A Computational Correction Method for Dual-comb Interferometry

Zebin Zhu,Kai Ni,Qian Zhou,Guanhao Wu

DOI: https://doi.org/10.1364/cleo_at.2018.jw2a.160

2018-01-01

Abstract:We present a post-correction algorithm for dual-comb interferometry that can compensate the carrier phase noise and timing jitter of interferograms. One-hertz linewidth, ~1 ns timing jitter, and 0.4 rad precision of carrier phase are demonstrated.

What problem does this paper attempt to address?

Digital Correction Method for Realizing a Phase-Stable Dual-Comb Interferometer

Zebin Zhu,Kai Ni,Qian Zhou,Guanhao Wu

DOI: https://doi.org/10.1364/oe.26.016813

IF: 3.8

2018-01-01

Optics Express

Abstract:A phase-stable dual-comb interferometer measures materials' broadband optical response functions, including amplitude, frequency, and phase, making it a powerful tool for optical metrology. Normally, the phase-stable dual-comb interferometer is realized via tight phase-locking methods. This paper presents a post-correction algorithm that can compensate for carrier wave phase noise and interferogram timing jitter. The compensating signal is a beat between two combs using a free-running continuous wave laser as an optical intermediary. In our experiment, sub-hertz relative linewidth, ~1 ns relative timing jitter, and 0.2 rad precision in the carrier phase is demonstrated.
A Self-referencing Digital Error Correction Method for Dual-comb Interferometer

Haoyang Yu,Kai Ni,Qian Zhou,Xinghui Li,Xiaohao Wang,Guanhao Wu

DOI: https://doi.org/10.1364/CLEO_AT.2020.JTU2G.1

2020-01-01

Abstract:We present a self-referencing digital error correction method for dual-comb interferometry. Fully mutual coherence of a dual-comb interferometer is reconstructed and 1 Hz theoretical linewidth in 1 second acquisition time is achieved. (C) 2020 The Author(s)
Digital Error Correction of Dual-Comb Interferometer Without External Optical Referencing Information.

Haoyang Yu,Kai Ni,Qian Zhou,Xinghui Li,Xiaohao Wang,Guanhao Wu

DOI: https://doi.org/10.1364/oe.27.029425

IF: 3.8

2019-01-01

Optics Express

Abstract:Long-term mutual coherence is a key factor that affects the signal-to-noise ratio and resolution of a dual-comb interferometer. To realize a phase-stable dual-comb interferometer configuration, tightly phase-locked loop systems or digital error correction methods with external optical reference are commonly used. This paper presents a self-referencing digital error correction method based on the short-term spectral characteristics of interferograms to reduce the cost and complexity of the phase-stable dual-comb interferometer configuration. In our experiment, fully mutual coherence of a dual-comb interferometer is reconstructed and 1 Hz theoretical linewidth in 1 s acquisition time is achieved by digitally compensating for time jitter, center frequency jitter, and carrier-envelope-phase jitter, offering an effective technique for advanced dual-comb applications.
Continuous Jitter Reconstruction of Dual-comb Interferometer for Self-Referencing Error Correction

Haoyang Yu,Kai Ni,Qian Zhou,Xinghui Li,Xiaohao Wang,Guanhao Wu

DOI: https://doi.org/10.1364/cleopr.2020.c5b_2

2020-01-01

Abstract:We present a continuous jitter reconstruction method for self-referencing error correction of dual-comb interferometry. By utilizing specific interpolation and unwrap algorithm, continuous time jitter and phase jitter are correctly recovered from the simulated interferograms.
Mode-resolved dual-comb spectroscopy using error correction based on single optical intermedium

Haoyang Yu,Qian Zhou,Xinghui Li,Xiaohao Wang,Kai Ni

DOI: https://doi.org/10.1364/OE.418099

IF: 3.8

2021-01-01

Optics Express

Abstract:Dual-comb spectroscopy (DCS) is an emerging and promising spectrometric technique with high resolution, high sensitivity, broad spectral range, and fast acquisition speed. For the recovery of the information encoded on comb modes without resolution loss, two continuous wave lasers are commonly utilized as optical intermedia to track the real-time jitter of dual-comb interferograms. This paper presents a simplified error correction method based on single optical intermedium for quasi-free-running fiber DCS. This method combines the strengths of conventional optical referencing and self-referencing error correction. We acquired whole P branch (HCN)-C-13-N-14 transmittance spectra in the near infrared as a demonstration. In contrast to that of conventional dual intermedium error correction, the standard deviation of our method was merely 0.01 over the 4 THz spectral range. Our method provides a balanced and practical postprocessing routine for high-performance mode-resolved DCS applications. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Improving the accuracy of a dual-comb interferometer by suppressing the relative linewidth

