Abstract:Zerovalent iron (ZVI) is commonly used for water treatment under aerobic conditions such as sequestration of metals. Sulfide-modified ZVI (S-ZVI) is attracting increasing attention for its easy preparation and high reactivity with environmental pollutants. The processes responsible for contaminant removal can be a complex mixture of redox, sorption, and coprecipitation processes. In this paper, ZVI and S-ZVI were used to sequester antimonite (Sb(III)). The rates of Sb(III) sequestration were determined in open, well-mixed, batch reactors. The effects of various experimental variables were investigated, including pH, iron dose, initial concentrations of Sb(III), aging time of the ZVI and S-ZVI, addition of Fe2+, mixing rate, etc. The results showed that S-ZVI can significantly enhance the Sb(III) sequestration, and under basic conditions in this study, the k obs (0.018 min−1) obtained in the S-ZVI system was approximately 15 times higher than the 0.0012 min−1 obtained in the ZVI system. Solid phase characterizations were conducted to assess the influence of sulfidation on the morphology and surface geochemistry of ZVI. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) confirmed the presence of sulfur. X-ray photoelectron spectroscopy (XPS) indicated the oxidation of Sb(III) to Sb(V) and adsorption and coprecipitation onto the iron oxides is the mainly sequestration process. The FeS layer on ZVI is more conductive than oxides and therefore accelerates electron transfer. In addition sulfidation promotes the corrosion of iron and the formation of ferrous iron, which further enhances the ferric iron oxide formation, thereby favoring adsorption and oxidation of Sb(III).

Coupled Effect of Ferrous Ion and Oxygen on the Electron Selectivity of Zerovalent Iron for Selenate Sequestration.

Facilitating Se(VI) adsorption and electron transfer by introducing αFeOOH to sulfidated zero-valent iron

Enhanced removal of Se(VI) from water via pre-corrosion of zero-valent iron using H2O2/HCl: Effect of solution chemistry and mechanism investigation.

Simultaneous Removal of Selenite and Selenate by Nanosized Zerovalent Iron in Anoxic Systems: The Overlooked Role of Selenite

Resolve the species-specific effects of iron (hydr)oxides on the performance of underlying zerovalent iron for metalloid removal: Identification of their key properties

Removal of Selenate from Water by Zerovalent Iron

Sulfide-modified zerovalent iron for enhanced antimonite sequestration: Characterization, performance, and reaction mechanisms

Enhanced Reactivity and Electron Selectivity of Sulfidated Zerovalent Iron Toward Chromate under Aerobic Conditions

Enhanced Removal of Selenate from Mining Effluent by H2O2/HCl-pretreated Zero-Valent Iron.

Enhanced arsenic(III) sequestration via sulfidated zero-valent iron in aerobic conditions: Adsorption and oxidation coupling processes

Removal of selenium from water with nanoscale zero-valent iron: mechanisms of intraparticle reduction of Se(IV).

Highly e ffi cient removal of selenite by electrolysis-assisted nano-zerovalent iron (nZVI): Implication for corrosion and reduction

Ferrous ion enhanced Fenton-like degradation of emerging contaminants by sulfidated nanosized zero-valent iron with pH insensitivity

Influence of Fe(II) on the Se(IV) Sorption under Oxic/anoxic Conditions Using Bentonite.

Zero-valent iron (ZVI) facilitated in-situ selenium (Se) immobilization and its recovery by magnetic separation: Mechanisms and implications for microbial ecology

Rapid removal of selenate in a zero-valent iron/Fe 3 O 4 /Fe 2+ synergetic system

Enhancing the Effect of Bisulfite on Sequestration of Selenite by Zerovalent Iron

Interaction of aqueous Se(IV)/Se(VI) with FeSe/FeSe2: Implication to Se redox process

Decoding the divalent cation effect on sulfidation of zero-valent iron: Phase evolution and FeS x assembly

Pivotal effects of external Fe2+ on remediation of arsenite by zero-valent iron/persulfate: Efficiencies and mechanism

A novel combined process for efficient removal of Se(VI) from sulfate-rich water: Sulfite/UV/Fe(III) coagulation.