Abstract:Polymer-based thermal conductive composites (PTCs) with both excellent thermal and mechanical properties are highly desirable in the thermal management of modern microelectronic industry. However, the enhancement efficiency for fillers loaded polymer composite is actually lower than the theoretically predicted value. The significant reasons could be due to the restriction of interfacial thermal resistance at filler-polymer matrix interfaces as well as the thermal conductive orientation dependence of anisotropic fillers. In the present study, solid-state shear milling (S3M) strategy and FDM 3D-printing aligning technology were combined to synergistically improve thermal conductivity of linear low-density polyethylene (LLDPE)/graphene nanoplatelet (GNPs) nanocomposites. The fabricated FDM 3D-printed parts exhibit a significantly enhanced through-plane thermal conductivity up to 3.43 W m−1 K−1 along printing direction compared to that of neat LLDPE (0.40 W m−1 K−1) and also that of traditionally melt-compounded LLDPE/GNPs composites (1.98 W m−1 K−1) at the same GNPs loading of 15.0 vol%. The enhanced thermal conductivity is attributed to the long-range aligned bridge-connected network structure of GNPs constructed in the PE matrix along printing direction due to the shear-inducing effect of FDM 3D-printing. Simultaneously, the S3M technology we adopted also reduces the interfacial thermal resistance and thus increases the thermal conductivity of the obtained nanocomposite, which was further demonstrated by the way of theoretical effective medium approximation (EMA) models we applied. The achieved high thermal conductivity and mechanical properties of the FDM 3D-printed LLDPE/GNPs thermal conductive parts suggest promising applications in the heat diffusion of some advanced electronic devices.

Facile Fabrication of Poly (tetrafluoroethylene)/graphene Nanocomposite Via Electrostatic Self-Assembly Approach

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Preparation of Functionalized Graphene by Simultaneous Reduction and Surface Modification and Its Polymethyl Methacrylate Composites Through Latex Technology and Melt Blending

Functionalized Graphene/thermoplastic Polyester Elastomer Nanocomposites by Reactive Extrusion‐based Masterbatch: Preparation and Properties Reinforcement

Two-step approach based on fused filament fabrication for high performance graphene/ thermoplastic polyurethane composite with segregated structure

Preparation and utility of a self-lubricating & anti-wear graphene oxide/nano-polytetrafluoroethylene hybrid

Facile green path to interconnected nano-graphite networks to overtake graphene as conductive fillers

Tribological Behaviour of POM Reinforced by Graphene and PTFE

Straightforward Strategy Toward In Situ Water-Phase Exfoliation and Improved Interfacial Adhesion to Fabricate High-Performance Polypropylene/Graphene Nanocomposites

Green Approach Toward In Situ Exfoliation and Enhanced Compatibility To Obtain Highly Conductive Polypropylene/Graphene Composites

Facile fabrication of highly conductive polystyrene/nanocarbon composites with robust interconnected network via electrostatic attraction strategy

A Comparative Analysis of Chemical, Plasma and In Situ Modification of Graphene Nanoplateletes for Improved Performance of Fused Filament Fabricated Thermoplastic Polyurethane Composites Parts

Highly Conductive 3d Segregated Graphene Architecture In Polypropylene Composite With Efficient Emi Shielding

Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods

An Infiltration Method to Synthesize Thermoplastic Polyurethane Composites Based on Size-Controlled Graphene Foams

Mechanochemical functionality of graphene additives in ultralow wear polytetrafluoroethylene composites

Facile Fabrication of Multifunctional Polymer Composites Based on Three-Dimensional Interconnected Networks of Graphene and Carbon Nanotubes

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

One-pot Preparation of Unsaturated Polyester Nanocomposites Containing Functionalized Graphene Sheets Via a Novel Solvent-Exchange Method

Fabrication of Multilayered Polymer Composite Fibers for Enhanced Functionalities

High erosion resistance thermoplastic polyurethanes composites fabricated via intercalation reinforced interfacial interaction