Zhu Zebin,Xu Guangyao,Ni Kai,Zhou Qian,Wu Guanhao

DOI: https://doi.org/10.1088/1361-6501/aaa50b

IF: 2.398

2018-01-01

Measurement Science and Technology

Abstract:We present a compact system of synchronization for two fiber-based optical frequency comb lasers. We use a free- running continuous wave laser as an intermediary to obtain the relative noise of two combs and employ an intra-cavity electro-optic modulator (EOM) to achieve active phase feedback for fast synchronization. The EOM bandwidth is 150 kHz and the relative linewidth is suppressed markedly from 300 kHz to sub-hertz values. The relative effective timing jitter of the two pulse trains is also decreased from 680 fs to 25 fs. The proposed method shows promise for developing a high-performance, low-cost, fiber-based dual-comb interferometer for ranging or spectroscopy.
Fine Correction Of Nonlinearity In Homodyne Interferometry

PengCheng Hu,Florian Pollinger,Meiners Hagen Karl,Hong Xing Yang,Abou Zeid Ahmed

DOI: https://doi.org/10.1117/12.885392

2010-01-01

Abstract:In a typical homodyne interferometer with 4-channel detectors, the nonlinearity resulting from beam power drifting couldn't be thoroughly suppressed by Heydemann correction. This study presents an analysis of the nonlinearity resulting from beam power drifting. From a theoretical approach, the nonlinearity model before and after conventional Heydemann correction is built. And a fine correction method involving Heydemann correction with partial data is introduced. The experimental results indicate that, the proposed method suppresses the nonlinearity in a homodyne interferometer to 0.18 nm, which would be 1.49 nm with conventional Heydemann correction.
A Fast Reference-less Error Correction Method for Dual-comb Spectroscopy Based on Free-running Fiber Lasers

Qiuying Ma,Pengpeng Zhang,Haoyang Yu,Xiaohao Wang,Xiaojun Liang,Kai Ni

DOI: https://doi.org/10.1364/cleo_at.2024.jth2a.167

2024-01-01

Abstract:A fast reference-less error correction method based on truncating and zeroing and cross-correlation for suppressing complex noises in the dual-comb spectroscopy was proposed. The experimental results demonstrated that the coherent averaging results of the dual-reference digital error correction using 6.4 s interferograms was achieved with only 0.2 s signal.
Synthetic-wavelength-based Dual-Comb Interferometry for Fast and Precise Absolute Distance Measurement

Zebin Zhu,Guangyao Xu,Kai Ni,Qian Zhou,Guanhao Wu

DOI: https://doi.org/10.1364/oe.26.005747

IF: 3.8

2018-01-01

Optics Express

Abstract:We present an absolute distance measurement system using a phase-stable dual-comb system with 56.09 MHz repetition rate and 2 kHz repetition rate difference. A relative phase stability of 0.1 rad in 0.5 ms between two combs is achieved using a mutual locking scheme. The dual-comb ranging system combines the time-of-flight (TOF) method, synthetic-wavelength interferometry (SWI), and carrier wave interferometry (CWI). Each method provides a particular ambiguity range and resolution, and they can be applied simultaneously and linked to enhance the precision and measurement rate of the ranging system. The experimental results demonstrate that a precision of 1.2 μm is obtained without time averaging, and the precision can be improved to 3 nm with only 10 ms averaging time using the SWI method described in this study. The precision reaches a sub-nanometer when the averaging time exceeds 0.1 s. A system with high accuracy and short averaging time would enhance fast measurement performance in various industrial applications. The ambiguity range is about 2.67 m in our system, we test the performance of the system with 1.5 mm range at 1.5 m distance.
Dual-comb correction with spectrally broadened fiber lasers

Philippe Guay,Alex Tourigny-Plante,Nicolas Bourbeau Hébert,Vincent Michaud-Belleau,Steeve Larouche,Khaoula Fdil,Jérôme Genest

DOI: https://doi.org/10.48550/arXiv.1909.09715

2019-09-21

Abstract:The phase information provided by the beat note between frequency combs and two continuous-wave lasers is used to extrapolate the phase evolution of comb modes found in a spectral region obtained via nonlinear broadening. This thereafter enables using interferogram self-correction to fully retrieve the coherence of a dual-comb beat note between two independent fiber lasers. This approach allows to forego the $f - 2f$ self-referencing of both combs, which is a significant simplification. Broadband near-infrared methane spectroscopy has been conducted as a demonstration of the simplified system's preserved performance.

