The hydrolysis of pteroylpolyglutamates in the small intestine.

M. Jägerstad,A. Westesson

DOI: https://doi.org/10.1080/00365521.1974.12096889

Scandinavian Journal of Gastroenterology

Abstract:

What problem does this paper attempt to address?

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Jinzuan Wang,Jun Yang,Tao Huang,Wenyan Yin

DOI: https://doi.org/10.1039/c6ra21281f

IF: 4.036

2016-01-01

RSC Advances

Abstract:Self-assembled manganese cobalt oxide (Mn0.5Co2.5O4) nanofibers sandwiched in graphene sheets (Mn0.5Co2.5O4@G) are successfully synthesized by a hydrothermal treatment and annealing process. Owning to the unique sandwich-like structures, rich active sites, and boosted electrical conductivity, Mn0.5Co2.5O4@G composite demonstrates superior electrochemical performance for potential supercapacitors. In a three-electrode system, it exhibits excellent cycling stability with a specific capacitance retention of 93.8% after 10 000 cycles at a current density of 10 A g(-1,) and achieves specific capacitances of 617 and 434 F g(-1) at the ultrahigh current densities of 30 and 40 A g(-1), respectively. For an asymmetric supercapacitor of Mn0.5Co2.5O4@G/AC, high energy densities of 36.8 and 13.6 W h kg(-1) are also achieved at power densities of 147.3 and 3755.8 W kg(-1), respectively. It is believed that the synthesized Mn0.5Co2.5O4@G composite can be a promising electrode material for high-performance supercapacitors, and the present synthetic strategy can be further extended for designing many other functional composites with desirable nanostructures and performance.
Synthesis of the Graphene/Nickel Oxide Composite and Its Electrochemical Performance for Supercapacitors

Yiming Chen,Zidong Huang,Haiyan Zhang,Yuting Chen,Zhengdong Cheng,Yaobing Zhong,Yipeng Ye,Xianling Lei

DOI: https://doi.org/10.1016/j.ijhydene.2014.01.165

IF: 7.2

2014-01-01

International Journal of Hydrogen Energy

Abstract:A hybrid material composed of high density graphene/nickel oxide (RG/NiO) has been prepared by microwave-assisted in situ method of NiO at the defects of graphene. Graphene (RG) is obtained by thermal expansion of graphite oxide (GO). Graphene/nickel oxide composite is prepared by hydrothermal synthesis of aqueous mixture of RG and Ni(NO3)(2), followed by microwave irradiation of the hydrothermal synthesis product. SEM and TEM images show that NiO with size of 20-50 nm are uniformly distributed on the RG substrate. RG/NiO composite electrodes exhibit good electrochemical performance with a maximum specific capacitance of 617 F g(-1) at the charge/discharge current density of 1 A g(-1) with 5 M NaOH electrolyte. After 5000 cycling DC tests, a high level specific capacitance of 613 F g(-1) is obtained (99.4% retention of the initial capacity), suggesting excellent long-term cycling stability. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Microwave-Assisted Synthesis of Graphene Oxide-MnO<sub>2</sub> Composites for Supercapacitors

Ying Wen Duan,Xun Sun,Hong Yu Zhao,Zhi Bo Liu

DOI: https://doi.org/10.4028/www.scientific.net/amr.936.607

2014-01-01

Advanced Materials Research

Abstract:Graphene oxide-MnO2 (GO-MnO2) was successfully synthesized by microwave-assisted method with the substrate of GO covered by MnO2. MnO2 contained disordered pore structure and aggregate of random shape. GO exhibited layer-like shape and had a large numbers of functional groups on its surface. The electrochemical measurements were employed by cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD), the results showed that the GO-MnO2 composite had good capacitive performance, the maximum of specific capacitance was 127 F g-1 at the current density of 100 mA g-1.
Rapid Synthesis of Graphene/amorphous Α-Mno2 Composite with Enhanced Electrochemical Performance for Electrochemical Capacitor

Mingjun Pang,Guohui Long,Shang Jiang,Yuan Ji,Wei Han,Biao Wang,Xilong Liu,Yunlong Xi

