Abstract:Abstract In this work, the microstructure, precipitations, crystal orientation and texture of an Inconel 718 superalloy manufactured by selective laser melting (SLM) are investigated by performing post heat treatment. Horizontal and vertical reference faces are examined in the as-built condition, solution conditions for 0.5 and 1 h, and aging condition, respectively. In the as-built condition, Inconel 718 superalloy exhibited cellular and columnar dendrites, a large amount of the fine Laves phase, and several γ ′ phases. During post treatment, the grain size on the horizontal face is changed, which is ranged from 502.23 to 523.55 μ m 2 per grain. Meanwhile, grains coarsened distinctly on the vertical face. The average area of the grain is 739.48 μ m 2 in the as-built condition and increases to 898.19 μ m 2 in the aging condition. Additionally, the amount of MC carbides, γ ′, and γ ′′ strengthening phases increased as well during the post heat treatment process, while that of the Laves phase decreased after solution treatment. The preferred orientation on the horizontal face was 〈111〉//X, 〈001〉//Y in the as-built condition, and 〈101〉//Z in the solution and aging conditions. The preferred orientation on the vertical face was 〈001〉//X, 〈101〉//Y in the as-built condition, 〈101〉//Y in the solution condition, and 〈001〉//X in the aging condition. The orientation distribution function (ODF) analysis showed that the main textures in the as-built and solution conditions were {110}〈110〉 and {110}〈112〉, respectively, which transformed to {001}〈100〉 and {001}〈110〉 during aging. The values of multiples of uniform density (mud) in both horizontal and vertical reference faces the aforementioned preferred orientation and texture increased during post heat treatment. Application of post heat treatment can lead to an ideal microstructure Inconel 718 superalloy manufactured by SLM.

Influence of Build Orientation on Microstructure, Mechanical and Corrosion Behavior of Inconel 718 Processed by Selective Laser Melting

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

Effect of building directions on the surface roughness, microstructure, and tribological properties of selective laser melted Inconel 625

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Effect of scanning strategies on microstructure and wear behavior of Inconel 718 fabricated by Selective Laser Melting

Microstructures and Mechanical Behaviors of Additive Manufactured Inconel 625 alloys via Selective Laser Melting and Laser Engineered Net Shaping

Microstructure and Electrochemical Corrosion Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting

On the Microstructure and Tensile Properties of Inconel 718 Alloy Fabricated by Selective Laser Melting and Conventional Casting

Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting

Effects of laser scanning speed and building direction on the microstructure and mechanical properties of selective laser melted Inconel 718 superalloy

Effect of Laser Energy Density on the Microstructure and Microhardness of Inconel 718 Alloy Fabricated by Selective Laser Melting

Effect of heat treatment on microstructure and mechanical properties of selective laser melted Inconel 718 alloy

Influences of Tilt Angles on Microstructure and Mechanical Properties of 316L Stainless Steel Parts Fabricated by Selective Laser Melting (SLM)

Mechanical Properties and Microstructure of Inconel 718 Lattice Structures Produced by Selective Laser Melting Process

Microstructural evolution and mechanical properties of Inconel 718 alloy manufactured by selective laser melting after solution and double aging treatments

Effects of Specimen Orientation and Heat Treatment on Microstructure and Crack Propagation Path of the IN718 Alloy Built by the Additive Manufacturing Process

Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition

Effects of post heat treatment on the microstructure evolution of Inconel 718 manufactured by selective laser melting

Study on Mechanism of Structure Angle on Microstructure and Properties of SLM-Fabricated 316L Stainless Steel

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Effect of Laser Energy Density on the Microstructure, Mechanical Properties, and Deformation of Inconel 718 Samples Fabricated by Selective Laser Melting