Optics,Instrumentation and Detectors
A simulation method for dual-comb spectroscopy with jitter noise

Yu Haoyang,Ni Kai,Zhou Qian,Li Xinghui,Wu Guanhao

DOI: https://doi.org/10.1117/12.2500976

2019-01-01

Abstract:Dual-comb spectroscopy is an emerging spectral detection technology with high resolution, high sensitivity, broad bandwidth and fast detection speed. By using a pair of coherent optical frequency combs, asynchronous light sampling is realized and pico-scale theoretical resolution can be achieved without mechanical scanning components. However, coherence between dual combs suffers from the frequency jitter, which causes distortion of spectral information. Furthermore, since jitter noise components in the experiment are complex, widely sourced, and difficult to control. It is impractical to study the effects of a specific jitter noise and observe how jitter correction algorithm works through an actual dual-comb spectroscopy experimental system. To solve this problem, a simulation method is proposed for dual-comb spectroscopy with jitter noise to verify the effectiveness of data processing algorithm. Two Gaussian random jitter sequence with a standard deviation of 0.16fs are generated as time jitter for dual-comb spectroscopy simulation system. The simulation results show that the time jitter causes the calculated spectral center wavelength d. to have a random jitter of standard deviation of similar to 40GHz. The time-domain averaging method and the frequency-domain averaging method are applied to the data obtained from the simulation system. Through 100 time-domain averaging, there is no visible compensation effect on the deviation of calculated spectral center wavelength, and the SNR becomes worse as the average number increases. On the contrary, 100 frequency-domain averaging reduces the standard deviation of the spectral center wavelength deviation to similar to 2.6GHz and can obtain 10 times the SNR of 100 time-domain averaging.
Improving Resolution of Dual-Comb Gas Detection Using Periodic Spectrum Alignment Method.

Haoyang Yu,Qian Zhou,Xinghui Li,Xiaohao Wang,Xilin Wang,Kai Ni

DOI: https://doi.org/10.3390/s21030903

2021-01-01

Abstract:Dual-comb spectroscopy has been an infusive spectroscopic tool for gas detection due to its high resolution, high sensitivity, and fast acquisition speed over a broad spectral range without any mechanical scanning components. However, the complexity and cost of high-performance dual-comb spectroscopy are still high for field-deployed applications. To solve this problem, we propose a simple frequency domain post-processing method by extracting the accurate position of a specific absorption line frame by frame. After aligning real-time spectra and averaging for one second, the absorbance spectrum of H13C14N gas in the near-infrared is obtained over 1.1 THz spectral range. By using this method, the standard deviation of residual error is only ~0.002, showing great agreement with the conventional correction method. In addition, the spectral resolution is improved from 13.4 GHz to 4.3 GHz compared to direct spectrum averaging. Our method does not require a specially designed common-mode suppression comb, rigorous frequency control system, or complicated computational algorithm, providing a cost-effective scheme for field-deployed Doppler-limited spectroscopy applications.
Synthetic-Wavelength-Based Dual-Comb Interferometry for High-Speed and High-Precision Distance Measurement

Zebin Zhu,Kai Ni,Qian Zhou,Guanhao Wu

DOI: https://doi.org/10.1364/cleo_at.2018.atu3i.4

2018-01-01

Abstract:We propose a dual-comb ranging system based on synthetic-wavelength interferometry. It can realize absolute distance measurement with 2.7m ambiguity range, 3nm precision within 10ms averaging time.
Correction Algorithm of Doppler Effect on the Comb-Based FSO-TWTFT for Satellite Application

Long Wang,Wenhai Jiao,Liang Hu,Jianping Chen,Guiling Wu

DOI: https://doi.org/10.1109/eftf/ifcs57587.2023.10272140

2023-01-01

Abstract:SummaryWe further analyze the Doppler effect caused by high-velocity platform motion for the comb-based free-space optical two-way time-frequency transfer technique. A novel synchronization algorithm is proposed to correct the Doppler-induced error.
Strategies of precision enhancement for dual-comb time-of-flight distance measurement with nonlinear detection by numerical simulation

