Abstract:To verify the effect of oxygen vacancy on gas sensitivity, we have systematically investigated the gas-sensing performance of copper oxide/substoichiometric tungsten oxide (CuO/WO3-x) nanocomposite sensors. Oxygen deficiency in WO3-x facilitates the reaction of hydrogen sulfide (H2S) gas with chemisorbed oxygen species (i.e., O2-, O-, and O2-) at low temperature. The oxygen/sulphur exchange reaction between CuO and H2S in the sensing process can achieve room temperature operation of gas sensors. After the WO3-x nanorods were modified by a low content of CuO nanoparticles (Cu:W = 1:20), the sensors present an n-type sensing behavior. Their best working temperatures drop from 289 °C (or 386 °C) to 99 °C (or 70 °C) at which the responses are improved by 14 to 163 times for different x values. Among them, CuO(L)/W5O14 shows the highest sensitivity of 1575.7 to 10 ppm H2S at 99 °C and 171.5 to 10 ppm H2S at room temperature. Once WO3-x were loaded with a high concentration of CuO nanoparticles (Cu:W = 1:2), they exhibit a p-type behavior, and the optimal working temperatures reduce suddenly to room temperature at which CuO(H)/W18O49 displays the most sensitive response of 7.2 even toward trace amounts of H2S as low as 100 ppb. In addition, p-type CuO weakens the metal-like characteristics of W18O49 and such weakening effect enhances with an increase in the CuO content. Therefore, the sensing performance of the CuO/W18O49 composite is the best among the four CuO/WO3-x sensors. The two designs for low and high Cu/W molar ratios all achieve enhanced room-temperature H2S gas response, with a fast recovery time of ∼60 s under heating pulse, as well as an excellent selectivity, which makes the sensors a promising candidate for practical applications. Moreover, the micro-Raman spectra confirmed CuS formation and the thermal effect on the decomposition of CuS in the sensing process was studied.

Humidity and Selective Oxygen Detection by Ag2S Nanoparticles Gas Sensor

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Ag2Te Nanowires for Humidity-Resistant Trace-Level NO2 Detection at Room Temperature

Ultra-sensitive Room-Temperature H 2 S Sensor Using Ag–In 2 O 3 Nanorod Composites

High Humidity Enhanced Surface Acoustic Wave (SAW) H2S Sensors Based on Sol–gel CuO Films

Visible Light-Assisted Room Temperature Gas Sensing with ZnO-Ag Heterostructure Nanoparticles

Ultrasensitive Room-Temperature Chemical Sensors By Ag-Decorated Ultraporous Zno Nanoparticle Networks

Chemiresistive Room Temperature H2S Gas Sensor Based on MoO3 Nanobelts Decorated with MnO2 Nanoparticles

Dual Resistance and Impedance Investigation: Ultrasensitive and Stable Humidity Detection of Molybdenum Disulfide Nanosheet-Polyethylene Oxide Hybrids

Exploiting Free-Standing p-CuO/n-TiO 2 Nanochannels as a Flexible Gas Sensor with High Sensitivity for H 2 S at Room Temperature

Ultrasensitive NH3 sensor based on Ag3PO4&nano-Ag co-modified SnS with humidity compensation

Ag Nanoparticle-Modified ZnO–In2O3 Nanocomposites for Low-Temperature Rapid Detection Hydrogen Gas Sensors

ZnO Nanoparticle-Based MEMS Sensors for H 2 S Detection

An ultra-sensitively ammonia-responsive gas sensor based on Ag@sulfur nanosheets

In-situ grown hydrated tungsten oxide nanosheets for low temperature ppb-level NO2 detection with alleviated humidity interference

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection

A High Performance Hydrogen Sulfide Gas Sensor Based On Porous Alpha-Fe2o3 Operates At Room-Temperature

Humidity-independent Gas Sensor Based on Pt/SnO2/NiO with Advanced CO Sensing Capabilities

Enhancement of Low-Temperature Gas-Sensing Performance Using Substoichiometric WO 3– x Modified with CuO

MoO2 Pump-Enhanced Flexible TiO2 Nanojungle-Based Chemiresistors for Rapid Room-Temperature Detection of H2S at Parts-per-Billion Levels

H2S Sensing under Various Humidity Conditions with Ag Nanoparticle Functionalized Ti3C2Tx MXene Field-Effect Transistors.