Abstract:Niobium fluoride (NbF5) is introduced into the MgH2 + 1/4AlH(3) hydride composite by ball milling to improve the hydrogen desorption properties of the Mg-Al-H system. It is found that after being ball milled with 1 mol % of NbF5, AlH3 in the composite has almost fully decomposed and forms metallic Al, which indicates that NbF5 can significantly destabilize AlH3. DSC results show that NbF5 addition also helps reduce the peak desorption temperature of MgH2 in the composite from 324 to 280 degrees C. Isothermal desorption measurements demonstrate that MgH2 in the doped composite can rapidly release 98% of its hydrogen after desorption at 300 degrees C for 1 h, while the valued is only 46% for the undoped composite. The activation energy for hydrogen desorption of MgH2 in the doped composite is calculated to be 104.5 kJ/mol, much lower than that in the undoped composite (127.4 kJ/mol). These results suggest that NbF5 addition dramatically improves the hydrogen desorption kinetics of the MgH2 + 1/4AlH(3) composite. Dehydrogenation hydrogenation measurements reveal that the hydrogen desorption kinetics of the undoped composite declines with cycle number, whereas the NbF5-doped composite maintains good cycling stability. Microstructure studies indicate that the decline of the kinetics is attributed to the grain growth and particle agglomeration of MgH2 during hydrogen sorption cycling. However, NbF5 addition can suppress this grain growth through the formation of Nb/NbH layers surrounding the particles of MgH2 and acting both as the impediment to grain growth of Mg/MgH2 and as the gateway for hydrogen diffusion. Finally, the role that AlH3 plays in the hydrogen desorption process of the Mg-Al-H composites is discussed.

Fabrication and Optical Property Improvement of Gasochromic Switchable Mirror Based on Pd/Mg Nb2O5 Thin Film

Improved Optical Properties of Switchable Mirrors Based on Pd/Mg-TiO2 Films Fabricated by Magnetron Sputtering

Superior hydrogen absorption and desorption behavior of Mg thin films

Structure Changes and Optical Properties of Mg2ni Switchable Mirrors

Controllable Optical Transitions of Amorphous Mg and Mg-Ni Films Via Electrochemical Methods

Turning optical switching properties of Mg-Y films in electrochemical process by tailoring composition

Hydrogen Absorption–desorption, Optical Transmission Properties and Annealing Effect of Mg Thin Films Prepared by Magnetron Sputtering

Development of gasochromic sheets using thin-film switchable mirror coatings

Improved Hydrogen Storage Properties in Mg-based Thin Films by Tailoring Structures

Dynamic Transmission-Reflection Dichroism Based on Humidity-Responsive Metal-Hydrogel-metal Nanocavities

The highly tunable Mg-Ni-H switchable mirror system

Effects of Amorphous and Nanocrystalline Structures on Hydrogen-Induced Optical Performance of Modulated Mg-Gd Films with Various Composition Fluctuations.

Mg-Ni-H films as selective coatings: tunable reflectance by layered hydrogenation

Dynamic control of anapole states with phase-change alloys.

Hydrogen-induced optical properties of FC/Pd/Mg films: Roles of grain size and grain boundary

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Microstructure, Hydrogenation and Optical Behavior of Mg–Ni Multilayer Films Deposited by Magnetron Sputtering

Hydrogenation/oxidation Induced Efficient Reversible Color Switching Between Methylene Blue and Leuco-Methylene Blue

Switchable Chiral Mirrors

Fabrication and Characterization of MgF2 Anti-reflective Films Comprising Dual-Layer Prepared by Physical Vapor Deposition Technique for Optoelectronic Applications

A kinetics study on promising hydrogen storage properties of Mg-based thin films at room temperature.