Abstract:High-performance vertical vibration isolators are required in precision instruments and physical experiments to reduce the seismic noise, which limits the instrument performance and measurement results. For example, inertial references are needed in interferometric gravitational wave detectors and absolute gravimeters, in order to separate the useful signal from noise. Microseisms typically occur at around 0.07 Hz. The secondary microseisms occur at about 0.14 Hz. Buildings usually wobble at frequencies between 0.1 and 1 Hz. To reduce all these vibrations would require a spring-mass system with a resonance frequency lower than 0.05 Hz. The most commonly applied techniques use a passive vertical isolation system, which is easy to set up and cheap to build. However, to achieve low cut-off frequency, such as 0.05 Hz, there requires longer than 100 m static deflection for a simple passive isolator, which is impractical in most applications. An ultra-low-frequency active vertical vibration isolator, based on a two-stage beam structure, is proposed and demonstrated in this paper. Two beams are connected to a frame with flexural pivots. The upper beam is suspended from the frame with a normal hex spring. The lower beam is suspended from the upper one by a zero-length spring. The flexural pivots of the upper beam are not vertically placed above the pivots of the lower beam. With this special design, the attachment points of the zero-length spring to the beams can be moved to change the effective stiffness. A laser reflectometry is used to detect the angle between the two beams. A laser collimator, a mirror, a beam splitter and an optical detector are fixed to the upper beam, and another mirror is fixed to the lower beam. A laser beam from the collimator is directed to the detector via the mirrors and the beam splitter. The output of the detector is proportional to the angle between the two beams. The minimum detectable angle is 36 nrad. The angle signal is sent to a circuit to generate a control signal, which drives a voice coil mounted between the lower beam and the frame to maintain the angle between the two beams to a fixed value. The isolation system can achieve a natural period of 100 s by carefully adjusting the attachment points of the zero-length spring and the feedback parameters. This type of isolator has a simpler and more robust structure than the famous active vibration isolator-the super spring. The system is promising in applications such as precision instruments and experiments, especially in absolute gravimeters.

Ultra-low Frequency Vertical Vibration Isolators for Absolute Gravimeters

An Ultralow-Frequency Active Vertical Vibration Isolator with Geometric Antispring Structure for Absolute Gravimetry

Ultra-low Frequency Vertical Vibration Isolator Based on LaCoste Spring Linkage

Ultra-Low-Frequency Vertical Vibration Isolator Based on A Two-Stage Beam Structure

Review on the Development of Vibration Isolators for Absolute Gravimeter

A Long-Stroke Horizontal Electromagnetic Vibrator for Ultralow-Frequency Vibration Calibration

Study and Establishment of the National Standard of the Ultra-low frequency Vibration

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

A vibration correction method for free-fall absolute gravimeters

An Optimized Vibration Correction Method for Absolute Gravimetry

Ultra-low frequency vertical vibration isolation system based on zero-length spring

Reducing the Time Consumption of Vibration Correction Methods for Absolute Gravimeters

Correction of Vibration for Classical Free-Fall Gravimeters with Correlation-Analysis

A Vibration Compensation Method for Absolute Gravimeters

Modeling and analysis of a two-stage tri-linear pendulum ultra-low frequency horizontal vibration isolator with experimental investigations

Self-Vibration Analysis of the Free-Fall Absolute Gravimeter

Compact active vibration isolation and tilt stabilization for a portable high-precision atomic gravimeter

Ultra-low Frequency Active Vibration Isolation in High Precision Equipment with Electromagnetic Suspension: Analysis and Experiment

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

Ultra-low frequency active vibration control for cold atom gravimeter based on sliding-mode robust algorithm