Abstract:High-temperature superconducting traction transformers (HTSTT) have the merits of small size and lightweight in comparison with their conventional counterparts. This article reports the development progress of a 6.6 MVA HTSTT operating at 65 K, including the design, testing, and system cooling. The introduction of flux diverters and an optimized winding design realized a short-circuit impedance higher than 43% and AC loss less than 3 kW. The insulation structure was designed to pass insulation tests specified in standard in China GB/T 25120-2010. An open cooling system with reduced pressure was developed, which realized the efficiency of the 6.6 MVA HTSTT above 99%. Before assembling the prototype transformer, we conducted tests for critical current and dielectric performance of the HTS double pancake coils (DPC) used in high-voltage (HV) and low- voltage (LV) windings to verify the current-carrying and insulation performances of each DPC. Finally, we measured the critical current and no-load loss of the HTSTT prototype at 77 K. Test results showed that the mass of the transformer is 33% less than conventional transformers. At 77 K, the critical current of the LV winding and HV winding is higher than 700 A and 50 A, respectively. Moreover, the HTSTT on a no-load test reached the test voltage of 25,000 V and loss of 6 kW. In the next step, we will continue to conduct experimental research, and verify the feasibility of the HTSTT on the train, and develop a circulating cooling system, all meeting the commercial requirements of the HTSTT.

Electromagnetic Design of High-Temperature Superconducting Traction Transformer for High-Speed Railway Train

Design, development, and testing of a 6.6 MVA HTS traction transformer for high-speed train applications

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

Design of a 35 kV high-temperature superconducting synchronous machine with optimized field winding

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

Thermal Optimization of a Totally Enclosed Forced Ventilated Permanentmagnet Traction Motor Using Lumped Parameter and Partial Computational Fluid Dynamics Modeling

Design and Key Performance of 2G HTS Coils for High Speed Superconducting Maglev Application

Basic Coil Structure for Rapid Charge in a Low-Frequency and High-Efficiency Wireless Power Transmission System Using High-Temperature Superconducting Coil for Railway Vehicle

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Comparison of Long Stator Three-Phase Winding Structures in a 2G HTS LSM for Maglev Application

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Development of a Three-Phase HTS Power Transformer

Design and Analysis of a Small-Scale HTS Magnet Used in a Linear Synchronous Motor for Future High-Speed Superconducting Maglev Applications

Study on Electrodynamic Suspension System with High-Temperature Superconducting Magnets for a High-Speed Maglev Train

A Power Electronics Traction Transformer for High-Speed Trains in China: Toward a Lighter and More Compact Traction System

Electric Power Transmission Characteristics of a Wireless Power Transmission System Using High Temperature Superconducting Coils for Railway Vehicle

R&D of No-Insulation HTS Magnets Using 2G Wires in a Prototype for Maglev Applications

On the Future Sustainable Ultra-High-speed Maglev: A Superconductor Magnet Technology Enabling High Energy Efficiency and Robustness

A Single Phase Model 9 Kva High-Temperature Superconducting Power Transformer

Advances in Application and Future Prospects for Superconducting Bulk Materials