DOI: https://doi.org/10.1016/j.mseb.2014.12.028

2015-01-01

Abstract:Nanostructured graphene/amorphous alpha-MnO2 composites have been synthesized by a facile co-precipitation method under the alkaline condition, in which graphene nanosheets as a supporting substrate to grow MnO2. Characterizations of prepared samples' morphology and microstructures indicate MnO2 is successfully formed on the surface of graphene by electrostatic interaction. Moreover, the electrochemical properties of the synthesized electrode materials for supercapacitors are studied in a three-electrode experimental setup using a 1 M KOH aqueous solution as the electrolyte. As a result, the specific capacitance of graphene/MnO2 composite (weight ratio of graphene to MnO2 is 1:1) determined by a galvanostatic charge-discharge method at a current density of 1 Ag-1 reaches 367 Fg(-1), which is 1.8 and 4.6 fold higher than that of pure graphene and MnO2. The capacity retention of the graphene/MnO2 composite is 73.9% of the original capacitance after 1000 cycles, indicating graphene/MnO2 composite is a promising electrode material for supercapacitors. (C) 2015 Elsevier B.V. All rights reserved.
Facile Synthesis of MnPO4·H2O Nanowire/Graphene Oxide Composite Material and Its Application as Electrode Material for High Performance Supercapacitors

Bo Yan,Duan Bin,Fangfang Ren,Zhiping Xiong,Ke Zhang,Caiqin Wang,Yukou Du

DOI: https://doi.org/10.3390/catal6120198

IF: 3.9

2016-12-09

Catalysts

Abstract:In this work, we reported a facile one-pot hydrothermal method to synthesize MnPO4·H2O nanowire/graphene oxide composite material with coated graphene oxide. Transmission electron microscopy and scanning electron microscope were employed to study its morphology information, and X-ray diffraction was used to study the phase and structure of the material. Additionally, X-ray photoelectron spectroscopy was used to study the elements information. To measure electrochemical performances of electrode materials and the symmetry cell, cyclic voltammetry, chronopotentiometry and electrochemical impedance spectrometry were conducted on electrochemical workstation using 3 M KOH electrolytes. Importantly, electrochemical results showed that the as-prepared MnPO4·H2O nanowire/graphene oxide composite material exhibited high specific capacitance (287.9 F·g−1 at 0.625 A·g−1) and specific power (1.5 × 105 W·kg−1 at 2.271 Wh·kg−1), which is expected to have promising applications as supercapacitor electrode material.

chemistry, physical
Electrochemical performance of Mn3O4/graphene composite deposited on nickel foam as promising electrode material for supercapacitor application

Ghulam Mustafa,Kaifei Qi,Sara Khademi,Said Nasir Khisro,Gohar Mehboob,Yanlong Tai

DOI: https://doi.org/10.1007/s10854-024-12081-x

2024-02-24

Journal of Materials Science Materials in Electronics

Abstract:The supercapacitor energy storage system has achieved a great attention, in future perspective, as compared to ordinary dielectric capacitors and batteries. The nature and type of electrode material employed in supercapacitor applications is critical to the electrochemical performance of a supercapacitor. Herein, co-precipitation derived Mn 3 O 4 nanoparticles were mixed with graphite in a simple way and obtained uniformly mixed composite of exfoliated graphene with these nanoparticles. The electrochemical study of these composites revealed promising results for supercapacitor applications. X-ray diffraction study revealed the formation of single-phase Mn 3 O 4 nanoparticles. The composite was probed for microstructural examination, by scanning electron microscopy, which revealed that Mn 3 O 4 was uniformly embedded in exfoliated graphene sheets, aimed specifically for better electrochemical performance. The elemental composition was studied by energy dispersive X-rays spectroscopy and electrochemical performance of the composite deposited on Nickel foam for electrode using polyvinyl alcohol (PVA, 10%) as a binder has been examined by cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy in 1M K 2 SO 4 electrolyte. In addition, different ratios of Mn 3 O 4 /graphene were prepared to investigate composition dependent performance of these composites. The highest value of specific capacitance achieved for composition (1:2) was 334 F/g at scan rate of 5 mVs −1 .