Yang Liu,Wenze Xia,Mingzhao He,Shiying Cao,Weilei Yang,Dongjing Miao,Jianshuang Li

DOI: https://doi.org/10.1117/12.2606092

2021-11-24

Abstract:High-precision and long-range absolute distance measurement is a vitally important topic in large-scale metrology, and it has broadened applications in the manufacturing industry. Especially, the dual-comb time-of-flight distance measurement is a promising method combining with the advantages of fast speed and high accuracy. The measurand would be determined by asynchronous optical sampling (ASOPS) methods with a slight difference in repetition rates. Here, the home-built optical platform of the Er-fiber femtosecond frequency combs would be introduced with a repetition rate of around 200 MHz and carrier-envelope offset frequency of 20 MHz. Besides, the strategies of precision enhancement for dual-comb time-of-flight distance measurement with nonlinear intensity detection are discussed by the numerical simulation. The sampling interval could be optimized by choosing a proper range of repetition rate and difference of repetition rates. A fine curve fitting method is also proposed for further precision improvement. The results of numerical simulation would provide a valuable reference for the experimental process.
Computationally image-corrected dual-comb microscopy with a free-running single-cavity dual-comb fiber laser

Takahiko Mizuno,Yoshiaki Nakajima,Yuya Hata,Takuya Tsuda,Akifumi Asahara,Takashi Kato,Takeo Minamikawa,Takeshi Yasui,Kaoru Minoshima

DOI: https://doi.org/10.1364/OE.415242

2021-02-15

Abstract:Dual-comb microscopy (DCM), an interesting imaging modality based on the optical-frequency-comb (OFC) mode and image pixel one-to-one correspondence, benefits from scan-less full-field imaging and simultaneous confocal amplitude and phase imaging. However, the two fully frequency-stabilized OFC sources requirement hampers DCM practicality due to the complexity and costs. Here, a bidirectional single-cavity dual-comb fiber laser (SCDCFL) is adopted as a DCM low-complexity OFC source. Although the residual timing jitter in the SCDCFL blurs the image of a static object acquired by DCM, computational image correction significantly suppresses the image blur. Nanometer-order step surface profilometry with a 14.0 nm uncertainty highlights the computationally image-corrected DCM effectiveness. We further discuss a possibility to expand the computational image correction to a dynamic object and demonstrate its preliminary experiment. The proposed method enhances the DCM generality and practicality due to low-complexity OFC source.
A dual-stage correction approach for high-precision phase-shifter in Fizeau interferometers

Tao Xu,Ziqi Wang,Zhiwei Jia,Jian Chen,ZhiHua Feng

DOI: https://doi.org/10.1016/j.optlaseng.2024.108205

IF: 5.666

2024-03-29

Optics and Lasers in Engineering

Abstract:This paper proposes a dual-stage correction approach for a high-accuracy phase-shifter in Fizeau laser interferometers, effectively reducing the phase shift errors in PSI (Phase-Shifting interferometry) and improving the precision of surface profile measurements. The precision of PSI depends on the displacement accuracy of the reference mirror, and the function of the phase shifter is to drive the reference mirror to generate wavelength-level displacements with nanometer-level accuracy. The first-stage correction aims to reduce the nonlinearity error of the reference mirror by ULPS (Ultra-High Linearity Phase Shifter). The second-stage correction aims to reduce the average velocity error and plane velocity uniformity error of the reference mirror by AVIC (Auto Velocity Iterative Correction). The experimental results indicate that, after the first-stage correction, ULPS exhibits a 0.05 % nonlinearity, a 2.5 nm repeatability, and a 0.2 nm resolution under a load of 20 kg, and its nonlinearity surpassing all phase-shifters documented in the literature. After the second-stage correction, the average velocity error and plane velocity uniformity error of the reference mirror are reduced to 0.07 %.

optics
Reducing the quantization error and miscount error in two-color interferometers by combining a coefficient compensation technique with a fringe-count averaging technique

Lijiang Zeng,Satoshi Hatano,Yongchol Lee,Hirokazu Matsumoto,Katuo Seta,Shigeo Iwasaki

