Abstract:Flexible superhydrophobic surfaces have been attracting more and more attention due to their foldable property. However, the superhydrophobic structure was easily damaged or destroyed owing to their poor interfacial force between substrate and superhydrophobic coating. Herein, fluorinated silica nanoparticles (F-SiO 2 ) were sprayed onto the wet poly(amide–imide) (PAI) surface, which made F-SiO 2 easily went into PAI substrate to enhance the durability of superhydrophobic surface. The PAI/F-SiO 2 flexible surface exhibited a water contact angle (CA) of beyond 160° and a sliding angle (SA) of as low as 3°, while the tensile strength (34 MPa) was comparable to that of PAI substrate (35.8 MPa). Encouragingly, the superhydrophobicity and hierarchical porous structure of PAI/F-SiO 2 surface were maintained even they were folded by 5000 times or underwent sandpaper abrasion test (500 cm of wear on a 1200 grit sandpaper under 50 g load), while the nanocomposites failed the sandpaper abrasion test when F-SiO 2 were sprayed onto completely dried PAI surface. More importantly, the CA and SA just slightly decreased when PAI/F-SiO 2 surfaces were heated at 300 °C for 24 h due to the unique surface morphology and high thermal stability of PAI, which is one of the highest thermal stabilities for flexible superhydrophobic films. In addition, PAI/F-SiO 2 surfaces maintained superhydrophobic after hot water jet impact, acid–base immersing, UV irradiation, and ultrasonic treatment, indicating the fabricated surfaces could be used for practical application especially under harsh conditions. Furthermore, the superhydrophobic surfaces possessed icephobic properties. It should be noted that PAI/F-SiO 2 surfaces showed such excellent properties, although their fabricating procedure did not undergo any optimization. This wet spraying method was also used to fabricate flexible superhydrophobic surfaces with other polymers as substrates such as poly(acrylic acid) (PAA), thermoplastic polyurethane (TPU), polystyrene (PS), and poly(vinyl alcohol) (PVA). Therefore, the simple strategy provided a general route to prepare flexible superhydrophobic films with high durability.

Superhydrophobic coating with ultrahigh adhesive force and good anti-scratching on elastomeric substrate by thiol-ene click chemistry

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Fabrication of Air-Permeable Superhydrophobic Surfaces with Excellent Non-Wetting Property

Facile Preparation Of A Mechanically Robust Superhydrophobic Acrylic Polyurethane Coating

Abrasion‐Resistant, Hot Water‐Repellent and Self‐Cleaning Superhydrophobic Surfaces Fabricated by Electrophoresis of Nanoparticles in Electrodeposited Sol–Gel Films

Preparation of Durable Superhydrophobic Coatings Based on Discrete Adhesives

Silica Coating with Well-Defined Micro-Nano Hierarchy for Universal and Stable Surface Superhydrophobicity

A Facile Fabrication of Robust Thiol-Ene/hierarchically Mesoporous Silica Nanoparticles Hybrid Superhydrophilic Coating Films under UV Radiation

Preparation of High Wear-Resisting Superamphiphobic Robust Film by Self-Assembled Monolayer Surface Reaction

Durable, Self-Cleaning and Anti-Fouling Superhydrophobic Coating Based on Double Epoxy Layer

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

Design of Robust Superhydrophobic Coatings Using a Novel Fluorinated Polysiloxane with UV/moisture Dual Cure System

Fast Fabrication of Silicone-Modified Polyurethane/sio2 Composite Superhydrophobic Coating with Excellent Anti-Icing and Self-Cleaning Behaviour

Template assisted preparation of silicone (polydimethylsiloxane) elastomers and their self-cleaning application

A green, one-step and general engineering platform for high-adhesion superhydrophobic surfaces

Facile fabrication of flexible superhydrophobic surfaces with high durability and good mechanical strength through embedding silica nanoparticle into polymer substrate by spraying method

Fabrication of a Scratch & Heat Resistant Superhydrophobic SiO2 Surface with Self-Cleaning and Semi-Transparent Performance

Preparation and Basic Properties of Superhydrophobic Silicone Rubber with Micro-Nano Hierarchical Structures Formed by Picosecond Laser-Ablated Template

A fully waterborne coating system based on thiol-ene click reaction for robust and self-healing superhydrophobic surfaces

A Veil-over-sprout Micro-Nano PMMA/SiO2 Superhydrophobic Coating with Impressive Abrasion, Icing, and Corrosion Resistance

Suppression of surface charge on micro- and nano-structured superhydrophobic silicone rubber