Abstract:Microstructure evolution, the formation of B2 (ordered BCC) phase and its relation to the nanomechanical properties of the rapidly solidified Ti68Al32, Ti63Al32Nb5 and Ti58Al32Nb10 alloys were investigated by the drop tube technique. For the Ti68Al32 alloy droplets, the solidified microstructures are composed of alpha(2)-Ti3Al phase, when the droplet diameters (D) are ranging from 226 to 1100 mu m. With the decrease of droplet diameters, the microstructural characteristics of alpha(2) phase transform from coarse dendrites to the fully equiaxed grains. Notably, at D < 226 mu m, the formation of alpha(2) phase is suppressed, resulting in the retention of metastable alpha-Ti phase. For the Ti68-xAl32Nbx (x = 5, 10) alloys, the increasing of Nb contents promotes the formation of B2 phase and diminishes the size of the alpha(2) grains. Upon further decreasing the droplet diameter, the microstructure evolves from dendrite dendrites to equiaxed dendrites, and the B2 phase precipitates from the core of alpha(2) dendrites to alpha(2) grain boundaries, which ascribes to Nb-segregation from the dendrite core area to the grain boundary via L ->beta and beta ->alpha, respectively. Nanoindentation test reveals that the hardness of alpha(2) phase first increases and then decreases with the decrease of droplet diameters, which corresponds to the microstructure morphology, phase constitution, grain refinement of the alloys. Meanwhile, the additions of Nb exhibit enhanced properties of alpha(2) phase compared with those with low or without Nb additions, which can effectively modulate the hardness of these alloys. (C) 2020 Elsevier B.V. All rights reserved.

Microstructure and Microhardness of Directionally Solidified NiAl–W Eutectic Alloy

Surface Porous Structure and Microhardness of Intermetallic NiAl Compound

Directional Solidification Microstructure Control Of Nial-1.5at%W Eutectic Alloy And Morphology Of W Meso-Nanowires

Directionally Solidified NiCoCrFeAlW Eutectic High-Entropy Alloy: Microstructure and Mechanical Properties

Phase Selection and Microhardness of Directionally Solidified AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Directional Solidification and Characterization of NiAl–9Mo Eutectic Alloy

Effect of Growth Rate on the Microstructural Transition and Microhardness of Directionally Solidified Ni–11.8 Wt% Si Hypereutectic Alloy

Microstructure Evolution of Directionally Solidified Al-12%Ni Hypereutectic Alloy

Microstructure Evolution of Directionally Solidified NiAl–28Cr–6Mo Eutectic Alloy under Different Withdrawal Rates

Morphology of W Fibers and Kinetic Undercooling in Directionally Solidified NiAl–W Eutectic Alloy

Effect of Growth Rate on Microstructures and Microhardness in Directionally Solidified Ti-47Al-1.0W-0.5Si Alloy

Ternary eutectic growth and associated tensile properties of directionally solidified Al87Si11Ni2 alloy

Growth mechanisms of dendrites and eutectics within undercooled liquid Al-Ni alloys

Microstructure Evolution and Nano-Hardness Modulation of Rapidly Solidified Ti–Al–Nb Alloy

Dendritic Morphology Evolution and Microhardness Enhancement of Rapidly Solidified Ni-based Superalloys

Influence of Growth Rate on Microstructural Length Scales in Directionally Solidified NiAl-Mo Hypo-Eutectic Alloy

Tungsten Wires and Porous NiAl Prepared Through Directional Solidification and Selective Dissolution

Effect of Growth Rate on Microstructure Evolution and Hardness in Directionally Solidified Ti-50Al-6Nb Alloy

Dependency of Microhardness on Solidification Processing Parameters and Microstructure Characteristics in the Directionally Solidified Ti–46Al–0.5W–0.5Si Alloy

Effect of Growth Rate and Diameter on Microstructure and Hardness of Directionally Solidified Ti–46Al–8Nb Alloy

Effects of Withdrawal Rate and Temperature Gradient on the Microstructure Evolution in Directionally Solidified NiAl-36Cr-6Mo Hypereutectic Alloy