Abstract:We propose three-dimensional (3D) polymer directional couplers operating at 1550 nm for on-board optical interconnects. The proposed directional coupler can realize free-position light coupling and splitting in three dimension and can be cascaded to serve as an effective and scalable device for multi-layer and multi-channel interconnects. The 3D directional coupler was fabricated with commercially available UV-curable epoxies by combining the use of a needle-type liquid micro-dispenser and a 3-axis robot stage. The main parameters of the 3D directional coupler such as the interaction length, coupling ratio, coupling position, and cascade numbers can be easily adjusted. In the experiment, single-mode two-dimensional (2D) polymer directional couplers in both horizontal and vertical directions operating at 1550 nm with different coupling ratios (CRs) were demonstrated at first. The experimental results agree with the simulated ones. A 3D directional coupler with coupling ratios of 58:23:19 at 1550 nm was then successfully fabricated using the mosquito method for the first time to the best of our knowledge. The CR varies with the wavelength as expected while the excess loss remains almost the same within C-band. The results imply that the proposed method may be applicable in the fabrication of functional devices in three dimension for high-density on-board optical interconnects with further improvement on fabrication process.

Two- and three-dimensional polymer directional coupler for high-density optical interconnects at 1550 nm

3D Polymer Directional Coupler for On-Board Optical Interconnects at 1550 Nm.

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

High-efficiency Grating Coupler Based on Fast Directional Optimization and Robust Layout Strategy in 130 Nm CMOS Process.

Directly Inscribed Multimode Polymer Waveguide and 3D Device for High-Speed and High-Density Optical Interconnects

Efficient Directional Coupler Based on Plasmonic Waveguide for Photonic Integrated Circuits

Single-mode Polymer Waveguides and Devices for High-Speed On-Board Optical Interconnect Application

Circular-core Single-Mode Polymer Waveguide for High-Density and High-Speed Optical Interconnects Application at 1550 Nm

Compact, lightweight and wideband directional waveguide coupler implemented with 3D direct-metal-laser-sintering technique

Experimental Demonstration of Ultra-Compact Directional Couplers Based on Silicon Hybrid Plasmonic Waveguides

Horizontal Directional Coupler Formed with Waveguides of Different Heights for Mode-Division Multiplexing

Single-to-four Core Optical Fiber Coupling Using a Two-photon Polymerization Produced Waveguide

Efficient Polymer Waveguide Grating Coupler with Directionality Enhancement

Optimal Design of 850nm 2 × 2 Multimode Interference Polymer Waveguide Coupler by Imprint Technique

An asymmetric non-uniform 3-dB directional coupler with 300-nm bandwidth

Single-mode polymer waveguide with circular core operating at 1550 nm for high-density and highspeed optical interconnect applications

Design and Fabrication of Three-Dimensional Polymer Mode Multiplexer Based on Asymmetric Waveguide Couplers

Design and Fabrication of Broadband Polymer Mode (de)multiplexer Using a Direct Inscribing Method

High-Performance 2 × 2 Bent Directional Couplers Designed with an Efficient Semi-Inverse Design Method

Asymmetric, non-uniform 3-dB directional coupler with 300-nm bandwidth and a small footprint

A Novel Design of 2-D Photonic Crystal Directional Coupler With High Extinction Ratio and Short Coupling Length