Abstract:Pores in coal and their connectivity are important properties of coal, providing network or channels for gas storage and migration within coal, e.g. during the coalbed methane (CBM) recovery. To investigate the growth characteristics and genetic types of pores in coal in terms of macropore and mesopore, the pores of a high-rank coal were measured by various techniques such as the mercury intrusion method, nitrogen adsorption, focused ion beam scanning electron microscopy (FIB-SEM), and X-ray micro-CT (Computed Tomography). Two high-rank coals formed from regional metamorphism collected from the southern Qinshui basin were selected. The FIB-SEM and X-ray micro-CT provides detailed experimental information for development of a three dimensional (3D) pore network model, which was further used to characterize the pore connectivity. Volume percent of pores of these high-rank coals are dominated by mesopores of approximately 10–50nm in width, and then followed by micropores, along with the smallest volume percent of macropores. The connectivity within this high-rank coal was mesopore-dominated pore network. Electron microscopy observations further revealed there are coalification-related pores and mineral-related pores in the high-rank coal. The coalification-related pores can be classified as secondary gas pores in organic matter and shrinkage-induced pores around quartz and clay minerals; and the mineral-related pores are developed within minerals, and can be classified as dissolution-created pores and intercrystalline pores. The secondary gas pores are macropores and have poor connectivity. The mineral-related pores can be both macropores and mesopores, and have little influence on pore connectivity due to small content of carbonate minerals in these samples. Under electron microscopy, the shrinkage-induced pores are mainly mesopores. The regional metamorphism, with a high abnormal old thermal field in the research area, is the precondition of the formation of the shrinkage-induced pores. The quartz and clay minerals in the coal provide different formation conditions and hence form different shapes of the shrinkage-induced pores. The coal samples include a large number of shrinkage-induced pores that act as the interconnected pores in the coal and exhibit good connectivity. The quartz and clay minerals play a significant role in developing the interconnected pores in the high-rank coal formed from regional metamorphism.

A Methodology for Characterizing the Multiscale Pores and Fractures in Anthracite and Semi-Anthracite Coals and Its Application in Analysis of the Storage and Permeable Capacity of Coalbed Methane

Methodology of Three-Dimensional Visualization and Quantitative Characterization of Nanopores in Coal by Using FIB-SEM and Its Application with Anthracite in Qinshui Basin

Characterization of the pore structure in Chinese anthracite coal using FIB-SEM tomography and deep learning-based segmentation

Characterization of pores and fractures of coal based on CT scan

Pore-Fracture Multi-Scale Characterizations of Different Marcolithotypes of Medium-Rank Coals in Jixi Basin, China

Full-Scale Pore and Microfracture Characterization of Deep Coal Reservoirs: A Case Study of the Benxi Formation Coal in the Daning–Jixian Block, China

Characterizing Nanoscale Pores and Its Structure in Coal: Experimental Investigation

Research on the Multiscale Microscopic Pore Structure of a Coalbed Methane Reservoir

Accurate characterization of coal pore and fissure structure based on CT 3D reconstruction and NMR

Multi-Scale Characterization of Pores and Fractures in Coals with Different Coal-Body Structures from the Jincheng Mine, Qinshui Basin, Northern China

Quantitative characterization of coal microstructure and visualization seepage of macropores using CT-based 3D reconstruction

Multi-scale characteristics of coal structure by x-ray computed tomography (x-ray CT), scanning electron microscope (SEM) and mercury intrusion porosimetry (MIP)

Quantitative characterization of pore-fracture structure of medium and high-rank coal based on micro-CT technology

Characterizing the shape, size, and distribution heterogeneity of pore-fractures in high rank coal based on X-ray CT image analysis and mercury intrusion porosimetry

Image-based quantitative probing of 3D heterogeneous pore structure in CBM reservoir and permeability estimation with pore network modeling

Characteristics of a Multi-scale Fracture Network and Its Contributions to Flow Properties in Anthracite

Nanoscale pore structure and mechanical property analysis of coal: An insight combining AFM and SEM images

Fib-Sem and X-Ray Ct Characterization of Interconnected Pores in High-Rank Coal Formed from Regional Metamorphism

Comprehensive Analysis of Connectivity and Permeability of a Pore-Fracture Structure in Low Permeability Seam of Huainan-Huaibei Coalfield

Pore-Scale Permeability Characteristics of Deep Coalbed Methane Reservoirs

3D microfracture network and seepage characteristics of low-volatility bituminous coal based on nano-CT