Abstract:A lattice temperature model is derived for oxide-confined vertical cavity surface emitting lasers (VCSELs) based on carrier transport and the conservation of energy. Peltier heat is caused by the bandedge and quasi-Fermi level discontinuities at a heterojunction. However, considering the device size, Peltier heat needs to be distributed and is not just generated at the interface, otherwise, an anomolous spike in temperature will occur. We have developed a novel treatment to model the Peltier heat at a heterojunction by use of a Monte Carlo simulation. Peltier heat is found to be a major heat contributor, and it results in a rapid and high temperature rise in the separate confinement heterostructure (SCH) region of the laser diode. We have also shown that the carrier thermal conductivities for materials with high mobilities must be included at high carrier densities because they contribute to additional spreading of the thermal energy. Subsequently, this lattice temperature model is coupled self-consistently to electronic and optical solvers to form a complete simulator for VCSELs. Self-heating causes a fast temperature rise when the VCSEL is operated under continuous wave conditions, causing resonant wavelength changes and an eventual thermal rollover. The resonant wavelength shift has been shown to be caused mainly by the heating of the distributed Bragg reflectors even though the peak temperature occurs within the SCH region. Possible physical factors causing the thermal rollover have also been examined with our complete simulator. The Auger recombination process is found to be one of the main factors causing the thermal rollover in 980 nm oxide-confined VCSELs while the photon lifetime is a factor in determining the position of the thermal rollover. We have also achieved a very good match between our simulated results and experimental data.

An Analytical Model of Organic Light Emitting Diodes Including the Temperature Effects

Modeling Current–Voltage Characteristics of Bilayer Organic Light-Emitting Diodes

A Comprehensive Multiphysics Model for Organic Photovoltaics

Thermal Analysis of Organic Light Emitting Diodes Based on Basic Heat Transfer Theory

Effects of Organic/Organic Interface on Recombination Efficiency in Double-Layer Organic Diodes

Analytic current-voltage relationship based on the unified mobility model for organic diodes

Heat Exchange of Organic Light Emitting Devices

Lattice Temperature Model and Temperature Effects in Oxide-Confined VCSEL’s

A Thermal Analysis of the Operation of Microscale, Inorganic Light-Emitting Diodes

Current density–voltage characteristics of exciplex-type organic light-emitting diodes expressed by a simple analytic equation

P-Type Thin Film Transistor-Like Effects in Organic Light-Emitting Diodes Array: the Origin of Lateral Leakage

Current Model for Organic Diodes at Different Temperatures: Comparison With Universal Curve Equation

Thermal Management for Microscale Inorganic Light-Emitting Diodes

Thermal Properties of Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation

Optical design of organic light emitting diodes

Efficient and Rigorous Modeling of Light Emission in Planar Multilayer Organic Light-Emitting Diodes

Real-Time Observation Of Temperature Rise And Thermal Breakdown Processes In Organic Leds Using An Ir Imaging And Analysis System

Analytical investigations on the thermal properties of microscale inorganic light-emitting diodes on an orthotropic substrate

Impact of thermal transport parameters on the operating temperature of OLEDs

Analytical Model of Thermal Field in Polymer Thermo-Optic Devices

3D Thermal Analysis of Rectangular Microscale Inorganic Light-Emitting Diodes in a Pulsed Operation