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Fast and Reversible Surface Redox Reaction of Graphene–mno2 Composites As Supercapacitor Electrodes

Jun Yan,Zhuangjun Fan,Tong Wei,Weizhong Qian,Milin Zhang,Fei Wei

DOI: https://doi.org/10.1016/j.carbon.2010.06.047

IF: 10.9

2010-01-01

Carbon

Abstract:We present a quick and easy method to synthesize graphene–MnO2 composites through the self-limiting deposition of nanoscale MnO2 on the surface of graphene under microwave irradiation. These nanostructured graphene–MnO2 hybrid materials are used for investigation of electrochemical behaviors. Graphene–MnO2 composite (78wt.% MnO2) displays the specific capacitance as high as 310Fg−1 at 2mVs−1 (even 228Fg−1 at 500mVs−1), which is almost three times higher than that of pure graphene (104Fg−1) and birnessite-type MnO2 (103Fg−1). Interestingly, the capacitance retention ratio is highly kept over a wide range of scan rates (88% at 100mVs−1 and 74% at 500mVs−1). The improved high-rate electrochemical performance may be attributed to the increased electrode conductivity in the presence of graphene network, the increased effective interfacial area between MnO2 and the electrolyte, as well as the contact area between MnO2 and graphene.
Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Lijun Su,Shulai Lei,Li Liu,Lingyang Liu,Yuefei Zhang,Siqi Shi,Xingbin Yan

DOI: https://doi.org/10.1039/c8ta02982b

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Quantum dots (QDs)/graphene composites are interesting as promising electrode materials for high-performance supercapacitors because they can well integrate the complementary features of QDs and graphene. Herein, we demonstrate a MnFe2O4 QDs/nitrogen-doped graphene (NG) material prepared by a controllable solvothermal synthesis, in which ultra-small MnFe2O4 QDs are uniformly anchored on NG surfaces. First-principles calculations elucidate that the oxygen-containing groups of graphene oxide play a crucial role in generating such a structure, and a ferrite octahedral skeleton is firstly formed followed by Mn atom insertion. Powdery MnFe2O4 QDs/NG exhibits a high specific capacitance of 517 F g(-2) within a negative potential window (-1 approximate to 0 V) in KOH electrolyte. When the lower cut off voltage is extended to -1.2 V, the specific capacitance can be increased to 905 F g(-1). And the condensed MnFe2O4 QDs@NG electrode (forming a similar structure to pitaya slices) with an astonishing loading mass of 18 mg cm(-2) can achieve high areal and volumetric capacitances (5.3 F cm(-2) and 277.6 F cm(-3)). Moreover, carbon encapsulation is favorable for the improvement of rate and cycling performance, allowing a satisfactory capacitance of 150 F g(-1) even at 200 A g(-1) as well as a superior lifetime up to 65000 cycles. These results make such materials competitive with supercapacitor electrodes and may speed up the development of QD-based electrodes for energy storage applications.
Manganese Oxide-Based Electrode Behavior As Materials for Electrochemical Supercapacitors

WAN Houzhao,MIAO Ling,XU Kui,QI Tong,JIANG Jianjun

DOI: https://doi.org/10.3969/j.issn.0438-1157.2013.03.004

2013-01-01

Abstract:As a novel energy storage system,supercapacitors with characteristics of long cycle-life and high rate charge discharge capability,can be applied in many fields.The performance of the electrode material is the most important factor affecting the nature of supercapacitor.MnO2 has advantages in price,environmental friendliness,and easy access.The energy storage mechanism of manganese dioxides electrode materials for supercapacitor was described,and the relationship between nano manganese dioxide microscopic structure and its electrochemical properties was analyzed.The recent developments of synthesis,doping modification,and compounding methods of manganese dioxide-based materials were reviewed from the angle of nanometer manganese dioxides preparation and its comprehensive modification.The main development directions of manganese dioxide-based electrodes for EC application were presented.
Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors

