Abstract:Over the past few decades, tremendous efforts have been focused on the development of lithium ion batteries (LIBs) used in portable electronics and electric vehicles because of their high energy density and long cycle life. However, the large-scale application of LIBs is hindered by the high cost and the scarcity of lithium resources. In contrast, sodium ion batteries (SIBs) represent potential alternatives for large-scale energy storage due to low-cost and abundant resources. Nevertheless, the sluggish Na-ion transport and severe volume expansion currently limit the rate performance and stability of the SIBs respectively. To address these issues, one effective approach is to utilize the incorporation of pseudocapacitive charge storage into SIBs. Pseudocapacitive charge storage is based on the faradic reaction that occurs on or near the surface of the electrode materials. Some of the materials exhibit pseudocapacitive features in nature, for example, RuO2, MnO2 and Nb2O5. In addition, other materials display the capacitive characteristics with nanoscale morphologies such as TiO2, MoO2 and V2O5. Previous studies1-2 showed great promise towards high-rate electrodes in LIBs and SIBs driven by a pseudocapacitive mechanism. Inspired by this, it is highly expected to achieve superior rate capability and long cycle life of SIBs by introducing pseudocapacitive charge storage in electrodes. In order to take advantage of fast pseudocapacitive charge storage kinetics, we report a sandwich composite anode material where the ultrafine TiO2 and MoO2 nanoparticles are embedded between the layers of carbon nanotube (CNT) and amorphous carbon. (referred to as CNT-TiO2@MoO2-C). The unique sandwich nanoarchitecture and the ultrafine TiO2 and MoO2 nanoparticle can not only significantly decrease the ion diffusion length but also effectively accommodate the volume expansion. Fig.1 shows the long-term cycling performance of the CNT-TiO2@MoO2-C electrode for over 8000 cycles at a current rate of 10A g–1. After a slow capacity fading in the initial dozens of cycles, a reversible capacity of 200 mAhg–1 was maintained during the subsequent cycles, indicating a superior long-term cyclability. In summary, we reported an innovative design of sandwich nanoscale architecture. Based on this rational and unique morphology, the CNT-TiO2@MoO2-C shows an excellent cycling stability up to 8 000 cycles. References 1.Chen, Z. et al. High-performance sodium-ion pseudocapacitors based onhierarchically porous nanowire composites. ACS Nano 6, 4319–4327 (2012). Chen, C. et al. Na intercalation pseudocapacitance in graphene-coupledtitanium oxide enabling ultra-fast sodium storage and long-term cycling. Nat. Commun. 6, 6929 (2015). Yu, P., Li, C. &Guo, X. Sodium storage and pseudocapacitive charge intextured Li4Ti5O12 thin films. J. Phys. Chem. C 118, 10616–10624 (2014) Acknowledgements This work was supported by the Natural Science Foundation of China (21676165, 21573147 and 21506123), the National Key Research and Development Program (2016YFB0901500). Figure 1

Ultrafast Na+-storage in TiO2-coated MoS2@N-doped Carbon for High-Energy Sodium-Ion Hybrid Capacitors

Confined Seeds Derived Sodium Titanate/graphene Composite with Synergistic Storage Ability Toward High Performance Sodium Ion Capacitors

Carbon Coated MoS2 Nanosheets Vertically Grown on Carbon Cloth As Efficient Anode for High-Performance Sodium Ion Hybrid Capacitors

Ultrafine MoO2-Carbon Microstructures Enable Ultralong-Life Power-Type Sodium Ion Storage by Enhanced Pseudocapacitance

Enhancing Pseudocapacitive Behavior of MOF-derived TiO2-x@Carbon Nanocubes Via Mo-doping for High-Performance Sodium-Ion Capacitors

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

S/N Co-Doped Ultrathin TiO2 Nanoplates as an Anode Material for Advanced Sodium-Ion Hybrid Capacitors

Enhanced Ionic/Electronic Transport in Nano‐TiO2/Sheared CNT Composite Electrode for Na+ Insertion‐based Hybrid Ion‐Capacitors

Oxygen-vacancy-rich TiO2-coated carbon nanofibers for fast sodium storage in high-performance sodium-ion hybrid capacitors

Graphene wrapped TiO2@MoSe2 nano-microspheres with sandwich structure for high-performance sodium-ion hybrid capacitor

Hierarchical MoO2@TiO2-Carbon Nanostructure Enable Ultrafast and High-Capacity Na-Ion Storage by Enhanced Pseudocapacitance

Carbon-incorporated NaTi2(PO4)3 on carbon cloth as a binder-free anode material for high-performance aqueous sodium-ion hybrid capacitors

The Dual-Function Sacrificing Template Directed Formation Of Mos2/C Hybrid Nanotubes Enabling Highly Stable And Ultrafast Sodium Storage

Mn3O4 Nanoparticles in Situ Embedded in TiO2 for High-Performance Na-ion Capacitor: Balance Between 3D Ordered Hierarchically Porous Structure and Heterostructured Interfaces

Mechanically flexible V3S4@carbon composite fiber as a high-capacity and fast-charging anode for sodium-ion capacitors

Nano-porous Structure Architectonics of MoS2 Nanosheets with Flexible Electrode Membrane for Designing Ultrastable Sodium-Ion Hybrid Capacitor

Design of kinetic well-matched Mo2C nanoparticles anchored into 3D hierarchical porous carbon towards high-rate sodium ion storage

Highly Conductive Mo2C Nanofibers Encapsulated in Ultrathin MnO2 Nanosheets As a Self-Supported Electrode for High-Performance Capacitive Energy Storage.

Flexible Quasi‐Solid‐State Sodium‐Ion Capacitors Developed Using 2D Metal–Organic‐Framework Array As Reactor

Reversible and Fast Na-ion Storage in MoO2/MoSe2 Heterostructures for High Energy-High Power Na-ion Capacitors

Covalent Fixing of MoS 2 Nanosheets with SnS Nanoparticles Anchored on g-C 3 N 4 /Graphene Boosting Fast Charge/Ion Transport for Sodium-Ion Hybrid Capacitors