Oil–water Separation

Robust Superhydrophobic Polytetrafluoroethylene Nanofibrous Coating Fabricated by Self-Assembly and Its Application for Oil/Water Separation

Fabrication of High-Flux PTFE Hollow Fiber Membranes Through Nonionic Surfactant Infiltration Coupled with Mussel-Inspired Chemistry Coating

Ultra-robust Superhydrophobic/superoleophilic Stainless Mesh Coated by PTFE/SiO 2 for Oil/water Separation

Femtosecond Laser Ablated Durable Superhydrophobic PTFE Films with Micro-Through-holes for Oil/water Separation: Separating Oil from Water and Corrosive Solutions

Fabrication of Superhydrophobic Electrospun Polyimide Nanofibers Modified with Polydopamine and Polytetrafluoroethylene Nanoparticles for Oil–water Separation

Preparation of foam material via co-sintering of NaCl and PTFE for oil/water separation

Femtosecond Laser Ablated Durable Superhydrophobic PTFE Sheet for Oil/water Separation

Interfacial tension gradient driven self-assembly of binary colloidal particles for fabrication of superhydrophobic porous films

Fabrication and Emulsified Oil/Water Separation Properties of Superwettable Stainless Steel Fiber Felts

Construction of Polytetrafluoroethylene Nanofiber Membrane Via Continuous Electrospinning/Electrospraying Strategy for Oil-Water Separation and Demulsification

Fabrication of Underwater Superoleophobic Metallic Fiber Felts for Oil-Water Separation

Facile, green and scalable preparation of low-cost PET-PVDF felts for oil absorption and oil/water separation

Gelatin-tannic Acid Coating for High Flux Oil-Water Separation

A Simple and Efficient Approach for Pore Structure Optimization and Hydrophilic Modification of PTFE Nanofiber Membrane

Robust Fabrication of Fluorine-Free Superhydrophobic Steel Mesh for Efficient Oil/water Separation

Preparation of Underwater Superoleophobic Membranes Via TiO2 Electrostatic Self-Assembly for Separation of Stratified Oil/water Mixtures and Emulsions

Facile Fabrication of SWCNT Film-Based Superhydrophobic Cotton Fabrics for Oil/water Separation and Self-Cleaning

A simple surface modification method to prepare versatile PVDF electrospun nanofibrous felts for separation, sterilization and degradation

Robust superwetting polytetrafluoroethylene membranes with interlayer-bridged inorganic nanocoating for efficient oil/water separation

Fabrication and Oil/Water Separation Performance of a Chemical Resistant Superhydrophobic Mesh