DOI: https://doi.org/10.1016/S0030-4018(00)00509-5

IF: 2.4

2000-01-01

Optics Communications

Abstract:A method was developed to compensate for the quantization error and miscount error in two-color length-measuring interferometers by developing a coefficient compensation technique, and then combining this technique with a previously developed fringe-count averaging technique. For a length of 1 m, the measurement accuracy of the refractive index of air was improved to 3×10−7 by processing experimental data by using the coefficient compensation method, and to 1×10−7 by processing simulation data using the combined technique of coefficient compensation and fringe-count averaging.
Real-Time Correction of Nonlinearity Error in Homodyne Phase-Locking Interferometer

S. Lu,K. M. Yang,Y. Zhu,L. J. Wang,M. Zhang

DOI: https://doi.org/10.1115/imece2017-70914

2018-01-01

Abstract:Scanning beam interference lithography (SBIL) technology is applied to produce large-area grating with nanoscale phase accuracy. One of the greatest challenges of SBIL is locking interference fringe to a moving substrate with nanometer spatial phase error, which requires measuring the fringe phase with subnanometer precision. We are developing a novel homodyne phase-locking interferometer (HPLI) to meet the harsh measurement requirements. The HPLI offers high precision phase measurements as well as the direction recognition of the interference fringe drift with a four-orthogonal detection system. However, nonlinearity error impacts the phase measurement accuracy of HPLI with nanometer scale, which is mainly due to polarization mixing. In this paper, we present a method to estimate and compensate nonlinearity error in real time by applying an extended Kalman filter algorithm. The simulation results show that the method can effectively eliminate the nonlinearity error.
Real-time Compensation of Nonlinearity in Heterodyne Interferometers Based on Quadrature Demodulation and Extremum Operation

Haijin Fu,Yue Wang,Pengcheng Hu,Hongxing Yang,Ruitao Yang,Xu Xing,Jiubin Tan

DOI: https://doi.org/10.1117/1.oe.59.4.044101

IF: 1.3

2020-01-01

Optical Engineering

Abstract:The existing compensation methods for nonlinearity in heterodyne interferometers tend to be time-consuming, which limits their application in real time. To solve this problem, a real-time compensation method is proposed. First, dual-channel quadrature demodulation is used to transform the error signals in interference signals into the traditional three errors (direct current offsets, unequal amplitude errors, and phase nonorthogonal errors) in the demodulated signals. Second, the three errors are dynamically corrected by a simple algorithm based on the extremums extracted from the demodulated signals. To verify the effectiveness of the proposed method, experiments employing the proposed method were carried out to process simulated signals and to conduct actual displacement measurements. The results demonstrate that the nonlinearity in the heterodyne interferometer can be reduced down to a subnanometer level. (C) 2020 Society of Photo-Optical Instrumentation Engineers (SPIE)

A Computational Correction Method for Dual-comb Interferometry

Digital Correction Method for Realizing a Phase-Stable Dual-Comb Interferometer

A Self-referencing Digital Error Correction Method for Dual-comb Interferometer

Digital Error Correction of Dual-Comb Interferometer Without External Optical Referencing Information.

Continuous Jitter Reconstruction of Dual-comb Interferometer for Self-Referencing Error Correction

Mode-resolved dual-comb spectroscopy using error correction based on single optical intermedium

Improving the accuracy of a dual-comb interferometer by suppressing the relative linewidth

Fine Correction Of Nonlinearity In Homodyne Interferometry

A Fast Reference-less Error Correction Method for Dual-comb Spectroscopy Based on Free-running Fiber Lasers

Synthetic-wavelength-based Dual-Comb Interferometry for Fast and Precise Absolute Distance Measurement

Dual-comb correction with spectrally broadened fiber lasers

A simulation method for dual-comb spectroscopy with jitter noise

Improving Resolution of Dual-Comb Gas Detection Using Periodic Spectrum Alignment Method.

Synthetic-Wavelength-Based Dual-Comb Interferometry for High-Speed and High-Precision Distance Measurement

Correction Algorithm of Doppler Effect on the Comb-Based FSO-TWTFT for Satellite Application

Strategies of precision enhancement for dual-comb time-of-flight distance measurement with nonlinear detection by numerical simulation

Computationally image-corrected dual-comb microscopy with a free-running single-cavity dual-comb fiber laser

A dual-stage correction approach for high-precision phase-shifter in Fizeau interferometers

Reducing the quantization error and miscount error in two-color interferometers by combining a coefficient compensation technique with a fringe-count averaging technique

Real-Time Correction of Nonlinearity Error in Homodyne Phase-Locking Interferometer

Real-time Compensation of Nonlinearity in Heterodyne Interferometers Based on Quadrature Demodulation and Extremum Operation