Rui Liu,Rui Jiang,Yu-Han Chu,Wein-Duo Yang

DOI: https://doi.org/10.3390/nano11102736

2021-10-15

Abstract:A novel MnO2/graphene/Ni foam electrode was fabricated via the impregnation and electrochemical deposition technique with Ni foams serving as substrates and graphene serving as a buffer layer for the enhanced conductivity of MnO2. The samples were characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Compared with other methods, our strategy avoids using surfactants and high-temperature treatments. The electrodes exhibited excellent electrochemical performance, high capabilities, and a long cycle life. Various electrochemical properties were systematically studied using cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that the specific capacitance of the MnO2/graphene/Ni composite prepared at 1 mA cm-2 of electrodeposition could achieve a scan rate of 10 mV s-1 at 292.8 F g-1, which confirmed that the graphene layer could remarkably improve electron transfer at the electrolyte-electrode interface. The capacitance retention was about 90% after 5000 cycles. Additionally, a MnO2/graphene//graphene asymmetric supercapacitor was assembled and it exhibited a high-energy density of 91 Wh kg-1 as well as had an excellent power density of 400 W kg-1 at 1 A g-1. It is speculated that the strong adhesion between the graphene and MnO2 can provide a compact structure to enhance the mechanical stability, which can be applied as a new method for energy storage devices.
MnO2-graphene based composites for supercapacitors: Synthesis, performance and prospects

Yue Zhao,Huilian Hao,Tianliang Song,Xu Wang,Changwang Li,Wenyao Li

DOI: https://doi.org/10.1016/j.jallcom.2022.165343

IF: 6.2

2022-09-05

Journal of Alloys and Compounds

Abstract:Supercapacitors stand out among some traditional energy storage devices due to their advantages such as long cycle stability, fast charge-discharge performance and high-power density. Therefore, it is necessary to explore high-performance electrode materials for application in supercapacitors. Manganese dioxide (MnO2) has high theoretical capacitance and high energy density, however, the deterioration of volume expansion and low conductivity directly affect its wide application. Graphene has attracted great interest owing to its invention. The combination of graphene and MnO2 can not only highlight the low resistance, large specific surface area and thermal stability of graphene, but also solve the shortcomings of MnO2 alone as an electrode material. The proposal of composite materials has also promoted the development and application of electrode materials in supercapacitors. Hence, this review aims to summarize the synthetic strategies and research progress of MnO2-graphene based multi-element composites, including the combination of MnO2-graphene with various carbon materials, transition metal oxides and conducting polymers, respectively. Finally, the possible development directions of MnO2-graphene based composite electrode materials in the future are also prospected.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
One-Pot Synthesis of MnO2/Reduced Graphene Oxide Via Hydrothermal Routes for Supercapacitor Applications

Hye-Jin Lee,Navid Noor,C. Gumeci,Drew C. Higgins

DOI: https://doi.org/10.1149/ma2022-01381686mtgabs

2022-07-07

ECS Meeting Abstracts

Abstract:Manganese dioxide (MnO2) is a promising supercapacitor electrode material due to its high theoretical capacitance, low cost and environmental compatibility. However, the electrochemical performance of MnO2 is often limited by low electrical conductivity of MnO2. The MnO2/carbon composites have been successfully demonstrated as an effective way to improve overall electrical conductivity of MnO2 based materials. In this study, we report MnO2/reduced graphene oxide (rGO) composites for high performance supercapacitor applications. The MnO2/rGO composites exhibited 381F/g at a charge/discharge current density of 5 A/g, which was significantly higher as compared to that of pure MnO2 (140 F/g at a charge/discharge current density of 5 A/g). This result indicates that improved capacitance of the MnO2/rGO composites benefited from the incorporated rGO properties, such as high electrical conductivity and large surface area.

Chemistry,Engineering,Materials Science
The Synthesis of Shape-Controlled Mno2/Graphene Composites Via A Facile One-Step Hydrothermal Method and Their Application in Supercapacitors

Xiaomiao Feng,Zhenzhen Yan,Ningna Chen,Yu Zhang,Yanwen Ma,Xingfen Liu,Quli Fan,Lianhui Wang,Wei Huang

