Abstract:Physically unclonable functions (PUFs) are increasingly adopted for low-cost and secure secret key and chip ID generations for embedded and IoT devices. Achieving 100% reproducible keys across wide temperature and voltage variations over the lifetime of a device is critical and conventionally requires large masking or Error Correction Code (ECC) overhead to guarantee. This paper presents an Automatic Self Checking and Healing (ASCH) stabilization technique for a state-of-the-art PUF cell design based on sub-threshold inverter chains. The ASCH system successfully removes all unstable PUF cells without the need for expensive temperature sweeps during unstable bit detection. By accurately finding all unstable bits without expensive temperature sweeps to find all unstable bits, ASCH achieves ultra-low bit error rate (BER), thus significantly reducing the costs of using ECC and enrollment. Our ASCH can operate in two modes, a static mode (S-ASCH) with a conventional pre-enrolled unstable bit mask and a dynamic mode (D-ASCH) that further eliminates the need for non-volatile memories (NVMs) for storing masks. The proposed ASCH-PUF is fabricated and evaluated in 65nm CMOS. The ASCH system achieves "0" Bit Error Rate (BER, < 1.77E-9) across temperature variations of -20°C to 125°C, and voltage variations of 0.7V to 1.4V, by masking 31% and 35% of all fabricated PUF bits in S-ASCH and D-ASCH mode respectively. The prototype achieves a measured throughput of 11.4 Gbps with 0.057 fJ/b core energy efficiency at 1.2V, 25°C.

A Reliable Physical Unclonable Function Based on Differential Charging Capacitors

A Strong Physical Unclonable Function With Virgin State Embedded Phase Change Memory

A New Physical Unclonable Function Architecture

A Novel Configurable RO-Obfuscated PUF Design with Machine Learning Immunity

A Highly Reliable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source

An Invasive-Attack-Resistant PUF Based on Switched-Capacitor Circuit

High-Speed and Reconfigurable Physical Unclonable Functions Based on SOT-MTJ Array

Optimization of Rram-Based Physical Unclonable Function with A Novel Differential Read-Out Method

A Strong Physical Unclonable Function with Machine Learning Immunity for Internet of Things Application

First demonstration of reconfigurable and low-power strong physical unclonable function empowered by FeFET cycle-to-cycle variation

Ferroelectric FET-based strong physical unclonable function: a low-power, high-reliable and reconfigurable solution for Internet-of-Things security

ASCH-PUF: A "Zero" Bit Error Rate CMOS Physically Unclonable Function with Dual-Mode Low-Cost Stabilization

Concealable Physically Unclonable Function Chip with a Memristor Array

DRAM-Based PUF Utilizing the Variation of Adjacent Cells

A Highly Reliable Strong Physical Unclonable Function Design Based on FPGA

Reliability Analysis and Performance Evaluation of STT-MRAM-Based Physical Unclonable Function

A highly stable R-Diode-based physical unclonable function

Model and Physical Implementation of Multi-Port PUF in 65 Nm CMOS

Physical Unclonable Function Chip based on SOT-MRAM in 180 nm CMOS Technology

25.2 A Reconfigurable RRAM Physically Unclonable Function Utilizing Post-Process Randomness Source with <6×10−6 Native Bit Error Rate

Architecture and Physical Implementation of Reconfigurable Multi-Port Physical Unclonable Functions in 65 Nm CMOS.