Abstract:In this letter, a novel high step-up dc-dc converter with an active coupled-inductor network is presented for a sustainable energy system. The proposed converter contains two coupled inductors which can be integrated into one magnetic core and two switches. The primary sides of coupled inductors are charged in parallel by the input source, and both the coupled inductors are discharged in series with the input source to achieve the high step-up voltage gain with appropriate duty ratio, respectively. In addition, the passive lossless clamped circuit not only recycles leakage energies of the coupled inductor to improve efficiency but also alleviates large voltage spike to limit the voltage stresses of the main switches. The reverse-recovery problem of the output diode is also alleviated by the leakage inductor and the lower part count is needed; therefore, the power conversion efficiency can be further upgraded. This letter shows the key waveforms of the proposed converter and the detailed derivation of the steady-state operation principle. The voltage conversion ratio, the effect of the leakage inductance and the parasitic parameters on the voltage gain are discussed. The voltage stress and current stress on the power devices are illustrated and the comparisons between the proposed converter and other converters are given. Finally, a prototype circuit rated 200-W output power is implemented in the laboratory, and the experimental results show the satisfactory agreement with the theoretical analysis.

A Non-Isolated High Step-Up Hybrid Resonant Converter Based on Hybrid Transformer

Improved High Step-Up Dc-Dc Converter Based on Active Clamp Coupled Inductor with Voltage Double Cells

An Isolated High Step-Up Converter Based on the Active Secondary-Side Quasi-Resonant Loops

Performance Analysis of Single Phase High Step-Up Converter with Coupled Inductor Multiplier

A High Efficiency High Power Step-Up Resonant Switched-Capacitor Converter for Offshore Wind Energy Systems

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

A non-isolated high step-up converter with built-in transformer derived from its isolated counterpart

A novel current-feed soft-switching two-switch forward resonant DC-DC Transformer (DCX)

High Step-Up/Down Switched-Capacitor Based Bidirectional DC-DC Converter

High Step-Up Boost Converter with Passive Lossless Clamp Circuit for Non-Isolated High Step-Up Applications

Analysis and design of a high efficiency current fed multi-resonant converter for high step-up power conversion in renewable energy harvesting

Hybrid Transformerless PV Converters with Low Leakage Currents: Analysis and Configuration

High-Gain Symmetrical Z-Source Hybrid Converter with Low Leakage Currents

Novel High Step-Up DC–DC Converter with an Active Coupled-Inductor Network for a Sustainable Energy System

Zero-voltage Transition Interleaved High Step-Up Converter with Built-in Transformer

A Novel High Step-up Converter with a Quasi-active Switched-Inductor Structure for Renewable Energy Systems

High Step-Up Boost Converter with Coupled Inductor and Switched Capacitor

A Single-Switch Trans-Inverse High Step-Up Semi-Quadratic DC-DC Converter Based on Three-Winding Coupled-Inductor

A High Step-Up Current Fed Multi-Resonant Converter with Output Voltage Doubler