Abstract:Polyurethane (PU) has been widely used for the biomedical applications but its potential for bone regeneration is limited due to its lack of osteoconductive properties. Strontium substituted hydroxyapatite (SrHA) particles, on the other hand, are known to exhibit a positive effect on bone formation. Therefore, the aim of this study was to (i) develop porous polyurethane scaffolds containing strontium SrHA nanoparticles (PU/SrHA) and (ii) compare their in vitro biological performance for applications in bone regeneration to PU scaffolds. SrHA and HA was synthesized using a conventional wet-chemical neutralization reaction at temperatures of 25, 50, and 80 degrees C. Chemical analysis was performed by inductively coupled plasma-optical emission spectrometry. Synthesizing temperatures at 25 and at 50 degrees C were selected for the composite preparation (abbreviated as HA-25, SrHA-25, HA-50, and SrHA-50, respectively). PU was synthesized from isophorone diisocyanate, polytetramethylene ether glycol, and 1,4-butanediol. Composite scaffolds were prepared by addition of HA or SrHA nanoparticles into PU scaffolds during polymer preparation. The results showed that the Sr content in HA nanoparticles increased with increasing synthesis temperature. The addition of nanoparticles decreased the elongation-at-break and tensile strength, but significantly increased the surface wettability of the PU scaffolds. In vitro degradation tests demonstrated that release of cations was significantly higher from PU/SrHA-50 composite scaffolds. Cell culture tests indicated that PU composites containing either HA or SrHA nanoparticles increased proliferation of bone marrow stem cells as compared to plain PU scaffolds, whereas osteogenic differentiation was not affected by the incorporation of HA nanoparticles irrespective of the incorporation of Sr. (c) 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 103A: 1930-1939, 2015.

Porous 3-D Thermoplastic Polyurethane (TPU) Scaffold Modified with Hydroxyapatite (HA) Nanoparticles Using an Ultrasonic Method

Morphology, mechanical properties, and mineralization of rigid thermoplastic polyurethane/hydroxyapatite scaffolds for bone tissue applications: effects of fabrication approaches and hydroxyapatite size

Ultrasonication‐Induced Modification of Hydroxyapatite Nanoparticles Onto a 3D Porous Poly(lactic Acid) Scaffold with Improved Mechanical Properties and Biocompatibility

Porous bioactive scaffold of aliphatic polyurethane and hydroxyapatite for tissue regeneration.

Modification of 3-D Porous Hydroxyapatite/Thermoplastic Polyurethane Composite Scaffolds for Reinforcing Interfacial Adhesion by Polydopamine Surface Coating

Hydroxyapatite/Polyurethane Scaffolds for Bone Tissue Engineering.

Degradation and biocompatibility of porous nano-hydroxyapatite/polyurethane composite scaffold for bone tissue engineering

Preparation and Characterization of Aliphatic Polyurethane and Hydroxyapatite Composite Scaffold

Effect of hydroxyapatite fillers on the mechanical properties and osteogenesis capacity of bio-based polyurethane composite scaffolds

Biological Evaluation of Porous Aliphatic Polyurethane/hydroxyapatite Composite Scaffolds for Bone Tissue Engineering.

Surface Modification of Electrospun TPU Nanofiber Scaffold with CNF Particles by Ultrasound‐Assisted Technique for Tissue Engineering

Preparation and Characterization of Porous Hydroxyapatite/β-Cyclodextrin-based Polyurethane Composite Scaffolds for Bone Tissue Engineering

Development of Porous Polyurethane/Strontium-Substituted Hydroxyapatite Composites for Bone Regeneration

3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration

Fabrication of Poly(lactide‐co‐glycolide) Scaffold Embedded Spatially with Hydroxyapatite Particles on Pore Walls for Bone Tissue Engineering

Preparation and Biological Evaluation of Porous Tantalum Scaffolds Coated with Hydroxyapatite

Polydopamine-Templated Hydroxyapatite Reinforced Polycaprolactone Composite Nanofibers with Enhanced Cytocompatibility and Osteogenesis for Bone Tissue Engineering

Preparation and Properties of Aliphatic Polyurethane/hydroxyapatite Composites by in Situ Polymerization

Structure and Properties of Poly(a-hydroxyl acids)/Nano Hydroxyapatite Composite Scaffolds

The effect of hydroxyapatite nanoparticles on mechanical behavior and biological performance of porous shape memory polyurethane scaffolds

Cellulose nano-dispersions enhanced by ultrasound assisted chemical modification drive osteoblast proliferation and differentiation in PVA/HA bone tissue engineering scaffolds