Abstract:Zerovalent iron (ZVI) is commonly used for water treatment under aerobic conditions such as sequestration of metals. Sulfide-modified ZVI (S-ZVI) is attracting increasing attention for its easy preparation and high reactivity with environmental pollutants. The processes responsible for contaminant removal can be a complex mixture of redox, sorption, and coprecipitation processes. In this paper, ZVI and S-ZVI were used to sequester antimonite (Sb(III)). The rates of Sb(III) sequestration were determined in open, well-mixed, batch reactors. The effects of various experimental variables were investigated, including pH, iron dose, initial concentrations of Sb(III), aging time of the ZVI and S-ZVI, addition of Fe2+, mixing rate, etc. The results showed that S-ZVI can significantly enhance the Sb(III) sequestration, and under basic conditions in this study, the k obs (0.018 min−1) obtained in the S-ZVI system was approximately 15 times higher than the 0.0012 min−1 obtained in the ZVI system. Solid phase characterizations were conducted to assess the influence of sulfidation on the morphology and surface geochemistry of ZVI. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) confirmed the presence of sulfur. X-ray photoelectron spectroscopy (XPS) indicated the oxidation of Sb(III) to Sb(V) and adsorption and coprecipitation onto the iron oxides is the mainly sequestration process. The FeS layer on ZVI is more conductive than oxides and therefore accelerates electron transfer. In addition sulfidation promotes the corrosion of iron and the formation of ferrous iron, which further enhances the ferric iron oxide formation, thereby favoring adsorption and oxidation of Sb(III).

Selenate Removal by Fe0 Coupled with Ferrous Iron, Hydrogen Peroxide, Sulfidation, and Weak Magnetic Field: A Comparative Study.

Coupled Effect of Ferrous Ion and Oxygen on the Electron Selectivity of Zerovalent Iron for Selenate Sequestration.

Removal of Selenate from Water by Zerovalent Iron

Enhanced removal of Se(VI) from water via pre-corrosion of zero-valent iron using H2O2/HCl: Effect of solution chemistry and mechanism investigation.

Enhanced Removal of Selenate from Mining Effluent by H2O2/HCl-pretreated Zero-Valent Iron.

Simultaneous Removal of Selenite and Selenate by Nanosized Zerovalent Iron in Anoxic Systems: The Overlooked Role of Selenite

Facilitating Se(VI) adsorption and electron transfer by introducing αFeOOH to sulfidated zero-valent iron

Highly e ffi cient removal of selenite by electrolysis-assisted nano-zerovalent iron (nZVI): Implication for corrosion and reduction

Sulfide-modified zerovalent iron for enhanced antimonite sequestration: Characterization, performance, and reaction mechanisms

Resolve the species-specific effects of iron (hydr)oxides on the performance of underlying zerovalent iron for metalloid removal: Identification of their key properties

Zero-valent iron (ZVI) facilitated in-situ selenium (Se) immobilization and its recovery by magnetic separation: Mechanisms and implications for microbial ecology

Rapid removal of selenate in a zero-valent iron/Fe 3 O 4 /Fe 2+ synergetic system

Removal of selenium from water with nanoscale zero-valent iron: mechanisms of intraparticle reduction of Se(IV).

Efficient Removal of Trace Se(VI) by Millimeter-Sized Nanocomposite of Zerovalent Iron Confined in Polymeric Anion Exchanger

Highly efficient removal of Se(IV) using reduced graphene oxide-supported nanoscale zero-valent iron (nZVI/rGO): selenium removal mechanism

A novel combined process for efficient removal of Se(VI) from sulfate-rich water: Sulfite/UV/Fe(III) coagulation.

Enhanced Reactivity and Electron Selectivity of Sulfidated Zerovalent Iron Toward Chromate under Aerobic Conditions

Interaction of aqueous Se(IV)/Se(VI) with FeSe/FeSe2: Implication to Se redox process

Enhanced arsenic(III) sequestration via sulfidated zero-valent iron in aerobic conditions: Adsorption and oxidation coupling processes

Effects of brining on the corrosion of ZVI and its subsequent As(III/V) and Se(IV/VI) removal from water.

Effective removal of Cr(VI) from water by ball milling sulfur-modified micron zero-valent iron：Influencing factors and removal mechanism