Abstract:With the advantages of high specific energy and high theoretical capacity, lithium‐sulfur batteries are gaining attention in the field of energy storage. However, there are still many difficulties in the practical application. Such as poor electrical conductivity of sulfur, large volume expansion of sulfur, shuttle effect of polysulfide, resulting in rapid capacity decay and poor cycling stability. To solve these problems, in this paper, nitrogen-doped carbon nanotube and layer less montmorillonite composites (NMMT/CNT/S) were prepared by a simple hydrothermal method and used as sulfur carriers for lithium‐sulfur batteries. Due to the high conductivity of carbon nanotubes, the high specific surface area and large number of adsorption sites in montmorillonite, and the ability of nitrogen to increase electrochemical reactivity, the obtained NMMT/CNT/S has excellent electrochemical performance: Initial discharge capacity up to 1122 mAh/g at a current density of 0.5C, initial specific capacity of 1017 mAh/g at a current density of 1C, capacity remaining after 100 cycles 815 mAh/g, the capacity retention rate is 80.1 %. The prepared NMMT/CNT/S cathode material has good magnification performance, at current densities of 0.2, 0.5, 1, 2 and 4C, the average specific capacity was 1085.9, 902.2, 820.4, 681.2 and 526.4 mAh/g, respectively. The initial specific capacity of NMMT/CNT/S at a current density of 2C is 698 mAh/g, capacity remaining 542 mAh/g after 500 cycles of stabilization, with a capacity retention rate of 77.7 %. These results show that the prepared NMMT/CNT/S is a breakthrough development in the application of lithium‐sulfur batteries.

Optimized Sulfur-Loading in Nitrogen-Doped Porous Carbon for High-Capacity Cathode of Lithium–sulfur Batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery

Nitrogen Doped Carbon Nanosheets Encapsulated in Situ Generated Sulfur Enable High Capacity and Superior Rate Cathode for Li-S Batteries

Nitrogen-doped hollow carbon boosting the anchoring of sulfur capacity for high-loading lithium–sulfur batteries

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen-Doped Carbon Enables High-Performance Lithium-Sulfur Battery Cathodes

Encapsulating Sulfur into a Gel-Derived Nitrogen-Doped Mesoporous and Microporous Carbon Sponge for High-Performance Lithium-Sulfur Batteries

Promising Au&CNTs@N-Doped Hierarchical Carbon Composite for High-Performance Lithium–Sulfur Batteries

High-Entropy Metal Nitride Embedded in Concave Porous Carbon Enabling Polysulfide Conversion in Lithium-Sulfur Batteries

Nitrogen-doped microporous carbon with narrow pore size distribution as sulfur host to encapsulate small sulfur molecules for highly stable lithium-sulfur batteries

Strong Lithium Polysulfide Chemisorption on Electroactive Sites of Nitrogen‐Doped Carbon Composites for High‐Performance Lithium–Sulfur Battery Cathodes

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Enhanced Adsorption of Polysulfides on Carbon Nanotubes/Boron Nitride Fibers for High-Performance Lithium-Sulfur Batteries

Nitrogen-doped nanotubes and few-layer montmorillonite composites as an effective polysulfides adsorbent for lithium–sulfur batteries

Constructing Monolithic Sulfur Cathodes with Multifunctional N,P Dual-Doped Carbon Nanocages to Achieve High-Areal-capacity Lithium-Sulfur Batteries

Facile preparation of nitrogen-doped hierarchical porous carbon as a sulfur cathode host for high performance lithium-sulfur batteries

High Sulfur Loading Composite Wrapped By 3d Nitrogen-Doped Graphene As A Cathode Material For Lithium-Sulfur Batteries

A Nitrogen-Rich Carbon Welded Multi-Dimensional Architecture for High Mass Loading Sulfur Cathode

Engineering Oversaturated Fe-N5 Multifunctional Catalytic Sites for Durable Lithium-Sulfur Batteries

Facile synthesis of high-content nitrogen-doped hierarchical porous carbon spheres for high-capacity lithium-sulfur batteries