DOI: https://doi.org/10.1039/c3ta12780j

IF: 11.9

2013-01-01

Journal of Materials Chemistry A

Abstract:Novel MnO2 petal nanosheet and nanorod/graphene composites are successfully fabricated by a facile one-step hydrothermal method through changing the content of the Mn source. The formation mechanism of different morphologies of MnO2/graphene composites have been studied. The structure of the MnO2/graphene is "sandwich"-like, with MnO2 petal nanosheets and nanorods homogeneously anchored on each side of the graphene. Furthermore, the MnO2/graphene composites with different shapes can be used for supercapacitor electrode materials. The experimental results show that the MnO2 petal nanosheet/graphene composite has better capacitance performance than that of the MnO2 nanorod/graphene composite. The MnO2 petal nanosheet/graphene composite shows excellent specific capacitance as high as 516.8 F g(-1) at a scan rate of 1 mV s(-1) in 1 M Na2SO4 electrolyte and good long-term cycle stability, indicating its potential application to act as a promising electrode material for high-performance supercapacitors. This study provides a facile and in situ method to prepare metal oxide/graphene composite materials and a novel scaffold to construct other metal oxides with graphene for energy storage.
Electrochemical Deposition of MnO2/RGO Nanocomposite Thin Film: Enhanced Supercapacitor Behavior

F. Rahmanabadi,P. Sangpour,A. A. Sabouri-Dodaran

DOI: https://doi.org/10.1007/s11664-019-07361-w

IF: 2.1

2019-06-20

Journal of Electronic Materials

Abstract:In this paper, we investigate supercapacitor behavior properties of MnO2/RGO nanocomposite thin film. The graphene thin film is deposited on the silver paper as a conductive substrate using electrochemical deposition. MnO2 nanostructure is also deposited on reduced graphene oxide, due to its high theoretical specific capacitance (1370 F g−1), through an electrochemical deposition process. The as-prepared MnO2 and MnO2/RGO nanocomposite thin films are characterized by atomic force microscopy, Raman spectroscopy, scanning electron microscopy and x-ray diffraction and based on achieved results a hybrid supercapacitor electrode is assembled. The electrochemical behaviors of the supercapacitor systems are estimated by cyclic voltammetry analysis. The experimental result, indicate that the synergistic effect between the high conductivity of graphene and pseudocapacitance of MnO2 generates large capacitance for our synthesized nanocomposite. The MnO2/RGO/Ag nanocomposite (300 F g−1) exhibits higher capacitance performance than MnO2/Ag (70 F g−1) in 1 M Na2SO4 aqueous solution.Graphical Open image in new window

engineering, electrical & electronic,materials science, multidisciplinary,physics, applied
Carbon Quantum Dots Anchoring MnO2/graphene Aerogel Exhibits Excellent Performance As Electrode Materials for Supercapacitor

Haipeng Lv,Yue Yuan,Qunjie Xu,Haimei Liu,Yong-Gang Wang,Yongyao Xia

DOI: https://doi.org/10.1016/j.jpowsour.2018.07.059

IF: 9.2

2018-01-01

Journal of Power Sources

Abstract:Manganese oxides/graphene composite material has become regarded as a highly promising electrode material for high-performance supercapacitors. However, some shortages such as low bonding strength and poor stability are faced to solve. In this work, carbon quantum dots serve as the bridge for connecting MnO2 and graphene, which contribute to synthesize the stable MnO2/carbon quantum dots/graphene composite aerogel. Due to the connection function of CQDs the stable combinations are formed between MnO2 nanoparticles and graphene nanosheets. Subsequently, the composite aerogel as-fabricated has the three-dimensional net structure, indicating a large specific surface area and abundant electron transport pathways. The MnO2/CQDs/GA electrode exhibits excellent electrochemical performance as compared to those of MnO2/GA and MnO2/G that are synthesized without the addition of CQDs. This composite electrode displays high specific capacitance of 721 F g(-1) at 1 A g(-1), good rate capability of 89.2% capacitance retention at 20 A g(-1) and remarkable cycle stability of 92.3% capacitance retention after 10,000 at 10 A g(-1). Moreover, the MnO2/CQDs/GA is quite stable and has preeminent electrochemical performance, which demonstrates the great potential for the development of high-performance supercapacitors.
One-pot hydrothermal synthesis of Mn3O4/graphene nanocomposite for supercapacitors

