Abstract:We propose and demonstrate a four-wavelength-switchable erbium-doped fiber laser (4WS-EDFL) with a four-channel superimposed high-birefringence fiber Bragg grating (SI-HBFBG) and a dual-coupler ring based compound-cavity (DCR-CC) filter. Both for the first time, a SI-HBFBG as a four-channel reflective filter is used in a multi-wavelength switchable fiber laser to define wavelength channels and a DCR-CC filter is used to select a single mode from dense longitudinal-modes in a fiber laser. We present in detail how to design, fabricate, and characterize the DCR-CC filter with both theoretical analysis and experimental results, which we believe is the first systematic approach for making a compound-cavity based filter used for selecting single-longitudinal mode (SLM) in a fiber laser. The enhanced polarization hole burning effect in a 2.9 m long erbium-doped fiber, coiled inside a three-loop polarization controller, and the polarization-mismatch-induced losses are introduced into the laser cavity to achieve wavelength-switching operations. We show that the 4WS-EDFL can be switched among fifteen lasing states, including four single-wavelength operations, six dual-wavelength operations, four three-wavelength operations and one four-wavelength operation, all with high stability. For demonstration, in switchable single-wavelength operations, the four SLM lasing outputs measured are all with an optical signal to noise ratio of >80 dB, a linewidth of <700 Hz, a relative intensity noise of ≤-156.7 dB/Hz at frequencies over 3 MHz, an output power fluctuation of ≤0.555 dB and excellent polarization characteristics.

Filtering of stimulated Raman scattering in a monolithic fiber laser oscillator using chirped and tilted fiber Bragg gratings

Raman suppression in high-power fiber oscillators by femtosecond-written chirped and tilted fiber Bragg gratings

Tunable and Programmable Fiber Ring Laser Based on Digital-Controlled Chirped Fiber Bragg Grating

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Raman suppression in high-power fiber laser oscillator by long period fiber grating

Design and fabrication of wideband chirped tilted fiber Bragg gratings

Raman suppression in 5 kW fiber amplifier using long period fiber grating fabricated by CO2 laser

Stimulated Raman scattering suppression by intensified four-wave mixing process in narrow-linewidth fiber oscillator

Fabrication of cascaded wideband LPFGs by CO2 laser and Raman suppression in a 5 kW one-stage MOPA fiber laser

Robust femtosecond-written chirped and tilted fiber Bragg gratings for Raman filtering in multi-kW fiber lasers

High Order Cascaded Raman Random Fiber Laser with High Spectral Purity

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Multiwavelength Linear-Cavity Fiber Laser Source Using a Sagnac Interferemetric Filter and a Strain-Induced Chirped Fiber Grating

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

Utilizing phase-shifted long-period fiber grating to suppress spectral broadening of a high-power fiber MOPA laser system

Slope efficiency over 30% single-frequency ytterbium-doped fiber laser based on Sagnac loop mirror filter

Efficient high-power 1.9 μm picosecond Raman laser in H 2 -filled hollow-core fiber without generation of rotational lines

Four-wavelength-switchable SLM fiber laser with sub-kHz linewidth using superimposed high-birefringence FBG and dual-coupler ring based compound-cavity filter

Refined Spectral Regulation of Chirped Fiber Bragg Gratings

C-band 41-wavelength-switchable single-longitudinal-mode fiber laser with sub-kHz linewidth and high stability using a wide-band chirped Moiré fiber Bragg grating