Abstract:Solid-state electrolytes are key materials for developing high-safety solid-state Li-ion batteries. The garnet-type Li7La3Zr2O12 (LLZO) solid electrolyte is one of the most promising solid electrolytes due to its high conductivity and feasible preparation in ambient air. Among several dopants, Ta-doped LLZO (Ta-LLZO) delivers high stability against lithium metal and high conductivity, which attracts lots of researchers. However, production of Ta-LLZO ceramics is less problematic due to the complicated gas–liquid–solid sintering mechanism. This work aims to develop an efficient method to produce Ta-LLZO solid electrolyte ceramic pellets, including providing a stacking sintering method and optimizing the amount of excessive Li source, the wet milling duration, and the sintering temperature. First, a low-cost, efficient “gravel-separator” strategy is provided for multiple sintering of LLZO. Second, the Li6.5La3Zr1.5Ta0.5O12 (Ta5) samples with different excessive Li levels (2, 4, 6, and 8%) are sintered at various sintering conditions of 1240 °C for 60 min, 1280 °C for 20 min, and 1320 °C for 2 min to search for the optimum excessive amount of Li. Third, Ta5 samples with optimized excessive Li (4, 6%) after milling for longer duration are sintered at 1280 °C for 30 min, 1300 °C for 10 min, 1320 °C for 10 min, 1320 °C for 30 min to finally optimize the preparation craft. After optimization, the Ta5 ceramics with excessive 4 and 6% Li sintered at 1320 °C for 10 min deliver homogeneous and dense cross-sectional morphology, high conductivity of over 1 × 10–3 S cm–1 at room temperature, and relative densities of above 96%. Furthermore, symmetric Li cells assembled with the Ta-LLZO solid electrolyte prepared with the optimized method deliver a critical current density of 1.28 mA cm–2 at 30 °C and over 1000 h of stable cycling at 0.2 mA cm–2 (0.2 mA h cm–2) at 30 °C.

High Li+-conductive Perovskite Li3/8Sr7/16Ta3/4Zr1/4O3 Electrolyte Prepared by Hot-Pressing for All-Solid-state Li-ion Batteries

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Highly Dense Perovskite Electrolyte with a High Li+ Conductivity for Li–ion Batteries

Li-ion conductivity and stability of hot-pressed LiTa 2 PO 8 solid electrolyte for all-solid-state batteries

Li-ion conductivity and stability of hot-pressed LiTa2PO8 solid electrolyte for all-solid-state batteries

Rhombohedral Li1+xYxZr2-x(PO4)3 Solid Electrolyte Prepared by Hot-Pressing for All-Solid-State Li-Metal Batteries

Effect of Sintering Temperature and Holding Time on Ionic Conductivity for Li6.4La3Zr1.4Ta0.6O12 Electrolyte

Remarkably Improved Ionic Conductivity and Lithium Metal Compatibility of LLZTO-Li4(BH4)3I Composite Solid-State Electrolyte

Effect of Extra Li Content on the Property of Tetragonal Li7La3Zr2O12 Solid Electrolyte Prepared by Auto-Consolidation Method

Long-Life All-Solid-State Batteries Enabled by Cold-Pressed Garnet Composite Electrolytes with Enhanced Li+ Conduction

Influence of Dry‐ and Wet‐milled LLZTO Particles on the Sintered Pellets

Enhancement of Density and Ionic Conductivity for Garnet-Type Li5La3Ta2O12 Solid Electrolyte by Self-Consolidation Strategy

A Simple and Highly Efficient Method toward High-Density Garnet-Type LLZTO Solid-State Electrolyte

Low-Temperature Sintering of a Garnet-Type Li6.5La3Zr1.5Ta0.5O12 Solid Electrolyte and an All-Solid-State Lithium-Ion Battery.

Synthesis of Li7La3Zr2O12 Solid Electrolyte by Solid Phase Sintering Method

Fast and low-temperature densification of highly conductive Li7La3Zr2O12 ceramic electrolytes for solid-state batteries

A simple and effective method to prepare dense Li1.3Al0.3Ti1.7(PO4)3 solid–state electrolyte for lithium-oxygen batteries

Stable Lithium-Ion Conducting Perovskite Lithium–strontium–tantalum–zirconium–oxide System

Enhanced densification and ionic conductivity of Li-garnet electrolyte: Efficient Li2CO3 elimination and fast grain-boundary transport construction

Low-Temperature Manufacture of Cubic-Phase Li7La3Zr2O12 Electrolyte for All-Solid-State Batteries by Bed Powder

Production of Ta-Doped Li 7 La 3 Zr 2 O 12 Solid Electrolyte with High Critical Current Density