Yafei Fan,Xudong Zhang,Yushan Liu,Qiang Cai,Jianmin Zhang

DOI: https://doi.org/10.1016/j.matlet.2012.12.110

IF: 3

2013-01-01

Materials Letters

Abstract:Mn3O4/graphene nanocomposite with the structure of Mn3O4 nanoparticles anchored on graphene sheets was synthesized using a facile in situ one-pot hydrothermal method. The growth of Mn3O4 nanoparticles and the reduction of graphene oxide occurred simultaneously during this hydrothermal process. Hexagonal flake-like Mn3O4 nanoparticles were found well-dispersed on graphene sheets. Cyclic voltammetry (CV), galvanostatic charge–discharge (GCD) and electrochemical impedance spectroscopy (EIS) measurements were used to assess the electrochemical properties of Mn3O4/graphene nanocomposite. The Mn3O4/graphene nanocomposite exhibited a specific capacitance of 171Fg−1 in 1M Na2SO4 aqueous electrolyte and a good rate property. The results showed that the Mn3O4/graphene nanocomposite could be used as electrode material for high performance supercapacitors.
MnO2/Carbon Composites for Supercapacitor: Synthesis and Electrochemical Performance

Dan Wu,Xiubo Xie,Yuping Zhang,Dongmei Zhang,Wei Du,Xiaoyu Zhang,Bing Wang

DOI: https://doi.org/10.3389/fmats.2020.00002

2020-02-11

Frontiers in Materials

Abstract:As an emerging energy storage device, the supercapacitor with high energy density, fast charging/discharging, and good cycle stability has aroused great interest. The performance of supercapacitors mainly depend on the electrode material. Manganese dioxide (MnO2) has emerged as one of the most promising electrode materials for high theoretical specific capacitance, wide potential range, high electrochemical activity, and environmental friendliness. However, its deteriorated volume expansion and inherently low conductivity limit its development and application in supercapacitors. To circumvent the mentioned issues, the porous, thin film, or layered composite materials were prepared to enhance the electrical conductivity and specific surface area of MnO2. Carbon materials are the ideal choice to compound with MnO2 owing to their low electrical resistance, significant thermal stability, large specific surface area, and porosity. Up to now, several kinds of MnO2/carbon composites as supercapacitor electrodes have been designed and fabricated. Herein, we give a concise review of the latest researches on MnO2/carbon supercapacitor electrodes, focusing on the fabrication strategies and analyzing the influencing factors of electrochemical performance of MnO2/carbon materials. An outlook on the possible development directions in future of designing high-performance MnO2/carbon materials for the current challenges is also provided.

materials science, multidisciplinary
Electrochemical properties of MnO2/activated carbon nanotube composite as an electrode material for supercapacitor

Jang Myoun Ko,Kwang Man Kim

DOI: https://doi.org/10.1016/j.matchemphys.2008.10.047

IF: 4.778

2009-04-01

Materials Chemistry and Physics

Abstract:Multi-walled carbon nanotubes (CNTs) were chemically activated using KOH in order to improve their specific surface area, electrical conductivity, and specific capacitance. Using such an activated CNT (A-CNT), a composite of MnO2/A-CNT was prepared by the coprecipitation method, and its physical and electrochemical properties were evaluated for use as an electrode material in supercapacitors. For comparison, a composite of MnO2/CNT was also prepared using an inactivated CNT and characterized in an aqueous solution of 1.0M Na2SO4. The specific capacitances of the MnO2/A-CNT composite electrode, measured using cyclic voltammetry at scan rates of 10 and 100mVs−1, were found to be 250 and 184Fg−1, respectively, compared to 215 and 138Fg−1, respectively, for the MnO2/CNT composite electrode. Because of CNT activation, the MnO2/A-CNT composite electrode showed an improved performance in both the capacitance and cycle performance, due to the alleviation of the accumulated stress during charge–discharge cycling.

materials science, multidisciplinary
Electrochemical Performance of Mn3O4/G/CB Composite Materials for Supercapacitors

