Abstract:Composites synthesized through the deposition of Mn 3 O 4 on graphene, carbon nanotube and other carbon based materials have attracted much attention recently as potential electrode materials for different electrochemical applications such as pseudocapacitor; Lithium-ion battery; and catalysis. The primary reason Mn 3 O 4 is grown on these substrates in spite of having high charge storage capacity as pseudocapacitor or Lithium-ion battery electrodes on its own is to enhance its electrical conductivity and/or to impart flexibility to the electrode, which is difficult for a fully metallic electrode. Higher electrical conductivity prolongs the cycle life of an electrode. In addition, the substrate contributes capacity and thus, enhances the overall energy density of an electrode. Mn 3 O 4 acts as a spacer and keeps graphene nanosheets separated when used as the substrate for capacitor electrode fabrication. This helps retain the high surface area of graphene nanosheets in the electrode which contributes additional capacitance. Mn 3 O 4 supported on graphene and other carbon substrates have recently been investigated as catalyst for methanol electro-oxidation in alkaline media; CO oxidation; and Oxygen reduction reaction (ORR). High surface area substrate uniformly distributes metal particles and prevents their agglomeration and dissolution during catalytic process. In addition, high electrical conductivity of graphene and carbon substrates enhances the electronic conductivity of Mn 3 O 4 which is of importance for superior catalytic activity. Composite of Mn 3 O 4 combined with carbon based substrate has also found non-electrochemical application such as the removal of Pb and Cu ions from aqueous solution because of their adsorptive behaviour. A myriad of procedures have been adopted for the synthesis of Mn 3 O 4 on graphene or other carbonaceous substrates. All of these methods involve one or more of the following factors that complicate the process, such as: long synthesis time; high synthesis temperature; use of hazardous/toxic chemicals; multistep process and the requirement for sophisticated device or highly controlled environment. In fact, the complicacies associated with the synthesis of Mn 3 O 4 have already been acknowledged and investigations have been directed at finding relatively simpler route such as the use of microwave technique. In this research, we report the synthesis of clusters of nearly octahedral shapedn Mn 3 O 4 nanoparticles on few-layer graphene nanoplatalet (GnP) surface through a simple, wet-chemical, polyethyleneimine (PEI) mediated route. Few-layer graphene nanoplatelets are ultrathin particles of graphite prepared through proprietary intercalation and exfoliation method (XG Sciences, Inc., Lansing, MI, USA). The components involved in this synthesis method are manganese salts (KMnO 4 and MnSO 4 .H 2 O); water; PEI; and GnP as the substrate. The synthesis is carried out at a temperature of 80°C only and in open air. Highly crystallized Mn 3 O 4 particles, as observed by X-Ray Diffraction (XRD), can be synthesized on GnP surface. It has also been observed that PEI acts as a reducing agent and as a capping agent on a continuous network of ribbon-like Birnessite-MnO 2 (IV) to produce a nearly octahedral shaped nanoparticles of Mn 3 O 4 (II, III). It has already been mentioned that composites of Mn 3 O 4 on graphene or other carbonaceous substrates find a myriad of applications. Thus, our research findings to synthesize GnP-Mn 3 O 4 composite through a simple method should be of interest to a broad group of researchers. In this research, we have investigated the performance of this composite system as a Lithium-ion battery anode only. Our preliminary investigations reveal that the Mn 3 O 4 composite synthesized through this method has just as much potential as the ones prepared through other alternative methods.

Synthesis and Characterization of Mn 3 O 4 -Graphene Nanocomposite thin Film by an ex situ Approach

Synthesis And Electrochemical Properties Of Co Doped Mno2 Framework With Nanofibrous Structure

Fabrication and Electrochemical Performance of Nanofibrous Micro-Frameworks of Α-Mno2

Graphene Oxide--mno2 Nanocomposites for Supercapacitors.

Synthesis of Clustered Mn3O4 Nanoparticles through a Polymer Surfactant Mediated Route on Few-Layer Graphene Nanoplatelet Surface and its Application for Electrochemical Energy Storage: Lithium-ion Battery Anode

Microwave-Assisted Synthesis of Graphene Oxide-MnO<sub>2</sub> Composites for Supercapacitors

One-step electrochemical approach to the synthesis of Graphene/MnO<sub>2</sub> nanowall hybrids

One-step electrochemical approach to the synthesis of Graphene/MnO 2 nanowall hybrids

The Synthesis of Shape-Controlled Mno2/Graphene Composites Via A Facile One-Step Hydrothermal Method and Their Application in Supercapacitors

Enhancement of photocatalytic by Mn3O4 spinel ferrite decorated graphene oxide nanocomposites

Producing "symbiotic" Reduced Graphene Oxide/Mn3O4 Nanocomposites Directly from Converting Graphite for High-Performance Supercapacitor Electrodes.

Green growth of mixed valence manganese oxides on quasi-freestanding bilayer epitaxial graphene-silicon carbide substrates

Manganese and Graphene Included Titanium Dioxide Composite Nanowires: Fabrication, Characterization and Enhanced Photocatalytic Activities

Electrochemical Synthesis of Graphene/MnO2 Nano-Composite for Application to Supercapacitor Electrode

In Situ Chemical Synthesis of Sandwich-Structured MnO2/graphene Nanoflowers and Their Supercapacitive Behavior

Ferromagnetism of MnO anchored on graphene with N dopant

One-pot hydrothermal synthesis of Mn3O4/graphene nanocomposite for supercapacitors

One Step Synthesis of Graphene Oxide−Magnetic Nanoparticle Composite

Structural, optical, morphological, and supercapacitive studies of electrophoretically deposited nanostructured Mn 3 O 4 thin films

Synthesis and Surface Characterization of Γ-Mno2 Nanostructures

Synthesis of Mn3O4 Octahedrons and Other Manganese-Based Nanostructures Through a Simple and Green Route