Abstract:The Journal of Strain Analysis for Engineering Design, Ahead of Print. This paper investigates the expansion of circular aluminium tubes using a rigid die under quasi-static loading conditions through experiments and finite element simulations. This study primarily focuses on the expansion of thin-walled tubes with a thickness ranging from 3.95 to 5 mm, and the finite element model is in good agreement with the experimental results. Additionally, the study emphasizes the impact of the coefficient of friction, energy dissipation properties and the diameter-to-thickness ratio on the energy expenditure associated with the expansion process of aluminium tubes using a rigid die. This study use Digital Image Correlation (DIC) technology to evaluate pictures obtained during experimental procedures, enabling accurate quantification of displacements, stresses, and rotations of major planes. The findings indicate that the energy absorption resulting from friction plays a significant role, with the coefficient of friction serving as a important parameter throughout the expansion process. The energy absorbed by the friction between tube-die contact surfaces was significantly higher than that absorbed by the plastic bending of the aluminium tube. For specimen AT-5.0-1, the energy absorbed by friction and bending is 3352 and 570 J, respectively. Result shows that a notable increase in the ultimate load, rising from 46.03 to 61.54 kN, is required for expanding the aluminium tube with a thickness of 3.95 to 5.0 mm. The local strain patterns seen on the surface of the tube offer useful insights, therefore enhancing researchers' ability to examine particular points on the specimen's surface without the need for fixed reference points prior to conducting experiments.

Energy Absorption of Expansion Tubes Using a Conical-Cylindrical Die: Theoretical Model

Energy absorption of expansion tubes using a conical–cylindrical die: Experiments and numerical simulation

A Theoretical Study of the Expansion Metal Tubes

Axial Compression and Energy Absorption Characteristics of Reduction Tubes Using a Die under Impact Load

Theoretical prediction and numerical studies of expanding circular tubes as energy absorbers

An Improved Two-Arcs Deformational Theoretical Model of the Expansion Tubes

The energy absorption of a shrinking-expanding circular tube: An experimental and numerical investigation

A Novel Deformation Mode of Expansion Tubes Accounting for Extra Contact

Study on the energy absorption of the expanding–splitting circular tube by experimental investigations and numerical simulations

A Theoretical Model of the Inversion Tube over a Conical Die

A Theoretical Model of the Shrinking Metal Tubes

Expansion of Sandwich Tubes With Metal Foam Core Under Axial Compression

Effect of Geometry on Energy Absorption of Reduction Tubes Using a Die - A Numerical Study

Behaviour of expansion tubes under impact load: Deformation mode and mechanical response

Investigation of circular aluminium tube expansion by rigid die as energy absorbers using digital image correlation technology

Theoretical Prediction and Numerical Analysis of Axially Crushed Square Tube with Induced Folding Patterns

Numerical and Experimental Investigations on the Expansion Tube Energy Absorber

Theoretical Model of a Metal Tube under Inversion over Circular Dies

Deformation Behavior of Tube in Electromagnetic Forming with an External Die

An Analytical Study for Global Buckling of Circular Tubes under Axial and Oblique Compression

Plastically Deformed Tubes Subjected to Mechanical Expansion Processes