Liquan Lu,Shengming Xu,Junwei An

DOI: https://doi.org/10.20964/2016.07.40

IF: 1.541

2016-01-01

International Journal of Electrochemical Science

Abstract:In this paper, a new type of supercapacitor electrode material is synthesized using graphene, carbon black and Mn3O4 (Mn3O4/G/CB). This composite material can make full use of the high conductivity of the graphene and the high specific surface area of the carbon black to improve the conductivity, specific capacitance and cycle stability of the Mn3O4. At 0.1A/g current density, the specific capacitance of the Mn3O4/G/CB composite is 661F/g, which is 4 times higher than that of Mn3O4 (165F/g) under the same current density. The CV curves of the Mn3O4/G/CB composite are maintained in the shape of an approximately rectangular shape, and have a fast current response rate. Under the high current density of 30A/g, after 5000 cycles of charge-discharge test, 69.2% of the initial specific capacitance is still retained for the Mn3O4/G/CB composite, while the specific capacitance of the Mn3O4 only remains 63.6%, after the same process. According to the EIS test, the charge transfer resistance and Warburg resistance of the Mn3O4/G/CB composites are all less than Mn3O4, which is attributed to the addition of the graphene and carbon black.
MnCo2S4 Nanoparticles Anchored to N- and S-codoped 3D Graphene As a Prominent Electrode for Asymmetric Supercapacitors

Hongfei Wang,Kefu Zhang,Yuqing Song,Jun Qiu,Juan Wu,Lifeng Yan

DOI: https://doi.org/10.1016/j.carbon.2019.02.035

IF: 10.9

2019-01-01

Carbon

Abstract:Binary composites MnCo2S4 nanoparticles are potential and attractive materials for supercapacitors. Here, we synthesis the MnCo2S4 nanoparticles anchored on both N and S co-doped 3D graphene composites via a facile two-step controlled sulfurization route. Thiourea contents shows strong effect on the nanostructures and electrochemical properties of the 3D composites. When adjusting the molar ratio of thiourea to Mn2+ as 48:1, the optimal composite electrode achieves a largest specific capacitance of 1324.3 F g(-1) at 1 A g(-1), with high conductivity, excellent rate performance and outstanding cyclic stability due to its unique structural advantages. Moreover, we fabricate an asymmetric supercapacitor with an operating voltage of 1.5 V using the composite and N, S co-doped graphene nanosheets as both electrodes and it delivers a high energy density of 62.9 Wh kg(-1) at a power density of 0.74 kWkg(-1), and 28.0 Wh kg(-1) at a power density of 1.80 kW kg(-1), which are higher than those of reported similar devices. These results prove that the design and optimization of MnCo2S4 and graphene composites is a method to achieve high performance supercapacitors. (c) 2019 Elsevier Ltd. All rights reserved.

The hydrolysis of pteroylpolyglutamates in the small intestine.

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Synthesis of the Graphene/Nickel Oxide Composite and Its Electrochemical Performance for Supercapacitors

Microwave-Assisted Synthesis of Graphene Oxide-MnO<sub>2</sub> Composites for Supercapacitors

Rapid Synthesis of Graphene/amorphous Α-Mno2 Composite with Enhanced Electrochemical Performance for Electrochemical Capacitor

Facile Synthesis of MnPO4·H2O Nanowire/Graphene Oxide Composite Material and Its Application as Electrode Material for High Performance Supercapacitors

Electrochemical performance of Mn3O4/graphene composite deposited on nickel foam as promising electrode material for supercapacitor application

Fast and Reversible Surface Redox Reaction of Graphene–mno2 Composites As Supercapacitor Electrodes

Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Manganese Oxide-Based Electrode Behavior As Materials for Electrochemical Supercapacitors

Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors

MnO2-graphene based composites for supercapacitors: Synthesis, performance and prospects

One-Pot Synthesis of MnO2/Reduced Graphene Oxide Via Hydrothermal Routes for Supercapacitor Applications

The Synthesis of Shape-Controlled Mno2/Graphene Composites Via A Facile One-Step Hydrothermal Method and Their Application in Supercapacitors

Electrochemical Deposition of MnO2/RGO Nanocomposite Thin Film: Enhanced Supercapacitor Behavior

Carbon Quantum Dots Anchoring MnO2/graphene Aerogel Exhibits Excellent Performance As Electrode Materials for Supercapacitor

One-pot hydrothermal synthesis of Mn3O4/graphene nanocomposite for supercapacitors

MnO2/Carbon Composites for Supercapacitor: Synthesis and Electrochemical Performance

Electrochemical properties of MnO2/activated carbon nanotube composite as an electrode material for supercapacitor

Electrochemical Performance of Mn3O4/G/CB Composite Materials for Supercapacitors

MnCo2S4 Nanoparticles Anchored to N- and S-codoped 3D Graphene As a Prominent Electrode for Asymmetric Supercapacitors